@Ali Imtiaz reverse polarity on one of the drivers, i.e. one driver will be wired correctly, positive from amp to positive on driver, negative on amp to negative on driver, while the other will be positive from amp to negative on driver, and negative on amp to positive on driver. Wired like that, when one sub moves outward, the other will move inward, out of phase with each other but because they are face to face they will be moving in the same direction. Effectively, you have the same amount of cone area but double motor force. Good for tight areas but not very practical tbh.
@@realchronal Good thinking, man. I thought they were trying to talk but couldn't hear each other (because of the loud music). I changed my mind, I think you're right.
No caso do vídeo a possibilidade é de contato entre os cones, talvez até esteja ligado correto com polaridade inversa porque o movimento é muito rápido. No caso de subwoofers nós carros que forem montados cara a cara, é necessário fazer a mesma coisa ou os graves vão se anular, ou deixar em ângulo mesmo.
Yes actually wired the same phase that arrangement wiill cancel each other out. That's the same technology in a nutshell that they use in modern cars to take away engine noise on an interior
@@brianspurlingsr.762 switch the wire terminal. To one speaker red to red and black to black. To the 2nd one red to black and black to red. The 2nd speaker will now do the opposite and move with the speaker in phase. Just switch the terminals for one speaker
Few years ago one senior audiophile guy made with 2 21' Dayton Audio woofers driven with 1k power amplifier, no box at all. Both woofers are out of the phase, face to face with gap about 20mm. He described the sound is far superior than ordinary subs. His video is in RUclips
this setup was used in 80's for its ability to shrink Vas parameter to half, but in enclosure! this aint subwoofer beacuse of aerial shortcut of sound waves, this just produes incredible amount of distortion. google this setup and use cabinet for at least one speaker, and it can be half as would be with single speaker, thats the Vas.
Juntar os dois alto falante assim deixa o grave e a vibração com menos qualidade, uma madeira de 5/9mm seria o ideal para ter qualidade na caixa e no grave
I've seen this type setting of two pair speaker made in Germany (GRUNDIG)one pair left and another pair was right those pair speakers were fixed in brass frame.
Isobaric load, clamshell Push / pull Reason: "2 subwoofer" can effectively occupy the space of a "single woofer" enclosure, while not sacrificing in output. Both sub faces need to move up and down as 1 driving mass in order for the science to work
They call that Arrangement push and pull like Dr Seuss's zebra that has two heads. They need to be in an in an enclosure and also one speaker needs to be wired opposite phase so that they actually push and pull at the same rate and it does double the air movement but it needs to be done correctly you can't just throw s*** together and expect it to be dynamic sounding
ummm. u have to have a little bit of a gap between them or ur gonna have parts touching that shouldn't. stack a few 1/4 or 3/8 nuts between the speakers...
Ну если с другой стороы провода подключены одинаково,то получается если один диффузор движется вперед,то и другой идет вперед,в результате они гасят друг друга,так что низа должны падать,а не усиливаться.Тогда какой же это сабвуфер?Хотя если они подключены к разным каналам,то может фаза не обязана совпадать?
For those wondering.... This is an isobaric clamshell configuration. The drivers are wired in opposite polarity from one in other which will make one driver push out while the other pulls inward, so they move as one. The reason for doing this, typically, would be to fit a driver into a smaller enclosure. In this configuration the motor force is essentially doubled allowing a driver to fit in an enclosure that is half the volume. It is not used often because you will have to double the driver cost and amplifier requirements with no additional output.
Y solo conectas una para que la otra reciba el movimiento es decir la frecuencia con la que se mueve la bocina la segunda bocina se vería la frecuencia en pulsos básicamente un generador electrónico también 😅
Maybe next time wire them out of phase so that would work
how to connect out of phase.pls.tell me,thanks
@Ali Imtiaz reverse polarity on one of the drivers, i.e. one driver will be wired correctly, positive from amp to positive on driver, negative on amp to negative on driver, while the other will be positive from amp to negative on driver, and negative on amp to positive on driver. Wired like that, when one sub moves outward, the other will move inward, out of phase with each other but because they are face to face they will be moving in the same direction. Effectively, you have the same amount of cone area but double motor force. Good for tight areas but not very practical tbh.
Exactly what I thought
They appear to be out of phase, looks like neg just has red with a black stripe not full black insulation.
@Dayton R. that means nothing lol. You can use red for ground and black for positive if you really want to, those are just standardized colors
i think they are connected to be out of phase so they don't fight each other
yes
Would putting this in a box with a port sound good?
@@realchronal Good thinking, man. I thought they were trying to talk but couldn't hear each other (because of the loud music). I changed my mind, I think you're right.
Same here but the surround could break down over time
@@briannahollon3420 another reason doing this is absolutely meaningless and you should just build a box to put them in
A MINI ISOBARIC PUSH-PULL, PUT THEM IN A PORTED BOX AND LES SEE THE RESULT..
✌️😃👍
No caso do vídeo a possibilidade é de contato entre os cones, talvez até esteja ligado correto com polaridade inversa porque o movimento é muito rápido. No caso de subwoofers nós carros que forem montados cara a cara, é necessário fazer a mesma coisa ou os graves vão se anular, ou deixar em ângulo mesmo.
Isobearic woofer design very nice try changing phase of one by swaping power and ground
Yes actually wired the same phase that arrangement wiill cancel each other out. That's the same technology in a nutshell that they use in modern cars to take away engine noise on an interior
wire one in phase then wire the other out of phase
How do you do that
@@brianspurlingsr.762 switch the wire terminal.
To one speaker red to red and black to black.
To the 2nd one red to black and black to red. The 2nd speaker will now do the opposite and move with the speaker in phase. Just switch the terminals for one speaker
Sono gia in controfase.. 😂
Not a subwoofer
You have used ZEBRONICS ZEB-VITA PLUS SPEAKERS 8w 4ohm😊😊
Few years ago one senior audiophile guy made with 2 21' Dayton Audio woofers driven with 1k power amplifier, no box at all. Both woofers are out of the phase, face to face with gap about 20mm. He described the sound is far superior than ordinary subs. His video is in RUclips
Congratulations bro for 1 million views❤️❤️😁😁
the amplifier hurts the most
Why? Amp looks fine. Don't need 100+ watts for small drivers.
A push-pull need a box...
@UCKT2w4SwhzFoyov9ooQONEw What phase... They are working open air... Tell me more about what you think.
this setup was used in 80's for its ability to shrink Vas parameter to half, but in enclosure! this aint subwoofer beacuse of aerial shortcut of sound waves, this just produes incredible amount of distortion. google this setup and use cabinet for at least one speaker, and it can be half as would be with single speaker, thats the Vas.
Mini caminhão estranho 🤙🏼😂😂🔥
Estranho
Isso estraga o alto falante
😮😮😮😮😮😮
I saw you used pam8610 amplifier that is 30w and best sound and bass
Nice . Bandpass Connection is more powerful
He has them wired in parallel. Don’t do that your setting up a mortal combat for speakers.
❤❤ so good 👍👍
Это не сабвуфер а бред. Даже при подключении одного из динамиков в противофазе, басов не будет без коробки.
Tá errado! , um auto falante tem que está na polaridade contrária, para que haja sincronização no cone.
Juntar os dois alto falante assim deixa o grave e a vibração com menos qualidade, uma madeira de 5/9mm seria o ideal para ter qualidade na caixa e no grave
Very nice even i could not make that
pam8610 doing a good job
Its good 👍👍👍
That’s now how speakers work 🤣
Yo viendo esto: hora de transformar mi parlante genérico en JBL jajaj
I've seen this type setting of two pair speaker made in Germany (GRUNDIG)one pair left and another pair was right those pair speakers were fixed in brass frame.
How does that work 2 speakers facing each other wouldn’t this hurt the speakers and what’s good about that?
Главное включить их в противофазу, как на видео!!!!!! Если подключите оба правильно, порвете нахрен!!!!!
Это как это?
@@lisint2501на одном плюс к плюсу, минус к минусу, на втором наоборот
He is trying to make another speaker 😂😂
does that means that they cancelled each other out?
Isobaric load, clamshell
Push / pull
Reason: "2 subwoofer" can effectively occupy the space of a "single woofer" enclosure, while not sacrificing in output.
Both sub faces need to move up and down as 1 driving mass in order for the science to work
मजेदार और दुनिया के सबसे तेज कीजिए दिखाओ बनाकर और यह तो सबसे मजेदार था,
please insert into the speaker box
Здесь так много иностранцев, очень хочу перевести на их язык слово "Фуета"
На инглиш будет бул щет:)
На английском будет "bull shit"
Can we creat electricity from another speaker ?
They call that Arrangement push and pull like Dr Seuss's zebra that has two heads.
They need to be in an in an enclosure and also one speaker needs to be wired opposite phase so that they actually push and pull at the same rate and it does double the air movement but it needs to be done correctly you can't just throw s*** together and expect it to be dynamic sounding
they are warriors they fight like gladiators
i mean in the old days they would take speakers and position them like that to push pull... but you need a box my guy.
Pam8610 is great amp for small speakers
Try it with box😊😊
Uh, those are supposed to be out of phase...😭
We get boosted bass in that way
Cool sound wow 😮
ummm. u have to have a little bit of a gap between them or ur gonna have parts touching that shouldn't. stack a few 1/4 or 3/8 nuts between the speakers...
Super. Ail. ❤❤❤
Distortion from Saturation, or, How to tell when someone doesn't know what they're doing.
2inch?
where can i buy that speaker sir?
Do a band pass box with the speakers
Music name ?
Isobaric? Why
Why not
Isobaric
One reason is when you are limited on enclosure space. Another is, and i personally dont know if this is true, to lower distortion.
É qual composto químico
Have them, still face to face, in their own different sized, optimum ported, chambers.
You have ZEBRONICS ZEB-VITA PLUS SPEAKERS 8w 4ohm
Ну если с другой стороы провода подключены одинаково,то получается если один диффузор движется вперед,то и другой идет вперед,в результате они гасят друг друга,так что низа должны падать,а не усиливаться.Тогда какой же это сабвуфер?Хотя если они подключены к разным каналам,то может фаза не обязана совпадать?
One of them has the polarity backwards.
Что за }{уета!?
Weird how you did that design 😮
Cool dude😎
can't remember last time I saw this but was tested it only improves output by a small amount so it is not worth the extra cost, parts and power.
Can you make a video about makeing a box for that
It causes overheating
Nice 🔥🔥
For those wondering.... This is an isobaric clamshell configuration. The drivers are wired in opposite polarity from one in other which will make one driver push out while the other pulls inward, so they move as one. The reason for doing this, typically, would be to fit a driver into a smaller enclosure. In this configuration the motor force is essentially doubled allowing a driver to fit in an enclosure that is half the volume. It is not used often because you will have to double the driver cost and amplifier requirements with no additional output.
Wire one out of phase next time
An isobarik banger.
Wtf😂😂
Bro details me bhi btaye yr.....👍
Hii🌹💔😜🏉
Опять этот индус всё спаял без аллюминиевых проводов...
接続が同相だから、対面スピーカーにするなら逆像で繋げば、振動は増えると思った
This will make the speaker move more
bro ye speaker online milega kya
they are just fighting which one is gonna push more atp.. 😭🙏
How to do you bro
Is this mi subwoofer😮
Vha bhai bhot shai me bhe try kru ga isha
Full video❤
Kon sa speaker ha and price
О, симметричная акустика.
Надо было на одном динамике правильно распаять полярность, а на другом наоборот они бы двигались в одну сторону синхронно.
Я думаю он так и сделал, видно что в одну сторону оба двигаются
@@artyr1291 по проводам видно что он их одинаково запаял то есть двигаются они один на другой, тем самым подавляя работу друг друга
@@Glazami они зеркально расположены.
@@-VANO- и двигаются друг напротив друга. Создавая друг другу помеху
@@Glazami учи физику.
Itu polarisasi di balik ya beraty?
It's called isaberic speaker set-up
Глубокие низа и пердёж, немного разные вещи.
Thats is not true depends on how many omes
Nyc
This isobaric style isn't often seen.
Tutorial please
Wire 2x 8-ohm drivers in parallel, out of phase (one wired with proper polarity, the other opposite). Total nominal impedance should be ~4 ohms.
You gonna destroy those in phase
Más falso que el amor de ella jaja 😂
Бред, когда динамики выходят, куда им девать воздух? Между ними должен быть проём
они в противофазе.
@@-VANO- как понять?
@@Auto-bike тяни - толкай.
Один помогает другому.
@@-VANO- дак они одновременно толкают друг друга
@@Auto-bike когда один дин идёт вовнутрь себя второй наружу.
Возьмите динами и батарейку и поиграйтесь.
Для чего это? 😮
It just
1st spk = out + to + spk and out - to - spk
2nd spk = out + to - spk and out - to + spk
Hmmm. Smart
Bhai Mujhe bhi Lena hai price
speaker fight! with that size I don't tinhk gonna do any bass too.
Y solo conectas una para que la otra reciba el movimiento es decir la frecuencia con la que se mueve la bocina la segunda bocina se vería la frecuencia en pulsos básicamente un generador electrónico también 😅
Doesn't that hurt the speakers
No but makes horrible sounds
Nice video
Song name
NCS song
@@TheFactsTop960 ncs ka konsa ?
@@TheFactsTop960 full name ?
Kaushal bhopi - Paan Mawa 🗿🍷
Speaker name?
Us machine ka name kiya ha
Tpa3110
Pam8403