Hey hey 906 great to see ya thank you for checkin it out. Those smaller saws are sure fun to run in their type of wood, nice and light. Appreciate you being here. 🌲❤🌲✊
Great video! Love watching axes and saw in use. Been trolling the old logging footage from the 30’s and 40’s. That two man you are right! Tree Fella and 307 knocked it outta the park with that footage! I smiled all day on that one! We all walk together brother! Great content! Keep em coming!
Good show Tazman. Two nice saws you got there. Nice to see the 026 out in the woods again. Looks to be running & cutting well there for you. The Stihl 026’s are still my favourite saws. I’ve not used many other saws, so I don’t have much to compare it to. Still building up my 026 collection & working on a couple of re-build projects with the 026’s that will keep me going for a while. That 350 sounds nice & looks like it was cutting really well too. I could hear a whistling sound coming from the 350, like a turbo whistling noise. Sounds awesome. Maybe I’ll look out for a 350 one day & give it a go. Nice channel Tazman, I’m enjoying your videos and it’s great to see you running the 026. It is obviously a saw that I have a good connection with & appreciate & value also. Stay cool dude. Respect ✊🏼
Hello Jake. The whistling sound comes from the air intake. Alot of husky saws make the same sound especially the higher rpm saws. Thank you for your support. 🌲❤🌲✊🪓
@@tazman-kennyfuller Very close to Canada. I live and work very close to China, Korea and Japan also. Russian Far Eastern "TAIGA". Glad to meet ya here!
Thank you Brother. I love getting to spend time getting fresh air with my kids no doubt. They are pretty darn good help. I appreciate you brother. 🌲❤🌲👍
My 026 came with a 19 inch bar with a .325, .050, 74 chain on it. I had a 18 inch, .325, .05, 68 Oregon bar on it for a while but like the slightly longer bar, both full comp.
Thank you John. I love the 026. I have never run .325 on my 26. When I bought it new I had a 24 inch skip tooth on it for slashing and it worked great. 🌲❤🌲✊🪓
My crash damaged 026 had an 19 inch bar marked .325, .050,74, which is a 20 inch chain. I sanded the bar down and repainted it and put its .325chain on it. Be careful changing the rim sprocket. It takes a big one, which I had a hard time finding. I have several extra 3/8 rim sprockets for my big saws but they were much to small to fit the .026. The .325ought to be a better chain for the 026 than the 3/8. I know it balances out better with its 19 inch bar than it did with a solid 20 inch bar.
Great saws and video! My 026 is starting to grow on me a little. Still dont like the switch but for smaller stuff its a nice break from the 395s weight. I can see it getting used a lot around the mill. STAY SAFE Brother and thanks for the shout out!!!
@@tazman-kennyfuller everythings goin good here!! Gettn ready for a big road trip in 10 days. Was sposed to be Buckinstock but instead its just a vacation. Gonna be some good surprises on the channel i hope!
@@tazman-kennyfuller its really cool. Ive never been able to do these kinds of trips before. Thanks to my job im able to do it. Not the best job but it allows me do do this stuff.
Thank you for watching Ed gotta get the smaller ones out every once in a while. They usually dont go to the woods but that day the wood was just right. ✊
@@edwinladshow5791 sweet thank you buddy. Yeah it was messed up for a few days. Sorry I didnt do a very good job of relaying that to everyone. Glad you are here and I appreciate it. ✊
@@tazman-kennyfuller thank u it still gets it done it screams but omg an the hours that HAVE to be on that saw but it still turns rpms thru the frame EVER time I squeeze the trigger.
Thank u sir thank you very much for the shout out I always watch comment and like all ur videos.love the content and ur alot like another one of my brothers a solid cool man to know an u also gave him a shout out Chris LIGGETT!!!!! THE TREE FELLA!!!! HES A GOOD GUY TO KNOW AS WELL. Thank you both for all you do. Have a great day.
Thank you Justin for being here and watchin. You are very welcome brother. The tree fella always has something goin on and I love it. Such a cool old soul and I really hope to meet some of our community face to face some day. 🌲❤🌲✊
@@tazman-kennyfuller Chris is awessome! We gotta get tpgether!! All of us in the west/northwest especially cuz we are fairly close to each other! Need to figure out a Buckinstock in like McCall or Council!!!
Hey tazman .This video popped up in my suggestion bar I think I've heard your name on buckins channel so I subbed in . Looks like a fun day . Luv a 50cc saw light weight fun to run , my husky 450 is one of my favorite saws. Have a good day!!!
Thank you Pete for watching and subscribing I really do appreciate it. These saws are great to get out and run for sure the 350 is a dandy. I have never ran a 450 wood love to though. 🌲❤🌲✊🪓
Hey Tazman, Awesome to see you working with your daughter. Memories that will last a lifetime. Curious what size bar are you running on the 026. “Insert edit here, as I hit send you said in the video it was 20 inch bar, skip tooth @8:06” Stay safe. Be kind everyone
Thanks Rugged Yeah I run a 20 or a 24. I used to thin trees and used a 24 with a skip tooth for that. Someday I will switch it to .325 and see if it pulls it better on the 24 inch bar. 🌲❤🌲✊🪓
Hey Tazman how you doing. Yess the smaller saw have there place in the wood to! Husky sounds much better than the stihl, but i would say that cuz I’m a husky guy 😉. Stay safe Tazman especially Charlie. Take care.
You need a Peavy with a foot. The foot will get logs off the ground so you can cut them.. my 026 has an 18 inch .325 bar full comp on it and not a 20 inch bar. It has better balance with an 18 inch bar. Most 350’s that I have seen also are fitted with 18 inch bars. I go more for balance than bar length. If I need a bigger bar, I grab a bigger saw.the smallest saw that I will put a 20 inch bar on is 55 cc’s. I consider my 026 as a general purpose limbing saw or one for 12 inch or so diameter stuff. I do not use it to buck up real big stuff, although it will. I just am not going to ask it to buck up 16-18 inch stuff as a regular diet.
Thank you John. These saws sure are nice to grab every once in a while and get them out for a run. The 26 is just rebuilt in this video and needed some break in time. Just having fun. 🌲❤🌲✊🪓
@@tazman-kennyfuller mine in a ‘98 version that I am updating to 026 Pro specs. It was a crash damage saw that I picked up for a song. It already has a ms 260 rear handle and a bunch of other new stuff I am replacing some stuff out of an abundance of caution, seals, boot, oil lines, etc. it runs great now. The cylinder had a few scratches and I may replace it with a Hiway Titanickle cylinder.
I buy only 026, even it is used its still better than brand new ms or echo etc. I dont know why, but since my childhood ive used 026, and i will use it till parts will be avaliable
Dude likes the 350 for sure.
I have a Jonsered 2150 in a box in the garage. I gotta get that thing back together! Thanks for sharing be safe out there.
Hey hey 906 great to see ya thank you for checkin it out. Those smaller saws are sure fun to run in their type of wood, nice and light. Appreciate you being here. 🌲❤🌲✊
Wasn't this a great day...lovely woods, good weather, help, 2 great running machines,
Thank you Nicky oh man that was a great day for sure. 🌲❤🌲✊🪓
No better way to enjoy a day. Be safe and be careful.
Great video! Love watching axes and saw in use. Been trolling the old logging footage from the 30’s and 40’s. That two man you are right! Tree Fella and 307 knocked it outta the park with that footage! I smiled all day on that one! We all walk together brother! Great content! Keep em coming!
Thank you Casterman glad you enjoyed the footage. Definitely more on the way. Thanks for watching and commenting. 🌲❤🌲✊
TazMan-Kenny Fuller I could cut or watch wood being cut all the time. It’s hypnotic
@@casterman2 I am the same way buddy. Just something about saws that keeps us alive.✊
Good show Tazman. Two nice saws you got there.
Nice to see the 026 out in the woods again. Looks to be running & cutting well there for you. The Stihl 026’s are still my favourite saws. I’ve not used many other saws, so I don’t have much to compare it to. Still building up my 026 collection & working on a couple of re-build projects with the 026’s that will keep me going for a while.
That 350 sounds nice & looks like it was cutting really well too. I could hear a whistling sound coming from the 350, like a turbo whistling noise. Sounds awesome. Maybe I’ll look out for a 350 one day & give it a go.
Nice channel Tazman, I’m enjoying your videos and it’s great to see you running the 026. It is obviously a saw that I have a good connection with & appreciate & value also.
Stay cool dude. Respect ✊🏼
Hello Jake. The whistling sound comes from the air intake. Alot of husky saws make the same sound especially the higher rpm saws. Thank you for your support. 🌲❤🌲✊🪓
That three fifty is a ripper brother. Ya. Great video buddy. ❤️🌲❤️🌲❤️🌲
"ПРИВЕТ" from Russia. I use ms260. Like it. Like its sound. Good machine...
Thank you so much for subscribing and watching. Wow Welcome thank you. 🌲❤🌲✊🪓
@@tazman-kennyfuller Where are u from? What state?
@@Igor_the_Uncle I live in Northerstern Washington State. About 75 miles from the Canadian border.
@@tazman-kennyfuller Very close to Canada. I live and work very close to China, Korea and Japan also. Russian Far Eastern "TAIGA". Glad to meet ya here!
@@Igor_the_Uncle wow that's awesome. So glad to have you here. 🌲❤🌲✊🪓
Its so nice to See you and Charly working togther.i think the husky cuts better😁👍
Take care and stay safe out there!
Thank you Brother. I love getting to spend time getting fresh air with my kids no doubt. They are pretty darn good help. I appreciate you brother. 🌲❤🌲👍
My 026 came with a 19 inch bar with a .325, .050, 74 chain on it. I had a 18 inch, .325, .05, 68 Oregon bar on it for a while but like the slightly longer bar, both full comp.
Thank you John. I love the 026. I have never run .325 on my 26. When I bought it new I had a 24 inch skip tooth on it for slashing and it worked great. 🌲❤🌲✊🪓
My crash damaged 026 had an 19 inch bar marked .325, .050,74, which is a 20 inch chain. I sanded the bar down and repainted it and put its .325chain on it. Be careful changing the rim sprocket. It takes a big one, which I had a hard time finding. I have several extra 3/8 rim sprockets for my big saws but they were much to small to fit the .026. The .325ought to be a better chain for the 026 than the 3/8. I know it balances out better with its 19 inch bar than it did with a solid 20 inch bar.
Great saws and video! My 026 is starting to grow on me a little. Still dont like the switch but for smaller stuff its a nice break from the 395s weight. I can see it getting used a lot around the mill. STAY SAFE Brother and thanks for the shout out!!!
Yeah brother that 26 is a handy saw to have around. No doubt. Hope all is well buddy. 🌲❤🌲✊
@@tazman-kennyfuller everythings goin good here!! Gettn ready for a big road trip in 10 days. Was sposed to be Buckinstock but instead its just a vacation. Gonna be some good surprises on the channel i hope!
@@307j.o.a.t9 oh man I cant wait to see what your road trip brings. So cool that you are able to do this. Thanks brother i love ya man.✊
@@tazman-kennyfuller its really cool. Ive never been able to do these kinds of trips before. Thanks to my job im able to do it. Not the best job but it allows me do do this stuff.
Great little saws
Thank you for watching Ed gotta get the smaller ones out every once in a while. They usually dont go to the woods but that day the wood was just right. ✊
@@tazman-kennyfuller 💪👍👍 i subcribed to you second channel and was not seeing this.just sub to this one few hour before.finaly got you content back eh
@@edwinladshow5791 sweet thank you buddy. Yeah it was messed up for a few days. Sorry I didnt do a very good job of relaying that to everyone. Glad you are here and I appreciate it. ✊
@@tazman-kennyfuller No problem buddy.💪💪✌️❤️🌲🌴🌳🪓
Good morning brother and love the Stihl 026 I got 1 I'm still usen some but it's going to be really done hopefully soon
Hey brother good morning to you also. Glad to hear about your 026 hope you get it rippin soon. ✊
@@tazman-kennyfuller thank u it still gets it done it screams but omg an the hours that HAVE to be on that saw but it still turns rpms thru the frame EVER time I squeeze the trigger.
@@justinweaver8787 yeah buddy they are little rippers for sure. ✊
i’m lovin it
Thank you Lukas ✊
Thank u sir thank you very much for the shout out I always watch comment and like all ur videos.love the content and ur alot like another one of my brothers a solid cool man to know an u also gave him a shout out Chris LIGGETT!!!!! THE TREE FELLA!!!! HES A GOOD GUY TO KNOW AS WELL. Thank you both for all you do. Have a great day.
Thank you Justin for being here and watchin. You are very welcome brother. The tree fella always has something goin on and I love it. Such a cool old soul and I really hope to meet some of our community face to face some day. 🌲❤🌲✊
@@tazman-kennyfuller possibly never can tell brother hope so an hope everything is going good for you and your family.
@@justinweaver8787 everything is great here brother hope the same for you and yours. Thank you✊
@@tazman-kennyfuller Chris is awessome! We gotta get tpgether!! All of us in the west/northwest especially cuz we are fairly close to each other! Need to figure out a Buckinstock in like McCall or Council!!!
@@307j.o.a.t9 that would be awesome. Wow wouldn't that be fun just sittin around campfires and running saws and just hangin out.✊
Hey tazman .This video popped up in my suggestion bar I think I've heard your name on buckins channel so I subbed in . Looks like a fun day . Luv a 50cc saw light weight fun to run , my husky 450 is one of my favorite saws. Have a good day!!!
Thank you Pete for watching and subscribing I really do appreciate it. These saws are great to get out and run for sure the 350 is a dandy. I have never ran a 450 wood love to though. 🌲❤🌲✊🪓
Good day Taz, enjoy life in the woods brother. Keep them videos coming good see you.
Hey man thank you for checkin it out. Just havin fun cuttin some firewood. Glad your here. Thank you for commenting. Glad your here.🌲❤🌲✊
Hey Tazman,
Awesome to see you working with your daughter. Memories that will last a lifetime.
Curious what size bar are you running on the 026. “Insert edit here, as I hit send you said in the video it was 20 inch bar, skip tooth @8:06”
Stay safe. Be kind everyone
Thanks Rugged Yeah I run a 20 or a 24. I used to thin trees and used a 24 with a skip tooth for that. Someday I will switch it to .325 and see if it pulls it better on the 24 inch bar. 🌲❤🌲✊🪓
Hey buddy! That 026 is jamming. Are you running a square ground chain on it?
Hey Tazman how you doing. Yess the smaller saw have there place in the wood to! Husky sounds much better than the stihl, but i would say that cuz I’m a husky guy 😉. Stay safe Tazman especially Charlie. Take care.
Thank you Robert. That little Husky rips. I'm thinking about putting a 24 inch bar with the 325 pitch chain on it. ✊
You need a Peavy with a foot. The foot will get logs off the ground so you can cut them.. my 026 has an 18 inch .325 bar full comp on it and not a 20 inch bar. It has better balance with an 18 inch bar. Most 350’s that I have seen also are fitted with 18 inch bars. I go more for balance than bar length. If I need a bigger bar, I grab a bigger saw.the smallest saw that I will put a 20 inch bar on is 55 cc’s. I consider my 026 as a general purpose limbing saw or one for 12 inch or so diameter stuff. I do not use it to buck up real big stuff, although it will. I just am not going to ask it to buck up 16-18 inch stuff as a regular diet.
Thank you John. These saws sure are nice to grab every once in a while and get them out for a run. The 26 is just rebuilt in this video and needed some break in time. Just having fun. 🌲❤🌲✊🪓
@@tazman-kennyfuller mine in a ‘98 version that I am updating to 026 Pro specs. It was a crash damage saw that I picked up for a song. It already has a ms 260 rear handle and a bunch of other new stuff I am replacing some stuff out of an abundance of caution, seals, boot, oil lines, etc. it runs great now. The cylinder had a few scratches and I may replace it with a Hiway Titanickle cylinder.
Thanks TazMan ❤️
Thank you Brendan for your support. 🌲❤🌲✊🪓
I buy only 026, even it is used its still better than brand new ms or echo etc. I dont know why, but since my childhood ive used 026, and i will use it till parts will be avaliable
Thank you Bart for checkin it out. I used my 026 for thinning trees and loved it. They are a very nice saw to handle and run all day. 🌲❤🌲✊