Handling rank cattle is some of the most fun a man can have with his clothes on. I used to build pens 9' high out of cypress board, cause it would give when pine would crack.
I completely switched over to knipex plier sets. But buy them direct ... snap on marks them up another 100 to 150 bucks. They are one of the best in my opinion
Actually snap on is the cheapest of all the tool trucks on Knipex. Take a look at this video and I show you why that is ruclips.net/video/hxN8weBLFo4/видео.html
My dealer tries to give me free hats every time he gets new ones in. If I'm buying something that week, I'll take the free hat. But if I'm just browsing, I insist on paying for the hat. Seems a fair deal to me! Lol
Stepped on the Snap On truck yesterday, grabbed a bunch of stuff and told him don’t tell me how much it cost just throw it on the bill, Lol sometimes it’s better to not know
Just like he says the tools are only as good as the person who sells em I love my matco dealer therefore I buy matco same with majority of people at my shop no one really likes the snap on guy we all love there tools don’t get me wrong but dealers a shithead so he don’t get the 4K (don’t kmow exact but has to be a lot) payments that my shop throws at our matco guy🤷♂️
Great video as always Clay, I alway get free hats, shirts, jackets, and other promo stuff from the Snap-on dealers, but not from my Matco however he gives me great deals well below list price on tools so I'm good with that.
LoL the other day going down the freeway I seen a cow on the other side of the fence and probably 30 seconds later on the other side I seen a state trooper headed its direction so I flashed my lights at him signaling so he could make a u turn that was nearby between the ditches separating N and S bound... After I made my stop about 20 minutes later on my way back up that trooper had got ahold of the farmer and so he was helping slow people down so nothing bad happened.
True about the packaging! It gets thrown away immediately. There's some Snap On tools I don't even know what I paid. I just look at my dealer and say, "Is my payment going up or staying the same?". If he replies with "staying the same". I walk out of the truck with it!
My 7" knipex cobras stay in my pocket every day doing water service work. They get used as a hammer for curb box lids atleast once or twice a week and get used on every meter change. They tighten up packing nuts on leaky valves. They are going on 2 years old now and still hold up great. Ive been tempted to keep a 2nd pair of 12" on my truck for plumbing up my brass parts on meter set rebuilds. I honestly dont like standard channel locks anymore. i've been converted.
My snap on guy is pretty cool. He does giveaways all the time for $1,000 worth of tools, speakers, hats with purchases of $400 or more. I’ve not seen a tool box, but if you buy a new box you get a massive tv and Nintendo switch with it.
@@KoonTrucking Yeah I have seen how Nepros does it. That is actually the only time I have really noticed packaging. All I could think is: man the packaging is ridiculous on these things.
Most definitely drinking the corporate kool aid because KNIPEX is the king of pliers. If not why are they sold on EVERY tool truck. Nobody can touch Knipex. Not even close !
That is how you do it! If your buying alots of tools then like you said whats 20 bucks. However if you buy 100 bucks every 6 months they why not also shows that your not looking at the money but looking at the sale makes you money
I’ve had my Zeus a little while …. It takes a bit to get used to. Get a cart and get a tv ….. I use the scope all the time and it pays for a bigger screen to watch from a little ways back so that way your eyes don’t go all crossed from staring at it
@@outlawengineworks3539 I got the dock, zeus and 27" touch screen monitor package. I'll be upgrading my service cart so I can mount it and make use of the larger monitor. I heard the scope module works when it is undocked is that true?
@@justforkiks29 I don’t have the dock ….. I just kinda have mine on my cart with a 38in monitor attach to the he back of the cart … I use a new Vizio tv cuz It pairs wirelessly to the tv …so I can set it down play with it and watch the broadcast…
When I got my 14.4 about 12 of them from my old dealer I always got a hat and 3 coats new guy does not have a lot of hats he is to new. He has to pay for that shining new truck.🔧🔧🔧🔧
You guys must have different pounds down there. My son just picked his 4H calf and his was mid sized at 715 lbs. during the club weight in last week. His target slaughter weight is 1400 lbs. by the end of May.
I actually like Snap On’s packaging. Has a nice glossy finish with colorful graphics on the outside, pretty thick cardboard stock, and gives the impression somebody placed the tools in it by hand, which has an element of nostalgia to it. Plus their shrink wrap is high quality. I never see a sealed Snap On product with rips or cracks in the shrink wrap.
Funny you mentioned the package rips haasl tools just posted on his Instagram delivering screwdrivers to a customer and shows the package ripped open from the plastic.
I'm still pissed at the Honda salesman that said he would get a free hat when some came in. After I bought my wife's car he forgot all about it. I won't ever buy another car from that SOB again I can promise you that!
I finally broke down and got a snapon box after the slides in my harbor freight one started locking up and he gave me 1200 off because it was in the truck and he considered it used even thow it just has two scuff marks on the bottom drawer
QUESTION: What to do when you come in and your toolbox is damaged, dent, scratched (deep), moved / moved outside, etc? Supervisor: "Maybe you need to take you and your box home." My AWP failed on the edges of the channel chipped off.
It’s funny you mentioned cows getting loose on shit days. Had a guy stop by our salvage yard where my grandpa is usually at and he ran in yelling about our his cows out and the first thing he said was “I AMOST TURNED YOUR COWS INTO HAMBURGER WITH MAH TRUCK” lol 😂😂 that pissed my grandpa off hearing him say that rather than just saying they are out
@@donotrobme9295 lol no the guy telling my grandpa was all hillbilly as you can get. It didn’t help either they had gotten out a few days prior so he just got annoyed by the joke. We can laugh now but animals getting out does suck.
My tool truck dealer would use double underwear just so he won't accidentally give you the sweat of his bxlls by accident! Great show,I really enjoy the convo
My snap on dealer gave me a free jacket. No purchase grant I have spent quite a bit of money on the truck. Then my Marco dealer spent just as much on can’t give me a free hat so I owe Matco 40. Bucks and I’m done with that. Same way up north in Indiana clay everyone wears hats.
I had a great snapon dealer that would give me something free for the amount of money I would spend with him. Have a new dealer now And doesn’t give no deals or anything free so I stopped buying snapon. Went and spent my money with the Matco guy now.
That’s the epiq it doesn’t have the gap issue like the master series i had before because they put the bracing inside the top box rather than on the bottom like the master series
@@KoonTrucking nice to no but that 6s would be hard to beat the epic has some real nice things like the lights and remote control locks i don't think anyone else has these nice features
I sure do miss these stories had to come back 1 year later for my Hamilton and Clay show 👍😎👍
No matter how the week was Snap On Friday always makes it better.
Had to come back here to tell you what my dealer gave me for Christmas. A Snapon dust pan and broom. LOL
My old dealer gave away hats, shirts and them little plastic 6 pack ice chest...The way he seen it. Free advertisement...
Every time I see that vice on his truck it reminds me of when Thomas put those holes in it with a center punch
Hi Clay, Thanks for telling us about Knipex a while back. I tried one and love it. I have 3 Cobras now and will be picking up pliers soon...
I drove home from the meet up with a few Snap-On hats, towels, socks, etc….
Can't wait for the 3/8 brushless!
Won a Klipsch snap on speaker today from my dealer. Good times!!
Hello again Clay
Thank you for another Great Video. Son I think you're having way too much fun. Stirring the pot!!! Lol ;))
That’s awesome that some of those shops are getting their techs stuff from snap on ! I’ve never heard of that at all.
I always love the socks they are the best
Lmao! “I dunno bout eatin no farm raised cow”
I bought a SO just like the one Hamilton is wearing in this video, from him at the meet up. Still like brand new. It is my “sunday” hat. 👍🏻
That CT761 is definitely my favorite impact.
I like the snap on packaging, lol. I keep all my boxes.
I love my snap on guy, just bought a new roll cart and he gave me a jacket and a hat. Just for a roll cart, blew my mind
Good thing it’s Friday. Been a 6300 mile week. Time for some tool talk after a busy week
Yeah your so right on the packaging .... 1000 bucks on a socket set and it comes in a cheap flimsy tray
Had a Holstein heifer climb out an open top trailer one time.
Maybe "shag green carpeting" could add flair to the packaging?
Handling rank cattle is some of the most fun a man can have with his clothes on. I used to build pens 9' high out of cypress board, cause it would give when pine would crack.
Those little green pliers are hard to top!!
Priefert panel are the best
I completely switched over to knipex plier sets. But buy them direct ... snap on marks them up another 100 to 150 bucks. They are one of the best in my opinion
Actually snap on is the cheapest of all the tool trucks on Knipex. Take a look at this video and I show you why that is ruclips.net/video/hxN8weBLFo4/видео.html
My dealer tries to give me free hats every time he gets new ones in. If I'm buying something that week, I'll take the free hat. But if I'm just browsing, I insist on paying for the hat. Seems a fair deal to me! Lol
My snap on guy got me with the 100th anniversary swivel ratchets. They were 100 off
Matco packaging isn’t bad. At least the stuff I’ve gotten. Mac too.
FInally grabbed a PH3050 air hammer in green this week, that thing got all of the punch!
Stepped on the Snap On truck yesterday, grabbed a bunch of stuff and told him don’t tell me how much it cost just throw it on the bill, Lol sometimes it’s better to not know
Exactly
Awesome video
Epic box red and black looks sharp
What a great day it is indeed!
When I had quad runners, I would order exhaust etc and I would be pissed if I didn't get a sticker! Good video.
Wish all dealers were held to Hamilton’s standards, they’d sell a lot more tools
Just like he says the tools are only as good as the person who sells em I love my matco dealer therefore I buy matco same with majority of people at my shop no one really likes the snap on guy we all love there tools don’t get me wrong but dealers a shithead so he don’t get the 4K (don’t kmow exact but has to be a lot) payments that my shop throws at our matco guy🤷♂️
Man I had a deer steak one time when I was young
I totally agree. The packaging definitely looks cheap for a company like snap on. As always great snap on Friday video 👍
Great video as always Clay, I alway get free hats, shirts, jackets, and other promo stuff from the Snap-on dealers, but not from my Matco however he gives me great deals well below list price on tools so I'm good with that.
Hell free stuff?? I can’t get my dealer to come to the shop
LoL the other day going down the freeway I seen a cow on the other side of the fence and probably 30 seconds later on the other side I seen a state trooper headed its direction so I flashed my lights at him signaling so he could make a u turn that was nearby between the ditches separating N and S bound... After I made my stop about 20 minutes later on my way back up that trooper had got ahold of the farmer and so he was helping slow people down so nothing bad happened.
“You know when you put that tool in your hand…”. That’s where my mind was in the gutter Clay
True about the packaging! It gets thrown away immediately. There's some Snap On tools I don't even know what I paid. I just look at my dealer and say, "Is my payment going up or staying the same?". If he replies with "staying the same". I walk out of the truck with it!
My 7" knipex cobras stay in my pocket every day doing water service work. They get used as a hammer for curb box lids atleast once or twice a week and get used on every meter change. They tighten up packing nuts on leaky valves. They are going on 2 years old now and still hold up great. Ive been tempted to keep a 2nd pair of 12" on my truck for plumbing up my brass parts on meter set rebuilds. I honestly dont like standard channel locks anymore. i've been converted.
Nice!! I’m a water plant operator I keep the 150’s in my pocket every day
How are the double box flex head ratcheting wrenches they look nice and say usa on them
They are good
My snap on guy is pretty cool. He does giveaways all the time for $1,000 worth of tools, speakers, hats with purchases of $400 or more. I’ve not seen a tool box, but if you buy a new box you get a massive tv and Nintendo switch with it.
I've heard of a bull flipping a gooseneck trailer that was killed that was our connected how many head of cattle do you have
Can you do a review on the snap on 3/8 swivel sockets please 👍
yep I have talked about them on my Instagram before but I got you !
Heres the review. Snap on 3/8 swivel sockets are ggggggrrrreaat!
Buy the gearwrench.
👍🏼
I’ve actually gotten more from a snap on dealer that isn’t even mine than I have from either of my tool dealers
It's easier to sell when it's out of the box and in your hands. Presentation is quite a bit of the transaction.
Matco Friday over here! Love tool trucks
I have an uncle that is a farmer and we did get a half of beef from him.Has taken a few to get slaughtered
Where Can I get one of those Snap-on carhartt hoodies?
Yeah at no point have I ever thought: Snap-On needs to up there packaging.
I would say this definitely falls under, stuff nobody else cares about.
You know it’s cheap especially after seeing Nepros
@@KoonTrucking Yeah I have seen how Nepros does it. That is actually the only time I have really noticed packaging. All I could think is: man the packaging is ridiculous on these things.
I always thought they had the cheapest looking packaging. If they had some blue in it, they would sell more!
My snapon guy tried to tell me the snapon pliers are better than the knipex....i said u def a company man
Most definitely drinking the corporate kool aid because KNIPEX is the king of pliers. If not why are they sold on EVERY tool truck. Nobody can touch Knipex. Not even close !
@@KoonTrucking yea they sell knipex on every truck not snapon
Part number on those tiny green combination pliers ?
Fri- daaayyy!
Clay,you have never formally bought a hat or snap on jacket....but rest assured...you bought em! Lol
Ha ha at least i didn’t know it
That is how you do it!
If your buying alots of tools then like you said whats 20 bucks.
However if you buy 100 bucks every 6 months they why not also shows that your not looking at the money but looking at the sale makes you money
Do They Sell His Snap-On Carhartt Hoodie?
Well shit. Snap on guy got me good today. Got me one of them zeus scantools.
Nice
I’ve had my Zeus a little while …. It takes a bit to get used to. Get a cart and get a tv ….. I use the scope all the time and it pays for a bigger screen to watch from a little ways back so that way your eyes don’t go all crossed from staring at it
@@outlawengineworks3539 I got the dock, zeus and 27" touch screen monitor package. I'll be upgrading my service cart so I can mount it and make use of the larger monitor. I heard the scope module works when it is undocked is that true?
@@justforkiks29 I don’t have the dock ….. I just kinda have mine on my cart with a 38in monitor attach to the he back of the cart … I use a new Vizio tv cuz It pairs wirelessly to the tv …so I can set it down play with it and watch the broadcast…
Oh and order you a screen protector !!!! Mine didn’t come with one …..
When I got my 14.4 about 12 of them from my old dealer I always got a hat and 3 coats new guy does not have a lot of hats he is to new. He has to pay for that shining new truck.🔧🔧🔧🔧
Walnut cases would be sweet
Yeahhh budddy
You guys must have different pounds down there. My son just picked his 4H calf and his was mid sized at 715 lbs. during the club weight in last week. His target slaughter weight is 1400 lbs. by the end of May.
I like em about 750 myself good eating there
Ask Hamilton about toolbox shortage
A ball cap goes a long way with me to if I’m buying something and you can give me a hat I’ll buy for someone who will
I actually like Snap On’s packaging. Has a nice glossy finish with colorful graphics on the outside, pretty thick cardboard stock, and gives the impression somebody placed the tools in it by hand, which has an element of nostalgia to it.
Plus their shrink wrap is high quality. I never see a sealed Snap On product with rips or cracks in the shrink wrap.
Funny you mentioned the package rips haasl tools just posted on his Instagram delivering screwdrivers to a customer and shows the package ripped open from the plastic.
I'm still pissed at the Honda salesman that said he would get a free hat when some came in. After I bought my wife's car he forgot all about it. I won't ever buy another car from that SOB again I can promise you that!
You should see the cheesy packaging Williams uses.
I finally broke down and got a snapon box after the slides in my harbor freight one started locking up and he gave me 1200 off because it was in the truck and he considered it used even thow it just has two scuff marks on the bottom drawer
For the price the snap on packages should be gold plated.
QUESTION: What to do when you come in and your toolbox is damaged, dent, scratched (deep), moved / moved outside, etc? Supervisor: "Maybe you need to take you and your box home."
My AWP failed on the edges of the channel chipped off.
When is the brushless 3/8 impact coming!!!!!!
Who knows. I’m ready
I miss the Snap On Friday videos.
I dont see you going back to a snap on box even with a free bottom box after you got that white Matco setup.
Never know …..
Honestly, I'm kinda surprised Clay doesn't have a Hotty Toddy colored red and blue box.
Didn't the Cow jump over the mOOn?
What they claim anyways
Can I enter for that box???
Snap-on could probably improve on the packaging...
But go look at a set of Mac Tools 3/8 extensions, my gosh the plastic trays are
HORRIBLE !!!
I deffo agree on that so they should do trays like snap on where it is sat properly and not going to roll off or move forward like mac trays
Even the ICON at Harbor Freight does better than Mac Tools... way better !
Mac Tools your plastic trays are an absolute embarrassment !
@@jameswatkins7278 i live in the uk so no idea about icon but i love the mac extensions because on the knurled head but the trays are shit
I am so happy you guys know how annoying cows are. Also please show some videos of your animals
I’ve got some on here of them
@@KoonTrucking o okay
The cheap plastic trays piss me off cause they break SO easy., at least do some kind of blow mold case/tray!!!
P.s. The ending was killer LOL!
It’s funny you mentioned cows getting loose on shit days. Had a guy stop by our salvage yard where my grandpa is usually at and he ran in yelling about our his cows out and the first thing he said was “I AMOST TURNED YOUR COWS INTO HAMBURGER WITH MAH TRUCK” lol 😂😂 that pissed my grandpa off hearing him say that rather than just saying they are out
Gpa needs to relax. I doubt he meant he was gonna kill them
@@donotrobme9295 lol no the guy telling my grandpa was all hillbilly as you can get. It didn’t help either they had gotten out a few days prior so he just got annoyed by the joke. We can laugh now but animals getting out does suck.
@@dutchynehtam yes it does suck
🔧🔧🔧Hey Clay. I would like to buy that Jacket too get entered. Lmk where to do so 🔧🔧🔧
Unless you are on his route he can’t sell to you
My tool truck dealer would use double underwear just so he won't accidentally give you the sweat of his bxlls by accident! Great show,I really enjoy the convo
I deal with cows every day they are a pain in the ass
Big time
Not going to lie when I bought my epiq my dealer gave me. 1000 dollar limit and let me pick some tools out
I don’t have a limit that I know of yet…
My dealers take care of me
Milwaukee will put your stuff to shame dude
I'd wear hat if it came in 8 3/4
👍👍👍🤣🤣👍👍👍👍👍👍👍
My snap on dealer gave me a free jacket. No purchase grant I have spent quite a bit of money on the truck. Then my Marco dealer spent just as much on can’t give me a free hat so I owe Matco 40. Bucks and I’m done with that. Same way up north in Indiana clay everyone wears hats.
My snap on dealer is awful he is constantly pushing boxes lol never gives away hats or shirts unless you are buying a box
That sucks
CT761 made in China?
I think so. China makes good stuff though. So is Milwaukee
My matco guy in Myrtle Point won’t trade my snap on ratchets I don’t need for matco ratchet pissed me off
I had a great snapon dealer that would give me something free for the amount of money I would spend with him. Have a new dealer now And doesn’t give no deals or anything free so I stopped buying snapon. Went and spent my money with the Matco guy now.
First...
They should stop selling their sockets in those lay down flat plastics
They should sell em as complete sets and be in the green or red Hansen numbered socket trays
Way to buy the meat, buy off the Farmers.
With your ocd you would never be happy with that box even for free because when you put the top on it you still have the gap
That’s the epiq it doesn’t have the gap issue like the master series i had before because they put the bracing inside the top box rather than on the bottom like the master series
@@KoonTrucking nice to no but that 6s would be hard to beat the epic has some real nice things like the lights and remote control locks i don't think anyone else has these nice features