1: I thought you “laser beam” was hysterical. 2: what a great job. 3: you have some amazing equipment. 4: I’ll be buying one this fall. And 5: Jet is adorable!
Just pre-ordered mine! I've wanted to get a 3D printer for a while but don't have the space until we move. So excited to get rid of my current filtration setup!!!
Thank you Dilbert. You should totally get a 3d printer but you have to stick with it. It’s easy to get discouraged then your print will just be a heavy paper weight.
Revolutionary for the AIOs. Makes some for the Innovative Marine AIO. I cut some light diffuser to make a small rack for a filter pad. This would definitely same time and a little money on buying floss and cutting to size.
Definitely not in a place to teach, but suggest to maybe lay a piece of heavy cloth(jean/sweatshirt) over the teeth of the clamps to prevent possible indentation to the plastic. Love your work. Can't wait to get one when I'm ready.
just an idea to make the initial install of the paper roll easier. if you can have a Philips or square nut engraving on the rolling wheel so we can use electric power drill for much faster rolling
Ooh this is what I need for my waterbox, it's the Waterbox Marine 45.2 with 2 overflow combs on each side. So I'm guessing I would need one for each. Hope to see a bigger size available soon! Keep up the ingenuity and great work!
This is such a great idea, and keeping it simple with the hand crank instead of fussing with sensors and motors really works well for the small desktop aquariums! I'd love to have one on my IM Fusion 25 Lagoon tank! All the IM Fusion desktop tanks share the same filter chamber dimensions so it would be super simple to have one that fits them all! Eagerly awaiting the IM drop!
I’m with you Connor, I didn’t use a motor or sensor because I prefer reducing the total number of electronic used on the tank whenever possible. At some point everything fails and the more you have is increasing the possibility of failure.
I would be very interested in one that the first basket actually hangs from the side or back of the Waterbox 25 peninsula, removed the strip from inside of the chamber for a media basket. Also have a IM Nuvo 40 Gen 1 .
You the second or third person to say they removed the brackets inside the Waterbox. I could print you some new ones if you wanted to reinstall the pieces.
I do have a question for you. I bought my waterbox 20 used. And they cut out the filter sock holder to place a media holder. And I see your filter roller is held in place by that. Do you happen to know the dimensions of the small acrylic pieces that hold the sock in place? I’ll silicone them in myself.
@@rickymcnugget4635 I don’t know the exact size but my guess is that it is just a 4mm ledge on the front and back of the chamber. Anything small should work. Just don’t go to large or the basket won’t fit.
I would love to get my hands on one for my Fuji cube 22.4 gal. I might even consider buying an aquarium like one of the waterbox just so I could use one...
I got the specs online and ordered a IM 14 peninsula. It says online that all the nano IM tanks have a 2.8”x2.8” overflow chamber. That should be true for your IM Nuvo 20.
I like the laser cut version as well but the issue is that the all 3d printed version that I am making now is so much better in nearly every way. I am about to integrate design elements directly into the printed version that I could never do with the laser.
One huge recommendation i could make is making the whole structure stronger mine came in broken and it was such a tich fit when i wnet to remove it i brokt the other 2 legs still works good but ya gotta buy another one at somepoint or might go back to filter floss is cause this thing is notorious for draining my return section and flooding my tank
Damn, the 35.2 sock chamber is just a little bigger. I’m moving from my pen 25 to a 35.2. The chamber is 81x120x450 as opposed to the 80x80 for the smaller cube and mini pen tanks. If you can get them for the larger waterbox aios I’m in for two since they all have two sock chambers.
I genuinely hope the "next tank" is Red Sea Max Nano :D This is what is missing on the market and i think you have hit a jackpot sir. Praying for shipping to the EU or i am forever stuck with socks :P
Love the concept. Shame there isn't more size varieties for fleeces so you don't have to cut them down. Why don't you put a screwdriver slot or cross or even a socket shape on the end of the hubs so you can use a cordless drill to roll the fleece material onto them?
@@ISeaLive Excellent. Don't suppose you've let the files out yet? I'd love to add a float switch and motor to your design! I designed and printed an automatic roller filter for my main tank when they first started appearing on the market. Hated cleaning filter socks!
@@ISeaLive I would be very interested due to my mechanical filtration being very limited. So please keep me updated! I’ll be looking forward to ordering one I’m a big fan of these filters! I was extremely excited when I saw your videos bc there was hope.
Your work is really fantastic, i would like to have one in my tank, but i need to keep cost as low as possible and almost everything that i have is diy (including tank itself). Still your rollermat is an inspire for me and i will try to do it by hand, maybe pvc foam board will do the job as skeleton material (i dont have acces for 3d printer). Good luck with future projects :)
@@frenodog hey, sorry my email is swamped. Been trying to find time to reply to everyone. I’ve got a video coming out in a few weeks for the 4” filter socks roller mat.
@@ISeaLive no problem, i ended up making one, fully printable and automatic. ruclips.net/user/shortsonMDpsJW4dc?feature=share a work in progress but promising.
Yeah, I did consider that but the major issue is 3d printing. The orientation of the print would have to change and it would take nearly double the time to print.
Do you plan on selling the fleece cut to size on your store as well? Or can you drop a link where you've been ordering those smaller rolls from? Maybe if you get enough volume going you can find a manufacturer to produce them in the correct width for each version, on much smaller spools so you don't need to re-roll them every time
At the moment I’m using whatever replacement fleece rolls I can get my hands on. I’m hoping to find a quality supplier and get some custom sized fleece rolls soon.
Hey man, hope you're well could I please get my hands on those files I'd like to make my own, I'm happy to pay I appreciate the work you've put in just let me know
Take my money! No, seriously I just ordered one for my Waterbox Cube 20, looking forward to adding this to my tank! Awesome job making this for Nano AIO. Two questions 1. Does the kit come with a filter roller? 2. How long would you say a filter roller lasts - I know it varies tank to tank, but how long did it last you?
Thank you for the order. Yes it comes with a roll and I am yet to use an entire roll. My guess would be about 2 months but I’m still not even close to finishing my first roll.
These mini rollers are awesome. Game changing for us nano AiO guys (all my tanks are nano AiO tanks), but I have one suggestion on a possible improvement. A lot of us run media trays/towers instead of socks because it gives us a place to put carbon, GFO or other media in the "space is at a premium" back chambers of our AiO tanks. What about a version of a roller like this that was shorter and had a tray (or 2) under it so that we had a place to put our media without sacrificing another back chamber? water could flow through the fleece, through the media tray and then continue on it's merry way. Yes. I really would like to have my cake and eat it too! :D
💯 the Media tray roller mat is a solid idea. I already created one but the major issue was that it nearly doubled the 3d printing time from 8 hours to like 16. I think I’ll do a premium version in the future.
Quick question, what micron size fleece are you using? I picked up the roller and a few replacement rolls. First one lasted 4 months, this next one maybe 4 weeks. Not sure if there was a difference in fleece sizes being used there.
@@ISeaLive weird as I have less fish and it clogged faster. Just ordered my own fleece to cut and it matches the 200 microns so at least on the right track here.
You are like the 4th person that has said that in the last few days. It won’t work without the bars but I mentioned to some others that I can print you new bars but you would have to glue/silicone them back in.
Is there a way to get the files to 3d print this and the one for the Fluval 13.5? I’ve looked in several places and can’t seem to find where you have shared them.
Nice work mate! Nice design. Do you sell the files somewhere ? I would be interested to buy them and print a copy by myself, since sadly shipping is out of the question here for me :( Thanks mate !
My man I'd seriously be looking into getting a patent for this and see about going worldwide..... but first let me get that nuvo 20 cause paperwork will slow down R&D xD
I have a Waterbox 130.4 as a freshwater and run two Klir DI-4 in the sump, change the fleece about every 3 months or so. Have been considering a WB 20 Cube lately and my hang up has been filter socks after getting so used to rolls. Running across this video may have been the deciding factor to pull the trigger on one. Question though, say the fleece clogs up and you forget to roll, can you show how that goes with over flows?
Hey it’s totally possible that the fleece clogs but I haven’t come close to that yet. The rear wall of the Waterbox is about 3mm lower than the exterior glass of the tank. Worst case scenario the water lever in the tank would rise and spill over the rear wall into the filtration chambers. One would have to leave the tank unattended for a while.
@@KoiBoy6 I'm currently finishing up the first batch of 20. I'll probably ship out the first preorders next week. It's about 2 weeks from coming off the pre order.
I have a WB 33g shallow tank,(discontinued now 😢) that I will be setting up next year and want to have everything ready just to plug everything and cycle it, seems like this won’t fit in the openings, they are bigger, or would it?
@@ISeaLive Filter sock chamber: 161 x 120 x 450 mm (6.3" x 4.7" x 17.7"). The width of the AOI filter chamber is 4.7". Filter socks: 70 mm (2.75") x 2. You should to charge ~$50 to make sure it is worth your time.
Awesome! Can’t wait for the IM version
Yup that’s next
Just bought a waterborne 10g. Going to be buying one of these now. Genius!
Awesome 👍🏻
Another banger. Can't wait for a redsea version. Will buy for sure
It’s coming after the IM tanks.
1: I thought you “laser beam” was hysterical. 2: what a great job. 3: you have some amazing equipment. 4: I’ll be buying one this fall. And 5: Jet is adorable!
Thank you 👍
I don't always comment, but when I do, is to salute you sir for this great project, nano ppl riiise!
Solid, thank you. 💯 nanos !
This is awesome
Love this design! As requested, I liked, subscribed, and am commenting! Will you please share the files with me? :)
Very excited for the IM version. Instant buy.
My I’m tank arrives next week 👍🏻
@isealive, how is the IM version coming along?
Innovative Marine NUVO fusion 20!!! Pleas! so cool!
I just purchased one so it’s coming really soon. 👍🏻
I just ordered this for my tank. I saw you have had a rough year but it would be great to see Generation 3 on video. Might boost your sales. 👍🏻
Thank you and that is a great idea. I am constantly updating the roller mat and the Gen 3 model is vastly better than anything before it.
Really looking forward to this for my IM 60.
The smaller IM tanks are next then the larger ones. What size filter sock does the IM 60 use ?
@@ISeaLive 4 inch
keep up the good work! Your roller is going to be all the rage on AIO's.
That would be awesome 👍🏻
Brilliant idea. 👍
Definitely gonna order one from you.
Awesome, thank you👍
Looks awesome! I preorderd one can't wait to try it out
Awesome, thank you 👍🏻
Just pre-ordered mine! I've wanted to get a 3D printer for a while but don't have the space until we move. So excited to get rid of my current filtration setup!!!
Thank you Dilbert. You should totally get a 3d printer but you have to stick with it. It’s easy to get discouraged then your print will just be a heavy paper weight.
unreal! Well done. Make a stand alone version that can be plumbed into an overflow to live in the sump
That’s not a bad idea 👍🏻
@@ISeaLive Or even better yet, a 4in filter sock adapter roller
Awesome work do you possibly sell the file somewhere. Awesome design
Amazing work, going to pick one up.
Revolutionary for the AIOs. Makes some for the Innovative Marine AIO. I cut some light diffuser to make a small rack for a filter pad. This would definitely same time and a little money on buying floss and cutting to size.
The IM tanks are coming next 👍🏻
Definitely not in a place to teach, but suggest to maybe lay a piece of heavy cloth(jean/sweatshirt) over the teeth of the clamps to prevent possible indentation to the plastic. Love your work. Can't wait to get one when I'm ready.
just an idea to make the initial install of the paper roll easier. if you can have a Philips or square nut engraving on the rolling wheel so we can use electric power drill for much faster rolling
Thank you for the idea. I actually did exactly that. The roll hub has a gear on it so I printed a socket that goes in the drill.
Or even a small crank handle.
THIS IS GENIUS
Ooh this is what I need for my waterbox, it's the Waterbox Marine 45.2 with 2 overflow combs on each side. So I'm guessing I would need one for each. Hope to see a bigger size available soon! Keep up the ingenuity and great work!
Would love one for the Red Sea Max Nano 20G as well!
I’ll be doing it soon but I have to get creative because the bracket that holds the filter sock is permanent and cannot be removed.
@@ISeaLive I see, that definitely makes it a bit more difficult on your end to design. Hopefully theres a solution to it, would love to buy one :)
innovative marine 30l please! lol I think the 40 also have the same intake chamber dimensions
Yup that’s next. I was checking out the tank specs and it looks like just 2 sizes will cover most of the IM all in one tanks.
This is such a great idea, and keeping it simple with the hand crank instead of fussing with sensors and motors really works well for the small desktop aquariums! I'd love to have one on my IM Fusion 25 Lagoon tank! All the IM Fusion desktop tanks share the same filter chamber dimensions so it would be super simple to have one that fits them all! Eagerly awaiting the IM drop!
I’m with you Connor, I didn’t use a motor or sensor because I prefer reducing the total number of electronic used on the tank whenever possible. At some point everything fails and the more you have is increasing the possibility of failure.
I would be very interested in one that the first basket actually hangs from the side or back of the Waterbox 25 peninsula, removed the strip from inside of the chamber for a media basket. Also have a IM Nuvo 40 Gen 1 .
You the second or third person to say they removed the brackets inside the Waterbox. I could print you some new ones if you wanted to reinstall the pieces.
Howdy! Any roller mat plans for Waterbox AIO 50.3 (regular aquarium, not peninsula).
Yes, I have a plan for the larger aquariums that I think is going to work.
I’ve been so excited for this video! Great job again. I’ll be ordering mine now
Awesome, thank you Ricky 👍🏻
I do have a question for you. I bought my waterbox 20 used. And they cut out the filter sock holder to place a media holder. And I see your filter roller is held in place by that. Do you happen to know the dimensions of the small acrylic pieces that hold the sock in place? I’ll silicone them in myself.
@@rickymcnugget4635 I don’t know the exact size but my guess is that it is just a 4mm ledge on the front and back of the chamber. Anything small should work. Just don’t go to large or the basket won’t fit.
Thank you. I’m gonna order mine tonight. Can’t wait to install it.
I would love to get my hands on one for my Fuji cube 22.4 gal. I might even consider buying an aquarium like one of the waterbox just so I could use one...
3.46 x 3.54, would buy it right out. Just check waterbox prices and the wifey said NO. So I'm at your Mercy...LoL
I’ve got the Fuji cube on the list. It’s got a few tanks in front of it tho.
Another excellent job chief. I definitely need the Evo one. Please advise if I could get that from you at your convenience. Awesome
Are you looking for the files ? Shoot me an email. Mark@isealive.com
Id order 2 of these in a heartbeat for my waterbox 50.3 aio if u can make them fit!!
I’ll be working on the larger version soon.
Love it, another great job, as always!
Thank you Montys reef 👍🏻
Love it! Keep it up! If you need any measurements off an IM nuvo 20. Let me know!
I got the specs online and ordered a IM 14 peninsula. It says online that all the nano IM tanks have a 2.8”x2.8” overflow chamber. That should be true for your IM Nuvo 20.
Red Sea max nano roller mat would be nice :}
It’s coming soon 👍🏻
This is amazing! Great work. Any chance you have the files? Would love to print this in petg for some trials.
Hey, shoot me an email, Mark@isealive.com
Yoy definitely got to make one for the jbj 20 rimless aio nano tank ill buy one right away I'm sick of filter floss lol
One for the Red Sea max nano would be awesome
That’s a hard one. I’m still trying to figure out how to do it because the filter sock bracket is permanent and the sock is so small.
@@ISeaLive yeah I can imagine it would have to replace the skimmer!
Incredible work yet again! 100% buying one as soon you make one for the red sea max nano :)
Red Sea tanks are coming right after the innovative marine tanks.
Looks awesome! Did you make one for the red sea max nano? Txs!
Love your work man!!! And looks just as good as most big manufacturers. And would love to see you do one for a 24g aquatop!! Would buy one instantly
Thank you, it’s on the list but a few slots back.
PLEASE make one of these for the IM tanks!!! Biggest complaint is having to change filter floss!
100% I just got the IM Peninsula 20g so I'm going to be making the filter for that very soon. All the smaller tanks have the same size filter section.
Awesome! You’ll see my name on the order list when you do!
Flawless!!
Hey I love the laser cut version hit me up with a estimate for that one be gentle lol
I like the laser cut version as well but the issue is that the all 3d printed version that I am making now is so much better in nearly every way. I am about to integrate design elements directly into the printed version that I could never do with the laser.
@@ISeaLive all good I made a order already keep up the good work
Liked and suscribed is there any way you could sell the file for this design
One huge recommendation i could make is making the whole structure stronger mine came in broken and it was such a tich fit when i wnet to remove it i brokt the other 2 legs still works good but ya gotta buy another one at somepoint or might go back to filter floss is cause this thing is notorious for draining my return section and flooding my tank
Thank you for the feedback. The automatics roller is coming soon 👍🏻
@@ISeaLive can't wait!!!! I absolutely love this filtration setup then any others I've had and the Mat itself last so long
Wish you could come up with something for the Fluval 32.5. Fluval should have designed that system to use filter socks instead of sponges.
I’ll have to check out the tank.
I have a waterbox 25 I would love the files! I'd love to print one
Shoot me an email. Mark@isealive.com
Damn, the 35.2 sock chamber is just a little bigger. I’m moving from my pen 25 to a 35.2. The chamber is 81x120x450 as opposed to the 80x80 for the smaller cube and mini pen tanks. If you can get them for the larger waterbox aios I’m in for two since they all have two sock chambers.
That should be to hard. The only issue is testing. Does anyone in So Cal have a Waterbox 35.2 I can test out the design on ?
I’m ALL the way on the other coast
@@ISeaLive the 50.3 has the same sock box dimensions
Alas, I’m in NorCal. If I buy a 50.3 will you make a trip up the coast? I have digital calipers and can take accurate dimensions in advance.
Dude patent that shit. Immediately!! This is a whole business! Once people start posting these on IG and RUclips reviews your gonna start blowing up
That would be awesome 👍🏻.
It would be nice to see them for innovation AIO
Just a few weeks away.
Wow! That's so cool! I wanna make one too. 😅 Where did you get the model for the Ai prime 16hd?😅
Shoot me a message at iSeaLive.com
Hello,
nice creation. I was asking myself if it would be possible to fit some kind of cheap clock motor to slowly roll the thing?
Yes, it is totally possible. I'll be adding something like that soon.
Great work! Would it be possible to do something like this for the Red Sea Max Nano 20g?
Yes, I will get to the red sea tanks right after I do the IM tanks.
@@ISeaLive Awesome news! I'll be the first one to order one! :)
Love it
Thank you.
I genuinely hope the "next tank" is Red Sea Max Nano :D This is what is missing on the market and i think you have hit a jackpot sir. Praying for shipping to the EU or i am forever stuck with socks :P
The max nano filter sock bracket is permanently secured inside the tank don't think I'll have to make one that fits the filter sock holder.
i'd love to get the files as im situated in europe so shipping is gonna be very expensive!
Shoot me an email. Mark@isealive.com
Cheers from Spain, great work there. If is possible can i get the files to print myself? Thanks.
Thank you, shoot me an email with what your looking for Mark@isealive.com
@@ISeaLive send it
Love the concept. Shame there isn't more size varieties for fleeces so you don't have to cut them down. Why don't you put a screwdriver slot or cross or even a socket shape on the end of the hubs so you can use a cordless drill to roll the fleece material onto them?
Haha that's exactly what I do now. This was just the first attempt so I did it the hard way.
@@ISeaLive Excellent. Don't suppose you've let the files out yet? I'd love to add a float switch and motor to your design! I designed and printed an automatic roller filter for my main tank when they first started appearing on the market. Hated cleaning filter socks!
@@matthewsearle4822 yeah just shoot me an email Mark@isealive.com
Is that your pet that walked across the screen after you used the vise?
Do you plan on making one that fits a 5 gallon life guard all in one? If so I’m completely sold!
In the future, yes 👍🏻
In the future, yes 👍🏻
@@ISeaLive I would be very interested due to my mechanical filtration being very limited. So please keep me updated! I’ll be looking forward to ordering one I’m a big fan of these filters! I was extremely excited when I saw your videos bc there was hope.
Your work is really fantastic, i would like to have one in my tank, but i need to keep cost as low as possible and almost everything that i have is diy (including tank itself). Still your rollermat is an inspire for me and i will try to do it by hand, maybe pvc foam board will do the job as skeleton material (i dont have acces for 3d printer). Good luck with future projects :)
You should totally get a 3d printer in the future. About $200 for a decent one that will get the job done.
Make this for the Fiji cube AIO kits!!!
Hi, would be possible to get STL's? Great project, i would like to adapt it to a standard sock holder.
Shoot me an email. Mark@isealive.com. It your talking about adapting it to a 4” filter sock. I just did that so it's coming soon.
@@ISeaLive sent you a couple of email 2/3weeks ago but no answer :(
@@frenodog hey, sorry my email is swamped. Been trying to find time to reply to everyone. I’ve got a video coming out in a few weeks for the 4” filter socks roller mat.
@@ISeaLive no problem, i ended up making one, fully printable and automatic. ruclips.net/user/shortsonMDpsJW4dc?feature=share a work in progress but promising.
Is there any way you could make one for Red Sea nano 20 gallon
Yes but it’s coming after the IM tanks.
Hey I was thinking maybe you can add a filter media chamber like on the red sea reef mat
Yeah, I did consider that but the major issue is 3d printing. The orientation of the print would have to change and it would take nearly double the time to print.
Do you plan on selling the fleece cut to size on your store as well? Or can you drop a link where you've been ordering those smaller rolls from? Maybe if you get enough volume going you can find a manufacturer to produce them in the correct width for each version, on much smaller spools so you don't need to re-roll them every time
Yes, I am also selling the fleece rolls as well. They need to be a custom size and on the specific hubs to work properly.
@ISeaLive where do I find the fleece rolls for the waterbox 25 rollermat
This is rad! Can I get the stls?
Shoot me an email. Mark@isealive.com
That laser equipment look expensive. Super cool ….What brand of fleece do you use for this?
At the moment I’m using whatever replacement fleece rolls I can get my hands on. I’m hoping to find a quality supplier and get some custom sized fleece rolls soon.
@@ISeaLive can’t wait for the fleece that will fit in it 😊
Can you make these for the JBJ nano line? Specifically the JBJ R-15 😀
All add it to the list 👍🏻
Hello,nice project.where we can get mat ?( Filter clothes)
You can cut and roll it yourself or get it on my website iSeaLive.com
Hey man, hope you're well could I please get my hands on those files I'd like to make my own, I'm happy to pay I appreciate the work you've put in just let me know
Hey Montys, no problem. Shoot me an email or text. I think you have my number.
@@ISeaLive Cheers bud I have dropped you an email
Any plans to build a filter roller for Innovative Marine tanks?
It’s all done. I just gotta test it out… it’s going to be a few weeks.
@@ISeaLive awesome. Happy Reefing
Can you attempt one for a innovative marine fusion 20 ?
It’s done and currently getting tested 👍🏻
Take my money! No, seriously I just ordered one for my Waterbox Cube 20, looking forward to adding this to my tank! Awesome job making this for Nano AIO. Two questions 1. Does the kit come with a filter roller? 2. How long would you say a filter roller lasts - I know it varies tank to tank, but how long did it last you?
Thank you for the order. Yes it comes with a roll and I am yet to use an entire roll. My guess would be about 2 months but I’m still not even close to finishing my first roll.
Got any plans on making one for innovative marine 50 lagoon
Yes, I have already checked out the tank specs and started modeling some parts.
I want one
These mini rollers are awesome. Game changing for us nano AiO guys (all my tanks are nano AiO tanks), but I have one suggestion on a possible improvement. A lot of us run media trays/towers instead of socks because it gives us a place to put carbon, GFO or other media in the "space is at a premium" back chambers of our AiO tanks.
What about a version of a roller like this that was shorter and had a tray (or 2) under it so that we had a place to put our media without sacrificing another back chamber? water could flow through the fleece, through the media tray and then continue on it's merry way. Yes. I really would like to have my cake and eat it too! :D
💯 the Media tray roller mat is a solid idea. I already created one but the major issue was that it nearly doubled the 3d printing time from 8 hours to like 16. I think I’ll do a premium version in the future.
@@ISeaLivedid you ever end up making a “premium” version?
Hello excited to make my purchase! does the unit come with the first roll of filter media?
Awesome, and yes, the roller mat comes with a roll already installed.
Quick question, what micron size fleece are you using? I picked up the roller and a few replacement rolls. First one lasted 4 months, this next one maybe 4 weeks. Not sure if there was a difference in fleece sizes being used there.
The fleece has all ben the same 200 microns every time. I do plan a seeking out some other options soon.
@@ISeaLive weird as I have less fish and it clogged faster. Just ordered my own fleece to cut and it matches the 200 microns so at least on the right track here.
@@KoiBoy6 yeah it has always been the exact same fleece that I purchased, cut and rolled. Maybe they had a different batch they sent me or something.
What about us heathens that removed the holder bars to install media baskets in our
Mini 15? Will this design still work? Can u alter to make it work?
You are like the 4th person that has said that in the last few days. It won’t work without the bars but I mentioned to some others that I can print you new bars but you would have to glue/silicone them back in.
Is there a way to get the files to 3d print this and the one for the Fluval 13.5? I’ve looked in several places and can’t seem to find where you have shared them.
Hey, just shoot me an email. Mark@isealive.com
@@ISeaLive awesome thanks! 🎉 love your videos! They are well put together
Is there one out for waterbox 35.2? 😊
Yes, check out the website. It’s the larger Waterbox nano tanks.
Do the Waterbox 35.2 AIO!
The larger Waterbox tanks will come soon.
Whats the finished height of the basket for this roller? This looks like it might work on my 20Long AIO build. As long as its not too tall
I’m pretty sure the 20L works. You would have to check out the tank specs online. The basket is like 7-8 inches long
@@ISeaLive 7-8inch is perfect. With how i plan to do things 9¾" is about the max i could do. Thank you, ill be making the purchase soon
does the dirty roll smell super bad? i wonder if it might make the house/room smell. not sure if theres anything to do about it though.
I haven’t had an issue with smell yet. I am going to be adding a cover to the top soon.
Nice work mate! Nice design. Do you sell the files somewhere ? I would be interested to buy them and print a copy by myself, since sadly shipping is out of the question here for me :( Thanks mate !
Send me an email. Mark@isealive.com
My man I'd seriously be looking into getting a patent for this and see about going worldwide..... but first let me get that nuvo 20 cause paperwork will slow down R&D xD
The IM version is done and starting testing.
I would love to get one of these for my waterbox peninsula 15. How much are they and how do I get my hands on one?
Hi Avis, check out the link in the description. ☝️
Hell ya so glad you did mine first 😂 on my way to buy one, is the lead time pretty short?
It’s going to be a few week because I’m weight in some shipments of materials before I can start making more.
@@ISeaLive no problem, awesome product, I'm sure we all appreciate your work ethic making these for so many different tanks. You the man!
Can u make one for the G2 red sea nano max
It's coming in about a week.
@@ISeaLive let me know whenever it's available I want to purchase one
I have a Waterbox 130.4 as a freshwater and run two Klir DI-4 in the sump, change the fleece about every 3 months or so. Have been considering a WB 20 Cube lately and my hang up has been filter socks after getting so used to rolls. Running across this video may have been the deciding factor to pull the trigger on one. Question though, say the fleece clogs up and you forget to roll, can you show how that goes with over flows?
Hey it’s totally possible that the fleece clogs but I haven’t come close to that yet. The rear wall of the Waterbox is about 3mm lower than the exterior glass of the tank. Worst case scenario the water lever in the tank would rise and spill over the rear wall into the filtration chambers. One would have to leave the tank unattended for a while.
@@ISeaLive What is the lead time on these with the pre-order?
@@KoiBoy6 I'm currently finishing up the first batch of 20. I'll probably ship out the first preorders next week. It's about 2 weeks from coming off the pre order.
@@ISeaLive Sounds good. Just placed an order tonight along with some rolls.
@@KoiBoy6 awesome, I just saw that.. Thank you 👍
I have a WB 33g shallow tank,(discontinued now 😢) that I will be setting up next year and want to have everything ready just to plug everything and cycle it, seems like this won’t fit in the openings, they are bigger, or would it?
You should check out the specs online. Look to see if the rear overflow chamber is the same size as the other WB tanks in the title.
This are the dimensions 23.6”x5.1”x12.4” which are different from the tanks you made the roller for.
@@mike-dq5ro that’s just the size of the rear overflow chamber? That huge. Are you sure that not the entire rear chamber?
@@ISeaLive yes you’re right, it actually is 3 3/4”x 4 21/32” it comes with 2 overflows.
I would like one that fits the WaterBox 65.4 Peninsula AIO. You are not charging enough.
What size filter sock does the WB 65.4 use ? You might be right about the price.
@@ISeaLive Filter sock chamber: 161 x 120 x 450 mm (6.3" x 4.7" x 17.7"). The width of the AOI filter chamber is 4.7". Filter socks: 70 mm (2.75") x 2. You should to charge ~$50 to make sure it is worth your time.
How deep does the cage sit in the overflow chamber?
I think it’s about 7-8 inches. I don’t have the exact measurements with me right now.
@ISeaLive thanks I've got a chiller outlet drilled in that chamber bulkhead is 200mm from the lip the cage sits on.
Could fit in a Red Sea max 170 E AIO?
It’s can’t but I’m working on a model.
Where and how do I buy one for a fluval evo! 😳😍
Sorry I just seen at the end of video, how long is wait time if I preordered? Thanks Aaron
I made them available on ISeaLive.com 👍🏻
Have one for the waterbox 50.3? I want one so badly
I just finished it if you would like to be a tester.
@@ISeaLive you finished one that will work in my waterbox 50.3? I’ll test it 😊. How do we go about setting that up?
@@Kenny_Edmonton shoot me an email Mark@Isealive.com
Where did you get the stand for this tank?
I built it, check out some of my earlier videos.
So I’m guessing you manually turn it occasionally? I’d buy one for my waterbox peninsula 25
Yeah, I am rolling it just a few inches a day right now. This model does the WB pen 25g 👍
Roll prices?
Hi mate. Do you sell the files? I'm after one fitting the Peninsula 15. I have a printer. Any help is much appreciated. Cheers
Hi, I’ll make the option available shortly.
Hey mate do you ship to Australia? Keen as yo buy one!
I do but I am not sure what the rates look like.
@@ISeaLive it will be what it is haha, I'll be putting in an order in the next few weeks 😀