Just , it was good experience for me and i enjoyed the beauty and good work . I am not professional player but i lik to play this sport . God bless you, you are great artist .
I imagine that the situation must be similar to yours, with a lot of skill (throughout your life) in your fingers to write sarcasm but later in bed they became useless to satisfy your partners.
I trained as a toolmaker a long time ago ... your milling cutters need sharpening :-D (And a slightly higher cutting speed aka more RPM would probably help too). Apart from that: nice video
Nicely made. . The router bit that cut the handle could have a round shape to it, save shaping it on the sanding belt. Also I noticed that where the bit started and stopped when cutting out the bat it left an indentation, this could be avoided by starting the cut at the base of the handle on the corner. Phew that laser was super quick, there’s me thinking that was carved by hand : ) but I did notice a tiny chunk of wood had splintered off - quality control ? ?. Looks like the box that the bat is put in is more expensive to make than the bat itself. Obviously the bats are more for show as a serious player would apply their own choice of rubbers. P E A C E. : )
Man came in and critiqued one of the finest and most high grade table tennis racket artisans in the world, as if he was saying to his local baker that he left the croissants for too long in the oven🤣😂
@@nicolasgoossens I won’t justify my comments with my life long experience, knowledge and qualifications. Anyone with the understanding of working with wood will know exactly what I have said and advised in my comment is correct and fair. As regards the local baker remark, I worked in a baker’s shop from the age of 10 to 15, so yes, I would notice if something had been baked for too long.
@@FUNKINETIK no serious table tennis player uses these blades or rubbers. u were on point with your criticisms. hats off to the business owner anyway, gotta make a living out there somehow. im sure that the rackets you can find in a western sporting goods store are going to be less playable than these.
Здравствуйте! Очень замечательная работа с деревом! Но!! Почему нет лака на ручке, или финальной обработки?! Ещё 1 замечание. Не доверяйте заводскому клею на накладках, в нем есть пропуски, или неравномерность. Со временем образуются мертвые точки, пузырьки, или накладка отходит. Добавьте своего клея, рекомендуемого заводом изготовителем накладки. (Сейчас это на водной основе) Так ракетка прослужит дольше, и ваше качество будет радовать владельца много дней или лет. :)
Olá, i"am brazil. Vc vende essas raquetes que você faz? Se sim quanto que é? Pode envia-lá para mim quando for comprar. Sou novo e acabei de me inscrever e deixar like.
Applying glue is necessary when attaching rubbers to a blade but i know 2 rubbers that have factory-applied glue layers; DHS Hurricane 3 NEO and Yinhe Big Dipper You're welcome 😊
Dear Sir (GozipTong) ??? You're name - I was touched watching you're video On how you're bats are finely cut in articulate designs and artistic behaviour It was beautiful and a precious moment I would like to know 10:45s there was a Dense cut out in the handles I didn't get or understand that ? And you're customised racquet holder is just a gem I spent time cutting out 14" inch dough Balls and Vega and I've never seen it up Close and like this and how would you may get the pressing and prints that easy like I would say good job Thankyou Steven James you're sub watcher
It's pretty common for a table tennis blades to have some cut out inside handle for weight balance. It shifts the balance towards the head, which give you more power and clearer feeling, but it's not for everyone because it makes entire raquet to feel heavier.
Yeah, but where did the plates for these rackets come from? the main thing of the blade is just there already. I mean, even 0.05 mm of any layer changes the characteristics of the blade significantly. I wold love to see how it’s done, and not just forming the plate and handle.
sarap cguro magkaroon ng ganyang racket pero gsto k monkey ang tatak. merry Christmas po
i watched from start to finish, the amount of work and dedication is absolute . love it!
The song is so good that it almost made me sleep and your artwork and blade mastery is extraordinary
at 11:44 nice pistol racket :)
@Hasan Soliyev it's about 40 usd I think
Just , it was good experience for me and i enjoyed the beauty and good work .
I am not professional player but i lik to play this
sport .
God bless you, you are great artist .
And great choice of music, beautiful
Case is such a good touch. Makes me want one.
화이팅입니다 멀리서 응원합니다 ~^^*
Honestly this looks beautiful
The racquet look very solid and with good rebound control and speed. How much are you guys selling this one specifically?
O resultado é ESPETACULAR, parabéns...
Such a beautiful product and process.
Wow, imagine making such a beautiful racket and then playing table tennis like that ;P
I imagine that the situation must be similar to yours, with a lot of skill (throughout your life) in your fingers to write sarcasm but later in bed they became useless to satisfy your partners.
The tasteful thickness of it, oh my god it even has decals
This man is an artist
I need one like this racket 😭
It is not one person. At least one is right-handed and one is left-nanded.
Lovely...i love playing table tennis.
super satisfying. & it makes me appreciate my rackets a whole lot more! thanks for sharing!
What price is it for this piece of art . Never saw a wood casing , very unique.
Lasers always amaze me. So effortlessly burn the handle design.
Es una marca de raquetas reconocida? Yo solo conozco Butterfly
This hand-made racket feels great.
You can't give up now, it's just a season. Whatever you are going through. No matter how hard it is... It will pass. Better days are coming ahead ❤️
That a huge comment
Thank you 🙏
thanks for video,great job !
Going in progress I love the exertion 👍👍👏👏🥹
Wao, it's amazing!!!! I want one.
와우..수제 라켓이라
탐나네요.
제발 너무 비싸지만 않기를..ㅠ
가격 잠깐봤는데 미쳤는데요...
@@쓸대없는디테일얼마길래요?
Very decorative, and a lot of skilled work. Would a professional use such a bat in his work though? That handle must be uncomfortable over time.
Very good production video.
Чудове відео і робота! Цікаво, а скільки коштує така ракетка???
Он их продаёт корейцам в Корее, вряд ли вам нужно знать цену)
I trained as a toolmaker a long time ago ... your milling cutters need sharpening :-D (And a slightly higher cutting speed aka more RPM would probably help too). Apart from that: nice video
Hermoso trabajo ❤
This is a super blazing fast blade!
Nicely made. . The router bit that cut the handle could have a round shape to it, save shaping it on the sanding belt. Also I noticed that where the bit started and stopped when cutting out the bat it left an indentation, this could be avoided by starting the cut at the base of the handle on the corner. Phew that laser was super quick, there’s me thinking that was carved by hand : ) but I did notice a tiny chunk of wood had splintered off - quality control ? ?. Looks like the box that the bat is put in is more expensive to make than the bat itself. Obviously the bats are more for show as a serious player would apply their own choice of rubbers.
P E A C E. : )
Man came in and critiqued one of the finest and most high grade table tennis racket artisans in the world, as if he was saying to his local baker that he left the croissants for too long in the oven🤣😂
@@nicolasgoossens I won’t justify my comments with my life long experience, knowledge and qualifications. Anyone with the understanding of working with wood will know exactly what I have said and advised in my comment is correct and fair. As regards the local baker remark, I worked in a baker’s shop from the age of 10 to 15, so yes, I would notice if something had been baked for too long.
bro he don't speak english lmaooo
@@Sarcastitonea Did you mean to say ‘he *doesn’t* speak English’ ?
@@FUNKINETIK no serious table tennis player uses these blades or rubbers. u were on point with your criticisms. hats off to the business owner anyway, gotta make a living out there somehow. im sure that the rackets you can find in a western sporting goods store are going to be less playable than these.
가지고 싶은 탁구체네요 .대한민국 탁구체라서 너무 좋네요
It’s a piece of art! How do I get one from you in India?
저도 국화꽃 예뻐서 소장용으로 샀는데 이렇게 유쾌하신 분이 만드셨군요 근데 탁구는 그렇게 잘 치지는 못하시는^^;;; 뭔가 언발란스한
Very nice work of art and respect it. And also informative video.
Wow! This is amazing. Beautiful work.
Great work! Where can I buy this racket? And how much is it ? Is there anyone help me
🙏🏻🥂 awesome... And interesting rubber choice
Which side is used for defending
The red side or black side?
Bravo, me gustó el diseño y la línea de tiempo de fabricación. Por favor puede comentarnos que maderas utilizas?
XIOM/ VEGA made germany*
Great video. At 11:26 wooden cases are shown. Please make a video of how you make them.
BRAVO...Je ne verrais plus ma raquette de la même façon maintenant!
I love that holder with Korea Gimchi color.
Beautiful Paddle built by a Craftsman!
🤯Это прекрасно! It's beautiful 100000000000 like
Здравствуйте! Очень замечательная работа с деревом! Но!! Почему нет лака на ручке, или финальной обработки?! Ещё 1 замечание. Не доверяйте заводскому клею на накладках, в нем есть пропуски, или неравномерность. Со временем образуются мертвые точки, пузырьки, или накладка отходит. Добавьте своего клея, рекомендуемого заводом изготовителем накладки. (Сейчас это на водной основе) Так ракетка прослужит дольше, и ваше качество будет радовать владельца много дней или лет. :)
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻 felicitaciones un verdadero arte la fabricación de las raquetas
Is the rubber pre-glued?😮
Olá, i"am brazil. Vc vende essas raquetes que você faz? Se sim quanto que é? Pode envia-lá para mim quando for comprar. Sou novo e acabei de me inscrever e deixar like.
How much does it cost ? Thanks,
Omg never seen Vega Europe with factory glue layer. Is this Korean version?
Wow iwant 1 but i dony have money to buy a table tennis racket like that..
what kind of rubbers are these where you don't need to apply glue?
Applying glue is necessary when attaching rubbers to a blade but i know 2 rubbers that have factory-applied glue layers; DHS Hurricane 3 NEO and Yinhe Big Dipper
You're welcome 😊
고집통 저도 이거 쓰구 있는데 손맛이 죽임니다~
라켓이 휠 것 같은데요
SUPPER😘😘😘😘👍👍👍👍👍
why silkscreen the wood only to cover it up with the rubber?
عمل حرفي متقن وجميل تسلم الأيادي التي صنعت هذاالمضرب أخبرنا عن نوع الخشب المصنع من المضرب وشكرالكم🌹🤲🌹
Piece of beautiful art
Dear Sir (GozipTong) ??? You're name -
I was touched watching you're video
On how you're bats are finely cut in articulate designs and artistic behaviour
It was beautiful and a precious moment
I would like to know 10:45s there was a
Dense cut out in the handles I didn't get or understand that ? And you're customised racquet holder is just a gem
I spent time cutting out 14" inch dough
Balls and Vega and I've never seen it up
Close and like this and how would you may get the pressing and prints that easy like I would say good job
Thankyou Steven James you're sub watcher
It's pretty common for a table tennis blades to have some cut out inside handle for weight balance. It shifts the balance towards the head, which give you more power and clearer feeling, but it's not for everyone because it makes entire raquet to feel heavier.
단위 공정마다 표준화 문제점이 많군요
목재 온습도 관리 환경 (여름철과 겨울철 제조 lot 편차)
접합제 도포두께(헤라 도포)
합지 프레스 압력(공압이나 유압 아닌 작업자의 감각 의존)
그립 메뉴얼 가공(그립감 편차)
우리나라는 이빨 명인, 이빨 감독들이 너무 많아.... 만드는 것 없고 중명하지 못 하면 조용히 좀 있으시길....
어휴 B S
@@nocturn936 닛타쿠 라켓 제작공정 한번만 보고와봐..
@@nocturn936 단위공정의 표준화는 제조업의 기본 중 기본인데 명인까지의 문제도 아님
Where we can buy this racket?
Alucinante 😊😊😊😊😊😊😊.
Nice..where i can buy it?
Are these ittf approved?
Men şunaka raketka goremyok malades ❤❤❤
Tradu text folosind camera foto
I like it with dedication and a lot of attention to details.❤ A lot of work.😇 What is the price of this palette?🤩
외길로 라켓 만드시는 장인이 있어 감사합니다. 탁구인들도 국산품 사용합시다
옛날에 한때 많이 썼죠.지금은 버터사 하리모토 써요.~요즘에도 가끔 라켓 홍보문자 오네요.
What pen paint do you use?
Amazing 👍👍👍
Amazing what a man with just an iced americano can do.
Wow....
spirit of korean
영상잘보고갑니다^^
멋지네요~
Where can i buy my own design like this and how much will it cost? I love it.
Espetacular!!!! 👏👏👏👏🇧🇷🇧🇷🇧🇷🇧🇷
Ах, какая красота!!! Какое тонкое искусство!!! What is rubbers? ( Xiom Vega europe?)
Si, los cauchos son Xiom Vega Europa con tecnología de pegado fácil iSwitch
Yeah, but where did the plates for these rackets come from? the main thing of the blade is just there already. I mean, even 0.05 mm of any layer changes the characteristics of the blade significantly. I wold love to see how it’s done, and not just forming the plate and handle.
Can I make an order?Do you sell your products on the market? If yes,how much for one? 5 pliers or 7 off pliers?
everything looks so meticulous expect for the way the did that red and black paint. I chuckled a bit.
very cool, i want one
beauty at its finest
vợt bóng bàn này chắc để lưu niệm thôi ..
it doesn't have any website?
I need a penhold racket like that
Dat lijkt mij een fantastisch betje.
Ik denk ook dat daar een leuk prijskaartje aan hangt!!!
very nice, so i want to buy it.
estupendo trabajo saludos
Super cool video
I want to buy ！How can I do？
我的球拍也是自己动手制作 哈😂😂 木片的厚度与胶水性能很讲究 😂😂😂
Wonderful
이걸 어디서 살수있나요?
Awesome!
How can i buy from this maker?
Can it plays on its own ?
To be honest I don’t care much for the blade but the case is beautiful
Доброго дня. Я из Якутии. А сколько стоит ракетка, с чихом?.
Такая красота, на урааа! Здорова!