The CVT transmission is killing it guys. No power to the ground and unable to burn rubber. Lower the gear ratio and tighten up that belt so you can get some mad skids.
I agree, that clutch setup is jacked. Good clutching and maybe a little more exhaust and fuel tuning and that engine would blow the tires off that cart at any given time. Also wheelies :)
that is an old idea. Ine guy in germany has build a smart with 407hp with a hyabusa turbo engine. that smart doing wheelies. must look at bosmartjw smart vs. lamborghini . and yes it is fast than the lambo.
He welded the front suspension on crooked. That's why there is alignment issues. You can see how bad at 13:00. The bumper was straight before he did it. That's also why the light bar isn't straight.
extra air will just blow thru open both exhaust and intake port, on high rpm it sure will ad something, but it need custom expansion chambers, not one but 3, and they need to be tune to when boost kick and create that rezonation back pressure and push all that goodnes back to the cylinder
please slam it and put some pvc rings (basically huge pvc pipes for aquariums) around the tires and add a little water sprayer with the new pump to cool the pvc so you guys can drift it.
I knew a young lad that JPS did his car in the same Livery and paid for the respray on the agreement he kept it for 1 year 10 years later it was a daily driver and it was still perfect and he drove the car hard and there were no protective films to look after the paint. Apparently the paint job JPS had done was the better than on a new car.
"Since the engine* is connected to the traveling arms of the suspension isn't the exhaust going to be pushed into the frame once you hit a bump???? I see bent/broken exhaust parts in my Chrystal ball." I posted that two weeks ago on the episode where they put the exhaust on and it broke in half at the event XD
If anyone is curious, when they talk about have more back pressure, it's not about making it more restrictive. What they mean is that they are improving the velocity of the exhaust gasses by making the pipe smaller. So it's a balance between allowing a certain volume while maintaining proper velocity for exhaust savaging. Which actually reduces back pressure. For anyone curious on the physics behind it google Venturi effect or Bernoulli's principle.
Now it needs the appropriate bodykit to match the stance you could try using a bunch of old golf clubs welded together to make a sketchy-ass bumper and side skirt, or something else similarly ridiculous
As a red flannel blooded Canadian I think a snowmobile mechanic should be consulted on this one to extract its full potential. Sounds like its running better but just like on snow the CVT clutching is the key with these things. Its a game changer when you get it right. The single piped ultra 680 engine makes 115hp or so. but add a set of tripple pipes to it and you get 145hp. Theres potential here guys. Chairslayer must have some alberta hookups to help out. If not, I might be able to point you in the right direction. Cheers.
Shout out to Bad Daddy Braddy, he the real MVP, that cart is hella fly man thats some awesome custom fab work no matter what. Thanks Brad, you are appreciated
FOOT STEP! FOOT STEP! FOOT STEP!... Can load up with more passengers, can also hang off the side with a Tommy Gun. Only needs to be the width of your foot and the length between wheels. LETS GO BRAD.
As a man who's forgotten more about golf cars than most people would ever even want to know, I absolutely love watching car guys get flummoxed by such simple machinery. Know you're not the only one Brad, just look around RUclips.
I'm watching this Cleetus golf cart build off so youtube recommends me this gem where you guys built a golf cart swap a year ago and even called Cleetus out with leeroy @21:47. Little did you know a year later he would have his own golf cart swap to compete with
how do the plugs/piston wash look? also what jets (main & secondarys) are you currently running? what needle position? lastly what outside temps and elevation are you generally going to be running it at? Also important.. did the engine come from an ultra, or a storm that had an ultra hood swapped on it? ultra - 680cc, but ya'll been calling it a 750 which would have been a storm engine. I can give you a good base line to start from on the jetting, but all variables are needed. easiest way to figure out if its really a 750 or 680, cylinder cast number.
A fellow shredder! that engines not a mono block which rules out the 580/600 xlt based engines. Heads look like 680 heads to me which would be correct for the chassis they removed it from in their other video, but they seem to be dead set on calling it a 750 for some reason. But, without knowing what their running currently, what conditions they have down there that it will be run in and how the plug readings and piston wash look it will be hard to give them a base line for jetting to start with.
I thought of the clutch settings, it does't sounds like it's hit the high end rev's as it should. I hope someone with some English knowledge could tell them how to do. Because I'm from Sweden 😂
I had to go find the first video. It is an ultra ah? I agree with the clutching too. It just not right yet. I think it needs a little back pressure. More then just reducing down to one inch tip
Man, those 2 are an inspiration. slowly building up my tool game to start doing my own custom fab-ing like this. Dope stuff fellas. John, Awesome "livery". Classy my man, classy!
BoostAddict You are correct, 71 series need the blowers to feed air, tho slightly pressurised- it's in fact NA but twin charged versions are not NA. a blower- and building an exhaust system with enough back pressure would be easier than a turbo. Look up speedwerx, for a example of SC snow engines.
I think Brad needs to start helping Scotto fix some of his cars. Scotto when are you gonna have cars that run? Get the Audi firing up! Brad fixing up all sorts while scotto's cars aren't even touched!
Tyler Abell poor power delivery through a shit transmission. This thing would have been sick with street bike engine and a manual transmission. I'd set up the shifter upright, one forward five back. Would have no problem doing what they actually wanted it to do.
Reece Nunes If you didn’t know cvt transmissions are very efficient when tuned properly. With different springs in the primary and the right belt deflection and tensions that thing will shred. I’ve ridden sleds forever and those old 750 triples will keep up with new sleds when tuned right
Patrick Gaudreau they are great for a sled that's why they use them, this I'm sure gets up and moves too, but they don't have a large area to open it up. For this application, something to just blow donuts and do skids in their small parking lot, the setup I said would be much better. It needs to be way more snappy to be fun in a small area like that.
ive always wanted to do this using polaris drive trans also that way you have reverse and a 4 wheeler front end just seems like automatic disc brakes etc..
I need to know who is responsible for instrumentals! You guys play the COLDEST instrumentals. And I'm so happy Hoonigans put this guy to work! He is amazing. Only thing better than him is his vocabulary 😄
So everyone's just not gonna comment on Kyle's mustache?
MURK, Ned Flanders!!!
Kyle wins with the PORNSTACHE 😂😂
I mustache’ve missed it 👨🏻
Well it looked proper...
MURK add a turbo
The CVT transmission is killing it guys. No power to the ground and unable to burn rubber. Lower the gear ratio and tighten up that belt so you can get some mad skids.
I agree, that clutch setup is jacked. Good clutching and maybe a little more exhaust and fuel tuning and that engine would blow the tires off that cart at any given time. Also wheelies :)
Josh it's funny how this is pinned, but only one like...and now one reply lol
Needs a clutch kit. Changes engagement
Also that belt is very loose.
It would’ve worked a lot better with a jack shaft to a chain driven rear axle
Brad was getting progressively younger throughout this video.
It's the Bad Daddy Caddy and everyone knows it.
Ben Miosi I called it the Daddy Caddy weeks ago
Rename it to that^
Gavin Powell well aren't you cool. Hundreds of people called it that.
Ben Miosi u called it bro
Wanna put a wing on it?
You guys have to mount a rear Hydro E brake. Even if you have to make it an axle brake you have to do it.
I say you put a hyabusa motor in the smart car next
that is an old idea. Ine guy in germany has build a smart with 407hp with a hyabusa turbo engine.
that smart doing wheelies. must look at bosmartjw smart vs. lamborghini . and yes it is fast than the lambo.
Subaru Boxer Engine
It may have been done, but still a good time. Its like just cause youve had sex doesnt make it old news and something you wouldnt do again😂
Dude screw that do a 2jz motor
Why not LS swap it?
So, would you drive the Hoonigan Sketchy Special?
Hell to the fuck yes.
Preferably with Kikawa holding on to dear life.
Hoonigan Bonus try using go kart tires
hell yeah
Need to add a 95 VW JETTA external water pump and high output cooling fan
Like askin...
Do u smell ur own farts..?
Fuck Yeah!
The Country Club must’ve loved you guys lol
the greens will never recover
He welded the front suspension on crooked. That's why there is alignment issues. You can see how bad at 13:00. The bumper was straight before he did it. That's also why the light bar isn't straight.
Its a hoopty of a cart built from junk/scrap thats going to be trashed no matter how good they build it.
Josh Crutchley wow, that is really crooked.
they definitely gotta fix that.
meth head
carlover lmao I thought the same thing😂😂
is no one going to comment on how good Big Daddy is on camera? Him and Dan are seriously the best duo. Love their segments together.
welcome to pimp my golfcart
definitely turbo if y'all can make that happen
2 stroke turbo will not work very well
my b.. you mind throwin down some basics so i can figure out why?
is there a feasible form of forced induction?
extra air will just blow thru open both exhaust and intake port, on high rpm it sure will ad something, but it need custom expansion chambers, not one but 3, and they need to be tune to when boost kick and create that rezonation back pressure and push all that goodnes back to the cylinder
nitrous it is then
Fix shit car or the bug. What ever happened to Scotto and his wife building all the non working cars???
Yeah what this guy said. we need shtcar back
neil busante or scotto and wife working on their car
Why not both?
Shitcar is the next car on garage garage
I'd love to see the bug with a real motor like what I got (2276 FI). It would be epic fun.
Hahaha kikawa looks so good on the golf cart 😂!!Now we need shit car back!!!!!❤
Can we all agree that this is the best golf cart build ever? The sketch level is to the roof and I love it.
You've gotta take that down to The Villages in Florida. Would love to see a video of it driving around the retirement village
Hand brake for the rear and some slippery tires for skidding!
please slam it and put some pvc rings (basically huge pvc pipes for aquariums) around the tires and add a little water sprayer with the new pump to cool the pvc so you guys can drift it.
Chang Lee they’ve already drifted the golf cart
do it handbrake for drifting
Wheelie bar! And a cooler, a golf cart must.
When a golf cart has wider tires than my Miata.
BayAreaMisfits subtle plug lol
JeremyK 541OR. Miatas are the shit I have owned 3 no shame in that at all
Needs a hydro and a welded diff if possible
SnoTheLeopard it's got a solid axle. No differential.
BoostAddict still needs the hidro tho
Need hydro 100000% agreed
It would be relatively impossible not to flip in that situation
Yeah let's just destroy the cart, what a good idea
Love the black and gold Lotus JPS style.
Formula 1Fan love the jps livery it's one of the best. Guy in aus used to race a bmw 635 with it on too.
Formula 1Fan to
I knew a young lad that JPS did his car in the same Livery and paid for the respray on the agreement he kept it for 1 year 10 years later it was a daily driver and it was still perfect and he drove the car hard and there were no protective films to look after the paint. Apparently the paint job JPS had done was the better than on a new car.
Looking forward to Monaco?
I think you should add gold under glow.
"Since the engine* is connected to the traveling arms of the suspension isn't the exhaust going to be pushed into the frame once you hit a bump???? I see bent/broken exhaust parts in my Chrystal ball." I posted that two weeks ago on the episode where they put the exhaust on and it broke in half at the event XD
If anyone is curious, when they talk about have more back pressure, it's not about making it more restrictive. What they mean is that they are improving the velocity of the exhaust gasses by making the pipe smaller. So it's a balance between allowing a certain volume while maintaining proper velocity for exhaust savaging. Which actually reduces back pressure.
For anyone curious on the physics behind it google Venturi effect or Bernoulli's principle.
Now it needs the appropriate bodykit to match the stance
you could try using a bunch of old golf clubs welded together to make a sketchy-ass bumper and side skirt, or something else similarly ridiculous
Holy shit on a shingle, this thing is a mini monster. It rips so good. Lovin GARAGE GARRRRAAAAAAAAGGGGEEEEEEE, guys.
Ready Player Hoon
Colin Hawley asssssssssaaaaaaaaassssshhhhhhooooolllllleeeeee
It needs to get proper gearbox if thats possible, cuz the shitty cvt is slow af, lol
omg you painted it, great job, going to scar them old people at the country club
Going back and watching brad do this kind of thing is excellent programming, lol.
As a red flannel blooded Canadian I think a snowmobile mechanic should be consulted on this one to extract its full potential. Sounds like its running better but just like on snow the CVT clutching is the key with these things. Its a game changer when you get it right. The single piped ultra 680 engine makes 115hp or so. but add a set of tripple pipes to it and you get 145hp. Theres potential here guys. Chairslayer must have some alberta hookups to help out. If not, I might be able to point you in the right direction. Cheers.
Shout out to Bad Daddy Braddy, he the real MVP, that cart is hella fly man thats some awesome custom fab work no matter what. Thanks Brad, you are appreciated
Could we get a Build Biology on the TWERKSTALLION 😜
that would just be a picture of a bucket filled with zip-ties and broken diff casings tho
I second that
He already broke it. Motor runs though.
FOOT STEP! FOOT STEP! FOOT STEP!... Can load up with more passengers, can also hang off the side with a Tommy Gun. Only needs to be the width of your foot and the length between wheels. LETS GO BRAD.
Great idea. Im telling ya.
"Cleeetus Mclaren" 😂😂😂
As a man who's forgotten more about golf cars than most people would ever even want to know, I absolutely love watching car guys get flummoxed by such simple machinery. Know you're not the only one Brad, just look around RUclips.
Put a Turbo in the *HOONIGAN PLAYER SPECIAL*
BTW that Thumbnail get me exited for the video lol
So cool that you guys based the livery on a livery from an old Lotus F1 car
turbo hayabusa golf cart
Livery reminds me of one of those old JPS formula cars
LVCHY_ Thats the point...... I mean it has the colors and pin stripe and the word SPECIAL in it
Alejandro Ochoa orly? i didnt know how inspiration works, thanks.
LVCHY_ Not sure what your reply means but ok
LVCHY_ thought the same, 5hink thats what they went for
Yeah strange that....
garage garage = best show out of all hoonigan new channel shows
John's beard flowing in the wind makes me feel some type of way
the sketch level in the opening clip is MENTAL
also you should make a digital camo jumper! pls and thx
So sick! Watched this whole build through, some exemplary bodging.
Love the HPS livery! My favourite racing team was always JPS, so this is just perfect!
locked diff.
I want to see a tire rack so it can be useful at the track
John Player would be oh so proud!
I'm watching this Cleetus golf cart build off so youtube recommends me this gem where you guys built a golf cart swap a year ago and even called Cleetus out with leeroy @21:47. Little did you know a year later he would have his own golf cart swap to compete with
Take it to Catalina Island and rip around the hills with it!!
SaguaroCharlez ruclips.net/video/aTJMiLPV4P8/видео.html
Leave it to Hoonigan to have me browsing craigslist for used golf carts.
SAME
there is one on there with airbags
You need a hydro
a hydro handbrake would fit the build well
itd flip
Elfonzo just testing the cage 🤷♂️
I need a picture of Brad on the roof while Dan does a burn out for my wallpaper at work!! This golf cart is nicer than my car!
Makes me so happy seeing Brad.
Do a lawnmower next
Dan The Man u mean a Honda right?
A push mover though not a riding mower. ;)
Andrew McGrath Honda makes both
TopDawg e
What about Honda? Does Honda make lawn mowers and lawn mower accessories?
It would have been cooler if you made a big hoonigan logo as a cooling hole.
It needs a widebody kit and some hella aggressive areo.
HASHTAG ANTI-MEME hell yeah a wide body kit for it and a wing would be lit
Yo, Brad absolutely ripped that pull cord out! He tries to wrap it up and hide it.. 😂 24:20
put golf gti badge on it
Golf GTH badge...
how do the plugs/piston wash look? also what jets (main & secondarys) are you currently running? what needle position? lastly what outside temps and elevation are you generally going to be running it at? Also important.. did the engine come from an ultra, or a storm that had an ultra hood swapped on it? ultra - 680cc, but ya'll been calling it a 750 which would have been a storm engine. I can give you a good base line to start from on the jetting, but all variables are needed. easiest way to figure out if its really a 750 or 680, cylinder cast number.
AKproXR you need to help them get that motor going good homie. Hahaha recognize you from ak snowshredder 2.0
They got that from an xlt dude. Like a 95 or 94. None xlt special rig
A fellow shredder! that engines not a mono block which rules out the 580/600 xlt based engines. Heads look like 680 heads to me which would be correct for the chassis they removed it from in their other video, but they seem to be dead set on calling it a 750 for some reason. But, without knowing what their running currently, what conditions they have down there that it will be run in and how the plug readings and piston wash look it will be hard to give them a base line for jetting to start with.
I thought of the clutch settings, it does't sounds like it's hit the high end rev's as it should.
I hope someone with some English knowledge could tell them how to do.
Because I'm from Sweden 😂
I had to go find the first video. It is an ultra ah? I agree with the clutching too. It just not right yet. I think it needs a little back pressure. More then just reducing down to one inch tip
Jon Chase is my favourite 😎👍🏼 man is just super cool
Pls build the Rolls-Royce next i wanna see it super stanced and clean
Man, those 2 are an inspiration. slowly building up my tool game to start doing my own custom fab-ing like this. Dope stuff fellas. John, Awesome "livery". Classy my man, classy!
This show made Tuesdays my favorite of the week
nos + turbo = BADASSS
2 stroke plus turbo = yes have you ever seen mountain sleds?
It would be more efficient to SC a 2 stroke: like old Detroit diesels
Alexander Helton Old Detroits may have superchargers but they're technically NA still.
BoostAddict You are correct, 71 series need the blowers to feed air, tho slightly pressurised- it's in fact NA
but twin charged versions are not NA.
a blower- and building an exhaust system with enough back pressure would be easier than a turbo. Look up speedwerx, for a example of SC snow engines.
No need for Nos or turbskis just slap a high compression head on that thing it’s a 2 stroke
I have a dying desire to see John without a beard haha
Me too after seeing Brad without his goatee.
Now it just needs that 3 wheel motion. Install some hydros and blow everybody's mind. lol
I think Brad needs to start helping Scotto fix some of his cars. Scotto when are you gonna have cars that run? Get the Audi firing up! Brad fixing up all sorts while scotto's cars aren't even touched!
Dominic Topping the dream!
Audi coupe next for sure!
Once again above and beyond what anyone would think😻
BadDaddyBraddy looks good with a haircut and a shave
hard to skid but you guys should grip race it at a go-kart track
Joe Sabella I’m sure they did at the golf course
U guys should wide body the cart!!!!
I love the play ON JOHN PLAYER SPECIAL IN THE OLD GOLD AND BLACK
You guys should make a hoonigan player special line of shirts because that livery is awesome
I feel like a cr500 engine would have been better.. that thing is bogging like my kids bike when I ride it lol
With some clutch tuning that thing could be a real handful
Lmao!
swafford501 single cylinder vs 3 cylinder on a 4 wheeler, guess whats better...
Max xr125 a single cylinder that doesn't bog
It's because they fucked up the pipe
watch as new sign at the golf course comes up: 'no hooning on the course' XD XD
I don’t know what’s wrong with it but it should be way faster those engines have over 120hp
Tyler Abell poor power delivery through a shit transmission. This thing would have been sick with street bike engine and a manual transmission. I'd set up the shifter upright, one forward five back. Would have no problem doing what they actually wanted it to do.
It’s also very heavy and has small wheels
I agree a bike engine would do great.
Reece Nunes If you didn’t know cvt transmissions are very efficient when tuned properly. With different springs in the primary and the right belt deflection and tensions that thing will shred. I’ve ridden sleds forever and those old 750 triples will keep up with new sleds when tuned right
Patrick Gaudreau they are great for a sled that's why they use them, this I'm sure gets up and moves too, but they don't have a large area to open it up. For this application, something to just blow donuts and do skids in their small parking lot, the setup I said would be much better. It needs to be way more snappy to be fun in a small area like that.
Ok off the golf cart, you guys need to build that Baja bug sitting in the background!!!!!
Kyle sick stash, on the other hand hydro E-brake and locker or welded rear are a must in the future if you want to live up to the hoonigan name !!
GARAGE GARAGAHHHHHHAHHHHHGE
Lol calling out Cleetus Mclarlen. I wanna see Bad Daddy Braddy dial in the hot rod and race Leroy
Best livery to copy imo
ive always wanted to do this using polaris drive trans also that way you have reverse and a 4 wheeler front end just seems like automatic disc brakes etc..
Love the John player special paint scheme!
I just kept saying to myself, " OMG THERES MORE?!"...
up next brad daddy needs to work on the orange bug.
shitcar is next
René Alcerro Shitcar will always be shitcar. It's fucking perfect.
Shit car is a broken, dirty, dusty POS right now. it needs love
Put handbreak on it
B3ST 0F B34ST brake
First window nets!
Ok
B3ST 0F B34ST hydro e
Brad must be so happy he got this job!
guys this project was sick!!!!!
it needs a MEATY WING
Dazamn thats clean
That light bar crooked asf tho lol
Twin turbo supercharge build
Phil W Vlogz “twin turbo supercharge”
Super Bright LED Light bar upfront “because golf cart” 😄
id be lying if i said the crooked light bar doesnt bother me. sick job baddaddybrad!!!!
Gymkhana 11: Golf-khana
KEWL. SUCKS building more than 1 carburetor. Tuning is nightmare. Keep on killing it.
they just need to be balanced it takes like 20 min
Yea boy
I need to know who is responsible for instrumentals! You guys play the COLDEST instrumentals. And I'm so happy Hoonigans put this guy to work! He is amazing. Only thing better than him is his vocabulary 😄
The old Mark Kinser paint job lol awesome