I've rebuilt maybe 75 engines over the years, and one thing I always do is Plasticgauge the main, and rod bearings before I close it up. I've had so many machine shops screw up my cranks, and cylinder specs for new pistons. And I used a couple top race engine building shops all over the country, and they still screw up things. I don't trust anybody's machining work these days.
Very good and very informative. I absolutely love all the tech Tips on all your videos. I always learn something on every video you post. Thank you Calas. Aka Sea-Doo Master!
You make the most informative videos, as a technician my self it’s awesome!! I wish our Canadian dollar wasn’t so low in value I would love to buy our camshaft and your other parts
I am building a 2011 RXT 260. I am using the same Wiseco Pistons. Do you have any recommendations for ring end gaps size or should I say Tolerance.? Or should I go by manufacturer tolerances? Your input would be greatly appreciated.. I've learned a lot from you in this present build, and I'm doing. Thank you again, and i look forward to your response. Keep up the good work.
Appreciate the knowledge. I know it takes a lot just to do the work. But to do the work and make the films plus everything else takes way more. So thank you for this!
Hello, please tell me, I bought the block head, apparently it was overheated, as you said, the shaft on the last neck bites a little, what is your opinion, will it work? Thanks
Hola Ernesto, tengo dos rxpx 300 uno es 2022 y el otro 2023, tienen muy pocaas horas de uso, menos de 15 cada uno, pero no llegan sin cerca a la velocidad que dicen en internet, como vivo en colombia no les he podido hacer el reset del aciete, pero a las 10 horas se los cambie, sera que la falta del oil reset los esta afectando en la velocidad final,,, gracias
hello i have a 2002 gtx 4tec limited ran great. then one day i put the key to the post and i got one long beep. checked the fuse box and found 5amp fuse bad. replaced it but as soon as i put the key to the post it pops and i get one long beep. any info you have about this problem would be great. thanks
I just bought my first jetski (seadoo gti 130) and I love watching your videos.
Glad to hear that your business and RUclips Channel is growing. You do a great job of showing how to do these things with Sea-Doo's
As always Great video ! I wish that was my motor 👍🏼 greetings from Austin Texas 🇨🇱 Sea Doo Life 😊
11:36 love the glovebox cover cut and drawn on to look like “The Mask” on the wall lol
I've rebuilt maybe 75 engines over the years, and one thing I always do is Plasticgauge the main, and rod bearings before I close it up. I've had so many machine shops screw up my cranks, and cylinder specs for new pistons. And I used a couple top race engine building shops all over the country, and they still screw up things. I don't trust anybody's machining work these days.
Very good and very informative. I absolutely love all the tech Tips on all your videos. I always learn something on every video you post. Thank you Calas. Aka Sea-Doo Master!
I can watch engine build videos all day. Great job and explaining it very clearly. Love the channel. ❤
There is a lot of good detailed info in this video! Keep up the good work, my friend!
You make the most informative videos, as a technician my self it’s awesome!!
I wish our Canadian dollar wasn’t so low in value I would love to buy our camshaft and your other parts
Ernesto love your channel thankyou for sharing with us
faaaa master class !! grande ernesto !!
Love the content. And as always, it is very informative. Keep the videos coming.
The light💪🏻
The Master at seadoo engine builds.............................................................................Fort Worth,Tx
Please make a video on how to install a cam, and springs with the motor in from start to finish
🤩🤩thanks for all you great work,happy for you channel and business doing great 😊. Any yamaha re-build in the future.
?
Absolutely as the channel grows, we are going to do different projects
Outstanding video...appreciate your dedication to teaching and passing along your tips and trucks. It is much appreciated my friend!!!
I am building a 2011 RXT 260. I am using the same Wiseco Pistons. Do you have any recommendations
for ring end gaps size or should I say Tolerance.? Or should I go by manufacturer tolerances? Your input would be greatly appreciated.. I've learned a lot from you in this present build, and I'm doing. Thank you again, and i look forward to your response. Keep up the good work.
Appreciate the knowledge. I know it takes a lot just to do the work. But to do the work and make the films plus everything else takes way more. So thank you for this!
Another fantastic video Thank You
Tremendo contenido siempre!! 🎉🎉🎉
Thanks Ernesto as always, love your videos
OK. All nice looking BUT what about a NikaSil surface ? It is all gone ,,, so this engine will work but for how long ???
Thank you for this 👍🏻👍🏻
Super odcinek
The best !!!
What is the part number for those Wiseco pistons? Are they 100mm that are for the 1503 engines and 8.4:1?
Thank you for all your video's. Really do appreciate it. Where do you get all your arp bolt stuff from?any info would be great thank you
I have everything in stock
I will be putting ARP and more new products in calasperformance soon
Gracias por tus videos me encantan mucho 🙏💪💪💪
Good video enjoyed it thank you I’m not a Sea-Doo guy. I’m a Yamaha guy, but I still enjoy the video.
@@texasrider5621 patience, my friend I will be making a lot more Yamaha Contin
Thank you sir !
Hello, please tell me, I bought the block head, apparently it was overheated, as you said, the shaft on the last neck bites a little, what is your opinion, will it work? Thanks
It’s funny you ask that my first Seadoo 07 Rxp was like that and it ran 93 mph back on 2013 you’ll be fine
how much oil do you put into the engine? after doing the engine swap?
Where do you order all the parts for seadoo’s
nice video! do i need new springs and retainers for the cam?
Oh YES. DEFINITELY
For calascam yes I highly recommend it
what's your opinion Ernesto? Bolts that come in carrillo rods or install arp bolts in the rods
The Carrillo rods bolts of really good I will not change them
Hola Ernesto, tengo dos rxpx 300 uno es 2022 y el otro 2023, tienen muy pocaas horas de uso, menos de 15 cada uno, pero no llegan sin cerca a la velocidad que dicen en internet, como vivo en colombia no les he podido hacer el reset del aciete, pero a las 10 horas se los cambie, sera que la falta del oil reset los esta afectando en la velocidad final,,, gracias
Merci!
17:32 people will still try to argue that timing is “retard”. Thanks for pointing that out to people!
Also do you have a website where we can contact you for work?
Links are in the description.
Contact me at Calasperformance@gmail.com
Also links are in the description.
hello i have a 2002 gtx 4tec limited ran great. then one day i put the key to the post and i got one long beep. checked the fuse box and found 5amp fuse bad. replaced it but as soon as i put the key to the post it pops and i get one long beep. any info you have about this problem would be great. thanks
Go on GreenHaulk website www.greenhulk.net/ and I’m sure they have an answer for you in the forums
Do the wisco pistions effect the the balance
But, while the GTX Limited stand with its luxury features and accessories , the RXT - X is designed for performance .
Did you check piston ring gap? You didn't touch on it at all. If the pistons are new those rings need to be gapped for turbo, non turbo etc...
Any spare engines Ernesto?
Never there’s always a new project that is an engine🤦♂️🤣😂
@@calasworld hahah Yeaa I bet. I enjoy every single project you be putting out there. 🫶🏻
Do you know what is factory torque on head bolts using oem bolts?
It looks almost identical to building a SeaDoo 1503 engine
Niceeeeee!!!
Avez vous un mail ? Je voudrait vous contacté. Merci
The camshaft does have bearings; they are called plain bearings.
Vous pouvez mettre les sous titres en français s'il vous plaît ? Merci
How can I contact you for a quote
Valve cover bolts = 140 ft pounds lol not this guy
Noo. Lmfaoooo
🤦♂️