hey guys I clean the inside of my connector with a toothpick and wrap some Brillo pad around a toothpick and just scratched the inside cleaned it out real good and just reconnect the connector and now my headlights works fine on my bike ! Fullysuited saved me some Bread. once Again thanks chief !
Great Video ... I still have my 2000 Gixxer 750 from brand new ...I replaced one of the pins inside the connector ... upgraded to HID lights All Gixxers have this issue ..5 STARS
Yo. Thanks so much for this video! My '92 gsxr 600 has the wires in the same place. I checked them and sure enough, black. I fixed it and you saved me some money.
Thanks for the video man, my '03 600 I just COPT over 4th of July has no headlights. Gonna check this out in the morning. Also, thanks for the schematics I'll be looking at that too... almost bought a whole new fucking headlight switch because of the issue. Glad I checked this issue out online before buying the damn switch.
I just bought a 02 GSXR1000 a couple weeks ago and was riding home the other night from work and my headlights just shut off going 50-60 mph down a dark back road in TN. Gonna check this out tomorrow, it has to be this tho cause the lights started burning once i got it home on the trailer lol. My luck!!
Yeah.just go through the connectors and check for anything that's black or burnt grey. If you see anything that looks like that, scrap the metal until it turns silver again!
I don’t have low beam Which wire should I check I have Continuity at the connector on the yellow wire the black white stripe and white wire at the connector Fuses and bulbs hood high beam works what could be the issue any help greatly appreciated
My speedometer not working rpm need does not move and won’t show me my speed mileage time but all light work including neutral light no oil light as well Speedo sensor works all fuses are good cluster is good all but one wire that is starting to heat up but it a head light wire which I have already fixed any ideas? I’m stuck at the moment
Questions? High beams work, low beams do not. Any ideas? Also bad fuse would not allow low or high beams to work? Replaced low beam bulb already. Any ideas would be appreciated. I have a 02 gsxr 1000 I just purchased. Thanks
Triumph Daytona same. In a rain storm I had it connected to battery tender power went out now lights don’t work. Brake and signal lights but not headlights. Changed fuses and bulbs but nothing. You think it’s the same?
these connetros have long been the gsxrs achilles, the R/R... yup, heat, a mosfet R/r will help with all this dramatically your charging and electrical runs way cooler no matter the load, unless its unrealistic load of course like a ground short or something an accessory drawing ay too much, mosfet will stop flicker, battery last longer, charges better, quicker..
Hey buddy - just found this video as I’m looking for help - had my bike for 4 months with no issues electrically, then yesterday while riding my dash went out / turn signals not working bike kept running - noticed my 10a fuse had blown - changed it and it blows again soon as I turn ignition on - I’ve tried to fault find the wires under the tank / under the ignition for example cannot see anything obvious like burnt wire - what do you think buddy?
My bike has 2 yellow 2 white 2 black and white I don’t know which wire goes on headlight location with a normal 3 prong headlight The other connector I have is Black /Green Black/white Black/yellow ???? Please help
Chris martin Take the side fairing off like I did and check and see if any of the connections have that burned corrosion from excessive heat. It will be a dark brown or black color
Hi I Have a problem With my rectifier and stater I bought my bike used and The guy I bought it from said I have to replace the stator And rectifier was buried wires I want to replace it didn't know what Wire went where
Helpful video! These are Sumitomo connectors. If the housing isn't melted and you're really picky about your repairs, you could just replace the bad pins. www.corsa-technic.com/category.php?category_id=51 Make sure you get the correct style for your connector. They also sell the complete replacement connectors.
@@fullysuited dude heck yeah, so I got a 2001 gsxr 600 , and the dude i got from said something got wet? Or something idk , he danced around it. Long story short. He ended up by passing the switch on the handlebar , and used 3rd party switch that he put on the fairing. Well when I went to plug in the light bulb today, the normal way, I found the handlebar switch wouldn't work(high beam/low beam) but the horn and both turn signals work on the switch? So idk what to do. Both factory connectors that would normally plug into the bulbs were cracked so I chopped them and ended up getting crimp on connectors. But I guess my question is what would make ONLY the head lights not work on the switch , while the turn signals work and horn.
That is funny you ask because as of now my blinkers work my tell lights work but my headlight in the digital screen does not work long story short I was talking to a mechanic in he thinks it's my Ignition switch since I have not changed mine out yet I don't know if that will work but because your description is similar to mine I think that is what you're dealing with
@@fullysuited hahha that's funny. But shitty at the same time lol. So the dude I got the bike from put led strips in becsuse the "bulbs kept breaking" so today I accidentally shorted out my dash trying to figure out how to hook them back up. But I changed a 15A fuse . And the screen came on. The light however for the lights , isnt working. Nor is the switch , nor the tail lights now. I'm so mad lol
I have a 02 gsxr 600, I checked all my connections weren’t burnt, I cleaned and lined all connectors, bought new bulbs. Still headlights not working. When I click to hi beam, doesn’t even show the blue light on odometer. If anyone can help. Please do lol. Thank you guys.
fullysuited ok so just found out from working on the bike. the black connector with the two orange loops, O/B & O/R. When I unplug my headlights, and jiggle the black connector to the right spot I get power to the headlights but after I connect the headlight connectors to the bulb, the power is no longer there. When I removed the headlight connectors the power is back. So maybe there is a wire that I have to splice and join together. Just don’t know which color, will be studying the wiring diagram a bit more though.
fullysuited yeah so I found out for sure it’s that black connector with the two looped orange wires. My next thing is trying to figure a long term fix, I was thinking just find which one is the main power for headlight & just join them together with a crimp. Or black tape it to the frame some how so it doesn’t move. What do you suggest ?
Hey there fullysuited, I've got my 2001 GSX-R600 headlight problem solved. Thanks to you and someone else who replied to this post. I posted a video showing my repair. Here's the video link... ruclips.net/video/fHAHiAe5PQE/видео.html
Bro that looks like some science
hey guys I clean the inside of my connector with a toothpick and wrap some Brillo pad around a toothpick and just scratched the inside cleaned it out real good and just reconnect the connector and now my headlights works fine on my bike ! Fullysuited saved me some Bread. once Again thanks chief !
Some electrical contact cleaner after scrubbing the port clean wouldn't hurt. A very good idea though, thanks.
Great info. This was my problem. Fixed it in minutes. Luxkily mine weren't burnt. I just had to spray them with contact cleaner. Thanks sooooo much!
Thank you, some good information to consider with my current headlights not working issue. I appreciate you doing your video.
Great Video ... I still have my 2000 Gixxer 750 from brand new ...I replaced one of the pins inside the connector ... upgraded to HID lights All Gixxers have this issue ..5 STARS
I really appreciate for your video after 12 hours trying to get this light fixed I finally got it. Thanks to your video posted
I'm so glad it help! And think about the Money you saved. Email me a picture of your bike at Fullysuited@gmail.com. I like to see my viewers bikes!
Good to see people sharing knowledge thanks
Yo. Thanks so much for this video! My '92 gsxr 600 has the wires in the same place. I checked them and sure enough, black. I fixed it and you saved me some money.
BlazeroToSixty Awesome!, Happy to be a blessing!
Send me a picture of your bike Fullysuited@gmail.com, love to see what you ride
fullysuited not a problem. It's sent
Thank you so much! My issue was on another connector but you help me a lot to find the issue
Thanks for the video that's exactly what was wrong with mine
For sure helped!! with mine good look's
Thanks for the video man, my '03 600 I just COPT over 4th of July has no headlights. Gonna check this out in the morning. Also, thanks for the schematics I'll be looking at that too... almost bought a whole new fucking headlight switch because of the issue. Glad I checked this issue out online before buying the damn switch.
Very informative. Thank you
I just keep jiggling mine... :) Good video I appreciate it
Well put !!!
Nice bro!!
Thank you for sharing this!!!
I’ll like to know where did you get the diagram of the wiring!??
It could get it online or buy it??
Question: Do you have any idea where the headlight wiring is located on a 2007 GSXR 1000 Limited edition?
Tanks buddy 👍👍👍
Thanks for the video brother. I’m about to try it.
My high beam works but not the low beam.
I am having the same problem, did this fix the issue?
I just bought a 02 GSXR1000 a couple weeks ago and was riding home the other night from work and my headlights just shut off going 50-60 mph down a dark back road in TN. Gonna check this out tomorrow, it has to be this tho cause the lights started burning once i got it home on the trailer lol. My luck!!
Yeah.just go through the connectors and check for anything that's black or burnt grey. If you see anything that looks like that, scrap the metal until it turns silver again!
I need some help with the turn signal cables for the 2001 gsxr 1k.
Can you make a video showing how 2 remove those wires from the connector I'm pretty much tearing up my connecting plug trying to get the wires out
I don’t have low beam
Which wire should I check I have Continuity at the connector on the yellow wire the black white stripe and white wire at the connector
Fuses and bulbs hood high beam works what could be the issue any help greatly appreciated
Just got to the point not a bunch of bs
Bravo.
Gracias
My speedometer not working rpm need does not move and won’t show me my speed mileage time but all light work including neutral light no oil light as well Speedo sensor works all fuses are good cluster is good all but one wire that is starting to heat up but it a head light wire which I have already fixed any ideas? I’m stuck at the moment
Questions? High beams work, low beams do not. Any ideas? Also bad fuse would not allow low or high beams to work? Replaced low beam bulb already. Any ideas would be appreciated. I have a 02 gsxr 1000 I just purchased. Thanks
Sounds like you need a new bulb I say that because the high-beam and low-beam are in the same bulb
I have the same problem with my honda cbr f2 ,I checked the fuses and the bulb ,both are good but my wires look dark around them any suggestions
I have the same problem, did you fix yours?I may have to splice them too cuz inside the connector is black
Triumph Daytona same. In a rain storm I had it connected to battery tender power went out now lights don’t work. Brake and signal lights but not headlights. Changed fuses and bulbs but nothing. You think it’s the same?
Yep
these connetros have long been the gsxrs achilles, the R/R... yup, heat, a mosfet R/r will help with all this dramatically your charging and electrical runs way cooler no matter the load, unless its unrealistic load of course like a ground short or something an accessory drawing ay too much, mosfet will stop flicker, battery last longer, charges better, quicker..
Hey buddy - just found this video as I’m looking for help - had my bike for 4 months with no issues electrically, then yesterday while riding my dash went out / turn signals not working bike kept running - noticed my 10a fuse had blown - changed it and it blows again soon as I turn ignition on - I’ve tried to fault find the wires under the tank / under the ignition for example cannot see anything obvious like burnt wire - what do you think buddy?
Sorry it’s a 2005 K5 GSXR
My bike has
2 yellow
2 white
2 black and white
I don’t know which wire goes on headlight location with a normal 3 prong headlight
The other connector I have is
Black /Green
Black/white
Black/yellow ????
Please help
Sup dude my 2006 r1 headlights n dash lights won't come on checked fuses are good u have any idea wats the problem?
Chris martin Take the side fairing off like I did and check and see if any of the connections have that burned corrosion from excessive heat. It will be a dark brown or black color
Check your connections.you may have some corrosion.
Mine when you flash the highbeams it won’t go back to low
Hi I Have a problem With my rectifier and stater I bought my bike used and The guy I bought it from said I have to replace the stator And rectifier was buried wires I want to replace it didn't know what Wire went where
Helpful video! These are Sumitomo connectors. If the housing isn't melted and you're really picky about your repairs, you could just replace the bad pins. www.corsa-technic.com/category.php?category_id=51 Make sure you get the correct style for your connector. They also sell the complete replacement connectors.
Why was that blue orange wire have a jumper to it
What happen if your head light is on an not coming off
Does this apply to 05 gsxr 600? Headlight stopped working and I see bulb filament is intact. Where should I start from?
XtremerJay Yes. check your fusses. From there disconnect the connections like I showed in the video.
Couldnt find the fuses, I guess 05 they are placed somewhere else. I'll try to take out the dash and check bulbs as well. Thanks
So my high beam turns on but my low beam does. Do they run on separate fuses
Mine same did you solve the plm ?
I disconnected look at it it's burned inside.
I got another connector it still didn't work
My low beam circuit has an open that isn’t in the connector. When I wiggle it around it works.... fuck
Ok so I have a 02 gsxr 600 and my high beam both headlights come on, but my low beams nothing comes on. And i just replaced the right bulb
Did you figure it out?
I have 02 GSXR 600 an my head lights took a shit on the way home 😅😅
I have this issue with my 07 hayabusa
My whole front end is not working. Bike starts and runs. Help please
If you dont see any burnt male or female connections then that means you have a short (aka grounded out) wire. At that point I would go to a shop.
What a book??
do u still have the bike. i need help
What seems to be the problem?
need to know what wires connect to each other... the yellow connector. bought a bike and the connector was broke. and I suck at reading schematics.
@@dalchemista2814 Take some pictures and email it to me. Help me, Help you.
@@fullysuited email??
@@dalchemista2814 geez, guess you didnt watch the whole video 🧐
Are you still responding to questions?
Sure, what's up
@@fullysuited dude heck yeah, so I got a 2001 gsxr 600 , and the dude i got from said something got wet? Or something idk , he danced around it. Long story short. He ended up by passing the switch on the handlebar , and used 3rd party switch that he put on the fairing. Well when I went to plug in the light bulb today, the normal way, I found the handlebar switch wouldn't work(high beam/low beam) but the horn and both turn signals work on the switch?
So idk what to do. Both factory connectors that would normally plug into the bulbs were cracked so I chopped them and ended up getting crimp on connectors. But I guess my question is what would make ONLY the head lights not work on the switch , while the turn signals work and horn.
That is funny you ask because as of now my blinkers work my tell lights work but my headlight in the digital screen does not work long story short I was talking to a mechanic in he thinks it's my Ignition switch since I have not changed mine out yet I don't know if that will work but because your description is similar to mine I think that is what you're dealing with
@@fullysuited hahha that's funny. But shitty at the same time lol.
So the dude I got the bike from put led strips in becsuse the "bulbs kept breaking" so today I accidentally shorted out my dash trying to figure out how to hook them back up. But I changed a 15A fuse . And the screen came on.
The light however for the lights , isnt working. Nor is the switch , nor the tail lights now. I'm so mad lol
If you don't have the book you are in over your head and now is a time I was say stop and take the bike to the shop
Bro u have instagram or ig
I have a 02 gsxr 600, I checked all my connections weren’t burnt, I cleaned and lined all connectors, bought new bulbs. Still headlights not working. When I click to hi beam, doesn’t even show the blue light on odometer. If anyone can help. Please do lol. Thank you guys.
Christopher Silletti At that point you are not getting power. Have you checked the fuses next to throttle ?
fullysuited ok so just found out from working on the bike. the black connector with the two orange loops, O/B & O/R. When I unplug my headlights, and jiggle the black connector to the right spot I get power to the headlights but after I connect the headlight connectors to the bulb, the power is no longer there. When I removed the headlight connectors the power is back. So maybe there is a wire that I have to splice and join together. Just don’t know which color, will be studying the wiring diagram a bit more though.
Yeah. It's always at the connection. I will add that info to my arsenal for other riders.
Make sure you use some light bulb grease in the future
fullysuited yeah so I found out for sure it’s that black connector with the two looped orange wires. My next thing is trying to figure a long term fix, I was thinking just find which one is the main power for headlight & just join them together with a crimp. Or black tape it to the frame some how so it doesn’t move. What do you suggest ?
Hey there fullysuited, I've got my 2001 GSX-R600 headlight problem solved. Thanks to you and someone else who replied to this post. I posted a video showing my repair. Here's the video link...
ruclips.net/video/fHAHiAe5PQE/видео.html