Making Windsor Continuous Arm Chair
HTML-код
- Опубликовано: 21 мар 2020
- BI-LIM woodworks 2020
Drawing by Curtis Buchanan
www.curtisbuchananchairmaker....
American walnut (dried)
Osmo polyx oil
Instagram
/ bi_lim_
Blog
bi-lim.net/
Web
bi-lim.com/
Music licenses/
Chris Zabriskie의 Prelude No. 2은(는) Creative Commons Attribution 라이선스(creativecommons.org/licenses/... 따라 라이선스가 부여됩니다.
출처: chriszabriskie.com/preludes/
아티스트: chriszabriskie.com/
Chris Zabriskie의 Prelude No. 20은(는) Creative Commons Attribution 라이선스(creativecommons.org/licenses/... 따라 라이선스가 부여됩니다.
출처: chriszabriskie.com/preludes/
아티스트: chriszabriskie.com/ - Хобби
you guys made a pretty nice chair guys
That turned out amazing. Beautiful chair.
beautiful chair
Fantastico una buena obra de arte los felicito
Beautiful work, I love your use of jigs to perfect this.
What angle is the drilling? Mesmerising work
I am amazed your spectacular job!!! fan from Mongolia! :D
예뻐요...
너무 멋지네요~~작품이네요!!
감사합니다^^
정성 가득한 작업 잘보았습니다 ^*^
감사합니다^^
beautiful....
wonderful......
너무 멋집니다.
감사합니다! ^^
Incredible workmanship! It was mesmerizing to watch. You are doing the walnut such homage! Well done indeed!
Thank you! Terry!!
대단하심다
감사합니다. 이호정님^^
왜 이렇게 구독이 빨리 안 느는 거야 ㅋㅋ 100만명 가자!
ㅋㅋ 환갑때까지 열심히 해보겠습니다
ㅎㅎ 역쉬 바이림 만드는 과정이 예술이네요..^^
감사합니다 유사장님 ㅋㅋ
@@bilimwoodworks하이 개그시네요~ 바사장님~
Perfeito!!! Uau!!
Obrigado!
멋져요~👍👍👏👏
와!! 고선생님!! 쩔좀 해주세요 ㅋㅋ
perfect
Thank you!
Nice work! It looks like you joined two workbench tops overlapping two separate workbench bases or supports. What did you use to keep them aligned and fastened together? Thanks.
I used the wedges under the legs to level the two benches, then clamps were used to secure the adjacent legs.
Parabéns
멋집니다 ^^
혹시 도현아빠님 아니신가요? 감사합니다^^
@@bilimwoodworks 네 ^^
do you have plans for that jig in 11:16 ?
Прекрасная работа! Где вы раздобыли чертежи?
www.curtisbuchananchairmaker.com/
캬캬캬
크크크
혹 테이퍼 드릴? 구입처나 이름 알려줄수있나요??
Hi! What Drill guide is that?
Kanzawa k802 (japan)
@@bilimwoodworks thanks! I love your work! You’re top!!
@@MrBorrego23 I love you
Sorry. A Windsor chair should never be made on a CNC machine. It must be rived, steamed and shaped with a draw knife. All the holes should be drilled with a brace and bit. It's not a Windsor chair unless it's been made by hand.
amazing idea sand the wood then use your best hand tools on wood impregnated with grit wow people are so stupid. ps this is not windsor chair making this is a powertool attempt at real woodworking ie green wood working and ancient traditions. also glueing with wood glue is a silly idea as if the joints shrink you cant fix it you should use horse glue. i would suggest going and learning the real craft not this imitation method.
I use dried wood.