Faulty MJX X601H Gearbest DOA
HTML-код
- Опубликовано: 6 ноя 2024
- MJX Hexacopter from Gearbest was DOA. I noticed package had been previously opened. ??
TX will bind with Model but it will not control model. I tested the TX with a MJX X600 and the TX was proven OK.
New unit arrived from Gearbest. I had to pay the shipping and partial cost as I did not send original back.
The new model works as expected. It binds easily with the TX just turn on TX and RX. Press red button and props start.
I have flown it around the kitchen a few times and the baro hold works very effectively.
I will pull down the broken one and see if anything is obviously wrong.
Up on top left of transmitter, just push the RED button to start the props. Also, this model has emergency shut off when it lands, otherwise the props will keep turning or trying to turn, and could burn up a motor. So to stop props, both throttles go down and Out to stop props.
+Sean Brooks Thanks for the advice Sean but that does not start the motors either. Also the lights Off / On switch will not operate the lights either.
I connected it to the iPhone app control program and it will operate the lights and will start then motors but they only start to spin for about 500msec then stop.
I think the FC is busted.
Gearbest are sending me another one but I have to pay the postage. I thought that was fair.
I will update this when it arrives. I will swap the TX and the Model between them and determine if its the TX or Model.
Then I'll pull the faulty unit apart and see if its a simple wiring issue or something more complex. Hopefully parts will become available soon.
Cheers
Hello. Have X601h.
Mine works After pushing uoward/downward (left control) up than down to calibrate it.
I eventually found the issue. I bought a new flight controller from linparts and opened it up to replace the FC and found that one of the cables to the FC was not connected when it was built. I connected the cable and it worked fine.
Cheers
have you tried messing with the mode settings cause i had the same issue and once i got the mode selected right it worked fine
+Jessica Daniels I will give that a try. I set it to mode 1 it was mode 2 default.
Cheers
I got one of these it worked when I got it but now it fails to engine start with controller or wifi
I have exactly the same problem. If I push the throttle up and down after turning on the drone, it never stop flashing the led. Any idea how to solve the problem?
Hi, sorry for my English. I can not start my copter. I can only start in using RED button (autostart). But when I try to start motors with controller - nothing happens. Can you help me?
+ChinaGoods TV but with mobile app I can control the copter. I had bought MJX 601H also on GearBest.
+ChinaGoods TV That is the same was mine but the motors will not keep spinning using the AP. They just give a flicker.
Also When TX bound to model it will not operate the lights off / on. It ignores all the switch inputs.
That's good it's designed. They are all like that. The manual is incorrect. That is literally how you start it.
I think you should
read the manual first
+Black J Can you explain? Of course I read the manual.
+Marten van Kammen Visser I have exactly the same problem. If I push the throttle up and down after turning on the drone, it never stop flashing the led. The only way to turn motor on is via wifi. Any idea how to solve the problem?
+Marten van Kammen Visser As you can see from the video. It has bound with the model and the light is steady.
Just wont control the model.
can i use my old mjx x600 batry?
+Charles Way Yes