I would die to have a neighbor like him!! My asshole neighbor was telling me to slow down at 17mph so now I go by at 22!! Stupid jackass even changed the speed limit sign from 25-15! I think he did it him self actually I thought we all had to be notified o well either way IDGAF!
Sam is a stone cold killer. The man is the last to react, but the pure joy in his smile and the instinct to just give a round of applause cause it was that fun for him.
Love seeing all the comments and love for Sam! You guys seriously are the best for hiring him! The smiles and excitement he gets is so humbling! He is a one of a kind gem!
I’m excited as hell to finally see a built coyote on the channel as a Ford fan. I’ve tried to explain to the Ls guys how it makes power. About time cleet joined the dark side. Let’s get that Godzilla update too
Love him! He is genuinely my highlight of this channel. Also I'm a Chevy man myself but this Ford is prettier than my my best friends ex wife. Cheers to the motor heads and the cowboys. 2023 is up to you. Make it a year to remember. ✌️🤠🍺
Check your boost source. Fairly common to have a negative taper when using the compressor housing as the boost source but measuring boost in the manifold. You lose pressure through the charge pipes and intercooler. Change source to manifold and you’ll be all set (after the injector change)
I agree, If that hose that goes into the turbo compressor housing is for the boost sensor than you are measuring before the compression process is complete. Your measurement is in the middle of a divergent duct (expansion chamber) that is designed to create mass airflow and avoid compressor stall. Turbos, Turbines, Jets, Rockets and Wings 101 is convergent and divergent ducts.
Ding...ding...ding. Always use a boost source from the manifold. Boost control using the compressor housing is always erratic and more difficult to control.
Definitely this. The directions for the boost leash controller state to use anywhere from the compressor housing to before the throttle body but closer to the throttle body is best for MAP sensor reference. I have mine tapped into the charge pipe pre throttle body.
We need to know if Sam has anything left on his bucket list… If he does his fan base would make it happen overnight, I’d contribute in a heartbeat. Love that guy.
These trucks are so awesome. I rode in a whipple awd single cab truck like this. Stick engine, transmission and everything else, and wow it was ridiculous. I am pretty sure it went 9’s with just a bolt on blower and a tune! And the guy drove it everywhere!
First gen Viper had 400hp and people thought it was insane. You can now get minivans that have 300hp stock. Pretty different 0-60 times 4.5 vs 6.5 but it's still nuts.
hopefully they let him run it on drag and drives and other events. They also have the fox coming but any ford guy knows they need to scrap the idea of the godzilla and go with a coyote. No heads no cams no pistons no rods no opening a coyote and you can make up to 1200whp and s550s have ran 7s and f150s run 8s in the 1/4. All coyote needs is boost and fuel. throw that in a fox and you have easy 7s built they can make up to 1500 to 2000hp on factory block. LS and godzilla being old school pushrod you need heads cam pistons rods then boost and fuel to make what a stock sealed coyote makes. oh and its doing that on factory coputer no holley needed
@Car Culture Nation its called they're doing something different ppl get tired of the same cookie cutter builds. Not everything u build is about being the fastest lmfao I'm sure they'd be happy with a 9 sec 8.50 car with the godzilla motor
@@Mateo5.0 also I think it's kind of funny that you misinterpreted my statement praising the Godzilla race car build as a knock against the coyote. Here's some life advice your parents should have given you, it is okay to like two things at once. I can love the performance of the coyote, and the potential of the Godzilla at the same time.
Sam is such a good dude. Clete, thanks so much for always having him on your channel. We can tell you care a lot for him he kind of gives me some Old Neighbor vibes. They both were just super nice guys You can just tell how genuine they are /were. R.I.P. to Neighbor.
Put a line lock on the front brakes and you won't have to hold the brakes. "If it really made 893 I'm selling every LS in the shop.." We're waiting for you to be a man of your word Cleetus.
It could be Your turbo bearing is loose. Turbine wheel starts to shake and you loose boost from it vibrating against the bearing walls. And that’s we’re the smoke is coming from also. Around the loose bearing seal, or the bearing itself. Depends on what bearing type.
Definitely spiking due to wastegate positioning or size! You could even try something as simple as making a shorter screamer pipe off the wastegate as iv seen boost control issues due to overly long screamer!
You guys are insane the wheels look great and you almost lost me when you said you want to get rid of the 10 speed. You have a ton of racecars we would love for you to keep the drive train stock on this one. Come on Cleeter!
I like the MIDNIGHT PERFORMANCE shoutout!!!! Manuel and his team have those coyotes on point. Let's get ONDAGAS, MIDNIGHT PERFORMANCE at the freedom factory.
Being a Ford technician myself, I must say this is one bad ass truck and combo. I cuss these trucks daily, mainly F250 and 350s, but seeing this set up really gives me hope about the V8 future and horsepower wars. I don't see how dodge and GM can see this video and think, by God boys we need to make a truck like this that customers can modify and tune.
Man I think those wheels look killer on this truck, both this one and the giveaway truck look beautiful the way they are set up.....especially when the new one is dropped more
i was thinking this as well. also thought it could be the positioning of the wastegate doesnt allow it to react fast enough/bleed boost fast enough so it spikes then dips heavy to try and stabilize
So glad Sam joined you guys. He's a fan favorite, amazingly hard worker and just a genuinely good guy. Of there is anything yet to be ticked off his Bucket List, MAKE IT HAPPEN.
Man i want one of these so bad! Sam has the 150 ready to go! I wish i could own this beast. Shout out from a fellow Floridian! Good luck hope the wife and little one are doing great.
Personally I like the wheels and the whole stance of the truck. Maybe some dual exhaust pipes that come out before the tires like the lightning would be sweet. Aftermarket taillights and headlights. I'm partial to alpharex
AWD burnouts that last over 100 feet are pretty solid...
Cleetus!!!!!!
Hell yeah brother!!!!
Hell yeah!! Love the content. You inspired me to be a mechanic.
Nice
George needs my LS2 SAAB 97X AWD to replace Rocky!
I don’t think Sam is human.
He is a machine sent from another dimension to polish everything it sees.
It’s the man!
“It’s the man..” I get cyborg jokes
The wicked fact is that he likes polishing cars, even tho the fella has alot of knowledge working on plane engines, etc etc.
Dude is a saint, protect uncle Sam at all costs!
@@fast97z24they had to lay some ground rules for Sam’s own safety otherwise he will try to polish the block while it’s in the dyno. 😂.
Having Sam around is the reason why you can have nice things
It is physically impossible to not love Sam, the smile on his face when the truck launches is priceless. Sam represents the best in Humanity!!
I love the dynamic that Sam brings to the team almost as much as I love the smile he has when he's riding along for the 1000 HP AWD burnouts
Yeah Sam is tha man!
Is it just me, or does Mr Sam look like he could be BoostedBoi Kyle's dad?
Sam's smile is everything.....thank you guys for not making this guy rot on his porch .....when I get old I need some friends like u guys lol
Sam got 10 years younger on that launch! I think he found the fountain of youth. Burnouts and hard launches make ya younger! Way to go Sam!
Jason Currie-Olson - Yeah Buddy!! 10 years younger...no sht?? Man, what I wouldn't give to be back in my 70s and know what I know now!!!
I would die to have a neighbor like him!! My asshole neighbor was telling me to slow down at 17mph so now I go by at 22!! Stupid jackass even changed the speed limit sign from 25-15! I think he did it him self actually I thought we all had to be notified o well either way IDGAF!
Sam is a stone cold killer. The man is the last to react, but the pure joy in his smile and the instinct to just give a round of applause cause it was that fun for him.
He makes me smile, he is so free and just livin life and enjoying every day. Got to learn to keep my attitude in shape like him!
Love seeing all the comments and love for Sam! You guys seriously are the best for hiring him! The smiles and excitement he gets is so humbling! He is a one of a kind gem!
He's not a paid employee. Remember that. He just does it for the Love.
@@lpe655 He got the Traxxas Christmas gift.
He's also no longer an employee - more a family member now.
@Garett I would agree. I should have went further and said that but it's what I was emplying when I said he's not paid.
@@lpe655 I thought Cleeter mentioned that he was on staff.
@@schwags1969 i think the opposite that he didn't want pay.
😂😂😂😂😂 Cleetus throwing her in park while she’s moving and then says don’t worry about it. This is what keeps us watching.
Because we all do stuff like that from time to time! Nice to see someone who doesn't edit it out.
🤣🤣🤣🤣 ooooooooo lmaoo
My Escape can be put in "park" while driving and restart the engine, had a transmission problem a few months back and had to do it.
Right after saying them 10 speeds aint cheap 😂😂😂
Thats why you watch? Jeez
Seeing the pride Sam takes in his work warms my heart
Sam is legendary! Big thumbs up for cutting to the chase and having Jon Lund continue to tune for you.
Sam is loving life!
I’m excited as hell to finally see a built coyote on the channel as a Ford fan. I’ve tried to explain to the Ls guys how it makes power. About time cleet joined the dark side. Let’s get that Godzilla update too
The smile on Sam’s face during the first AWD burnout. You can just tell he’s living his best life being apart of the crew
I was just looking to see if someone brought up his smile while doing burnouts, gotta keep him smiling!
Thanks Sam, for all that you bring!
99ssss😉
And his reaction to that first launch was so nonchalant when Cletus looked like they were about to die lmao
Love him! He is genuinely my highlight of this channel. Also I'm a Chevy man myself but this Ford is prettier than my my best friends ex wife. Cheers to the motor heads and the cowboys. 2023 is up to you. Make it a year to remember. ✌️🤠🍺
Sam is honestly the best addition to your channel. He is gold!
Check your boost source. Fairly common to have a negative taper when using the compressor housing as the boost source but measuring boost in the manifold. You lose pressure through the charge pipes and intercooler.
Change source to manifold and you’ll be all set (after the injector change)
I agree, If that hose that goes into the turbo compressor housing is for the boost sensor than you are measuring before the compression process is complete. Your measurement is in the middle of a divergent duct (expansion chamber) that is designed to create mass airflow and avoid compressor stall. Turbos, Turbines, Jets, Rockets and Wings 101 is convergent and divergent ducts.
Ding...ding...ding. Always use a boost source from the manifold. Boost control using the compressor housing is always erratic and more difficult to control.
Solid...
You lot sound smart so ima agree
Definitely this. The directions for the boost leash controller state to use anywhere from the compressor housing to before the throttle body but closer to the throttle body is best for MAP sensor reference. I have mine tapped into the charge pipe pre throttle body.
We need to know if Sam has anything left on his bucket list…
If he does his fan base would make it happen overnight, I’d contribute in a heartbeat.
Love that guy.
Everyday with the crew is a bucket list for him. Hoping over the drag and drives he gets to race something semi fast. Sams just living his best life.
@@H3110NUamen brother
I know he’s looking for an Art Morrison ‘55-‘57 chassis… if anyone knows someone who has one for sale…
Love this idea
He really is the best. I think he just wants us to buy his spray wax, I'm sure Cleeter gets him a decent kickback
Sam is a real one, didnt even flinch, the faster and harder the truck pulled the bigger the smile on his face! I love to see it!
finally about time midnight and lund get the recognition they deserve! great guys and make some badass f150's and other coyote powered cars.
It's awesome seeing cleetus finally realize he's been sleeping on coyotes this whole time
Check out Engine Labs article on brake mean effective pressure.
Coyote is the king
He has one for neighbor before that gt500 came around...
preach
Not a stock coyotes but still not a slouch
they are nice but a 4.6 has so much more potential, specifically a teksid block paired with 4 valve heads. 3000hp @10,000rpm isnt unheard of.
These trucks are so awesome. I rode in a whipple awd single cab truck like this. Stick engine, transmission and everything else, and wow it was ridiculous. I am pretty sure it went 9’s with just a bolt on blower and a tune! And the guy drove it everywhere!
Sam's job is like pushing water uphill.
Legend
Or herding cats
@@billowens695 LMAO
Sisyphean task !
Chump!
You know Sam been in some fast and powerful vehicles when a 1000+ hp truck doesn't phase him and just smiles
Yeah compare that to when Kyle gave him a ride in the NSX.
Look at George when he was in the truck when they first got it that boy looks scared🤣
The guy is a legend in his own lifetime. Damn, I'm so happy they got Sam on the show!
Was thinking the same thing I was like this man isn’t fazed
fighter jets
The work truck is nasty! Yote is putting down some power! Sam's smile says it all during the AWD burnouts.
It’s so weird how normalized 1000whp has become. Early 2000’s I was making 380whp and everyone thought I was a madman
I was just gonna say the same. I rebuilt a 351 cleveland and pretty sure it was around 300hp. That was a little spicy in '98.
And to think some of these cars that are still street legal makin well over 2000hp. Hell you can get a stock Honda civic with over 300 these days
What's crazy is that basically everything that's not a 4cyl these days makes 300hp..
First gen Viper had 400hp and people thought it was insane. You can now get minivans that have 300hp stock. Pretty different 0-60 times 4.5 vs 6.5 but it's still nuts.
@@PureCountryof91 Half of the four-bangers are making 300+
Sam’s smile lets you know how much power it really has
99sssss. 😉
99sssss😉
Sam was one of the best additions to the crew nothing but good reactions and clean vehicles with him around
I love how calm Sam is on that launch. You can tell he's gone fast before.
you just know he hot rodded some shit back in the day lol
@@onehandclapping_5356 what you mean some ? Sam invented the hot rod 😂
Hes gone fast on lap belts and leaf springs. This shit feels chill AF for him 😂
Man Sam is a legend. Sits there cool as a cucumber whilst Cleet is unleashing a 1000hp awd launch..😂 Would buy the guy a beer in a heartbeat. 👍🏻
He'd probably prefer a Coke.
It’s nice to see a real tuner. Dr. Tune em all is not qualified to tune Cleetus’s level of performance.
I'd love to sit down for a drink with sam so we could talk shit for a while, I bet he's got some awesome stories
God bless Mr Sam. Retiree hanging out with the young folks having twice as much fun as everyone else.
Tye wants that truck so bad. He’s the Ford man on the crew.
You could see him admiring everything while everyone’s talking. Lol
He's got a turbo coyote ranger that's just about done if not done already
hopefully they let him run it on drag and drives and other events. They also have the fox coming but any ford guy knows they need to scrap the idea of the godzilla and go with a coyote. No heads no cams no pistons no rods no opening a coyote and you can make up to 1200whp and s550s have ran 7s and f150s run 8s in the 1/4. All coyote needs is boost and fuel. throw that in a fox and you have easy 7s built they can make up to 1500 to 2000hp on factory block. LS and godzilla being old school pushrod you need heads cam pistons rods then boost and fuel to make what a stock sealed coyote makes. oh and its doing that on factory coputer no holley needed
@Car Culture Nation its called they're doing something different ppl get tired of the same cookie cutter builds. Not everything u build is about being the fastest lmfao I'm sure they'd be happy with a 9 sec 8.50 car with the godzilla motor
Is he the one with the 3V mustang? I see it at the shop in the videos all the time
Sam loves being with you guys he’s just one of the boys
John Lund is about to become a regular on the channel. great work my guy
Glad to see Cletus becoming a ford guy! 💪🏼😎
Just matter of time, as soon as that twin turbo 7.3 Fox is done, he'll drive it once and sell off all of his Chitrolet stock 😂
The 7.3 is a big heavy pos and no matter what you do too it, it will never be able to perform with a sleeved coyote on boost!
@@Mateo5.0 ok, what's your evidence?
@@Mateo5.0 also I think it's kind of funny that you misinterpreted my statement praising the Godzilla race car build as a knock against the coyote. Here's some life advice your parents should have given you, it is okay to like two things at once. I can love the performance of the coyote, and the potential of the Godzilla at the same time.
@Eddy SVT *coyote guy
You guys are adding years to Sam’s life.
99ssss😉
Sam isn't even fazed. Dude is reliving his child hood... props to him
Sam is such a good dude. Clete, thanks so much for always having him on your channel. We can tell you care a lot for him he kind of gives me some Old Neighbor vibes. They both were just super nice guys You can just tell how genuine they are /were. R.I.P. to Neighbor.
I love how you've shifted from mostly Chevy to also enjoying your Fords. Love your channel. I've been loving the R/C content too.
Wow Jon Jr making a house call? Thats a damn honor to be at his presence!!!!! Best of the best
Put a line lock on the front brakes and you won't have to hold the brakes. "If it really made 893 I'm selling every LS in the shop.." We're waiting for you to be a man of your word Cleetus.
Comment needs to be the most liked one
Sam needs something that makes BIG power
C'mon Cleet! Let's put something together for Mr. Sam!
He said he doesn't want to go that fast in past interviews.
Like a Stock Marauder?
@@androiduberalles You can shred tires at a low rate of speed. Four wheel tire pops from Mr. Sam please.
Sam has his own builds. He has a huge shop.
It could be Your turbo bearing is loose. Turbine wheel starts to shake and you loose boost from it vibrating against the bearing walls. And that’s we’re the smoke is coming from also. Around the loose bearing seal, or the bearing itself. Depends on what bearing type.
that thing is a s480? could he be running out of turbo?
It's a brand new turbo
@@boostleakboys4387 i think its the same turbo from the stock engine he blew up
All it takes is one good hit with a boost leak to smoke a turbo…
could use a restrictor too, depends on a lot
Fantastic results and Lund with the Warrior Poet hat!
Sam's smile and laughter after the launch burn outs was awesome!
13:10 Sam is so calm, cool, and collected. He's enjoying the ride!
Good move dabbling in the Coyote platform. Will definitely attract more diehard Ford fans to your channel!
cleeter witnessing the true power of a properly built and boosted 5.0 Coyote is true bliss
Mopar all the way regardless 😊
@@MoparMafia5.7 god forbid you admit the competition can make something good once in a while? Lmao
@@ice44567 Lmaoo rarely
@@MoparMafia5.7 🤡🤡🤡
Unfortunately the limitations to those 5.0 yotes can’t produce much more than that. Would be nice though to see a yote with over 1800
Always a joy to see the smile on Sam's face when making a pull.
It just gets bigger as the MPH increases.
Beautiful truck brother!!
I love Sam for telling it like it is lmao. "Yeah them wheels gotta go"
“them wheels are not too sharp” 😂😂😂
I thought they look pretty cool
needs a set of aero stock car rims lmfaoo
That smile on Sam's face on that pull was great. That man is all about fun and fast!
Man that’s crazy power
I’m so glad I met sam and you guys cleetus, watching these videos just makes it hit different
Came for the Dyno session stayed for Sams Reaction and awesomeness
He needs to throw down a welding blanket under the vehicles when on the dyno
coyotes are my favorite motor. They can make so much stock with a whipple, its insane.
As a former detailer on anything from the bosses truck to his jets and planes, I wish I was still able to get around half as good as Sam does.
Definitely spiking due to wastegate positioning or size! You could even try something as simple as making a shorter screamer pipe off the wastegate as iv seen boost control issues due to overly long screamer!
Can't believe you got Jon f*ckin Lund to come in tune in person lol holy hell that's awesome!!
You guys are insane the wheels look great and you almost lost me when you said you want to get rid of the 10 speed. You have a ton of racecars we would love for you to keep the drive train stock on this one. Come on Cleeter!
This is the first time in my life I’ve seen/heard a 1,000hp vehicle not be OBNOXIOUSLY loud with exhaust noise. Nice!
The wheels look awesome for this truck. A stock coyote with a turbo/supercharger is no slouch. Loved my stock 5.0 2012 f150 4x4 regular cab.
Love seeing that absolute child like smile on sams face. Love how you guys take care of him and let him help out just love seeing him in every video❤❤
What you talkin' bout Willis ?? HE lets them hand with him !!
Nice to see Cleetus and Lund get together. Good things to come!!
Finally into the coyotes!!! My 1200hp has lived a hard 5 years and doesn’t skip a beat. Welcome to reliability 😂
I like the MIDNIGHT PERFORMANCE shoutout!!!! Manuel and his team have those coyotes on point. Let's get ONDAGAS, MIDNIGHT PERFORMANCE at the freedom factory.
The smile and excitement on Sam's face for the burnout run was the best
Being a Ford technician myself, I must say this is one bad ass truck and combo. I cuss these trucks daily, mainly F250 and 350s, but seeing this set up really gives me hope about the V8 future and horsepower wars. I don't see how dodge and GM can see this video and think, by God boys we need to make a truck like this that customers can modify and tune.
I freaking love Sam. He's a national treasure. He made that truck look awesome!
I love Sam’s face on the launch. Just one big smile. 😂
Plus the fact he wasn’t concerned about a seat belt on the first rip, you know he’s been around some fast cars in his day lol
Dude I love the Yote content!! Nice to see
The smile growing in Sams face on the first pull was so fun to see!!
Thanks for telling Sam to put on his seatbelt we love that guy.
You Go Sam! That wax is cutting through the air adding big time Horsepower! J
Garret becoming a Ford boy lol. And love seeing Sam so happy
That Coyote is INSANE. I mean, LS’s are cheap and plentiful, but nothing beats that dual cam air flow.
I think those rims powder coated glossy black would look CLEAN!!! On that f150
i love how cleetus always sleeps on how potent those coyote powerplants really are
He is waking up quickly
It’s just funny that it’ll take a RUclips guy like cleetus to open the flood gates
@@Baughlin its gonna fuck the game up fr
How 1000 wheel on a 10k motor "sleeping" lol. This thing requires an insane amount of money spent to make that power
@@uglymechanics6599 gen 3 coyotes sealed runnin 1000 hp all day
I'm a black wheel guy, but I think those silver wheels look pretty good on that truck.
Awesome , Thanks CM & Friends 1044 😊
Man I think those wheels look killer on this truck, both this one and the giveaway truck look beautiful the way they are set up.....especially when the new one is dropped more
Dude y'all got Lund Jr. himself to come out? Legendary!
Cleet getting into them dual cam engines now, what out!
That Coyote outflow the wastegate IMO. Awesome Video as usual and make me wamt my F150 Boosted even more. Thanks guys.
i was thinking this as well. also thought it could be the positioning of the wastegate doesnt allow it to react fast enough/bleed boost fast enough so it spikes then dips heavy to try and stabilize
Sam is truly a gem!
The Lund family are super talented Calibrators. That truck is in such good hands. It was nice to see a little HP Tuners on that computer.
Hey cleet
That's the picture of the giveaway truck I won two days ago from you
Thank you so much
That silly 10 speed is what makes these so great
It keeps the engine at Peak horsepower
..and may be the weakest link in the chain after trying to put it in park while still rolling on the dyno lol
6r80 is way better
@@tripprogers4814 Just puts a little shine on the parking pawl and case.
@@--_DJ_-- shining bright like a diamond as Rihanna would sing
i actually like the wheels. the silver on silver. the fitment is really clean. its not a bad look. especially if they can perform
Geez! that is one wicked Ford pickup. That’ll surprise a few at the stoplights.👍👍🇨🇦
Sam needs to be present on every test drive .
So glad Sam joined you guys.
He's a fan favorite, amazingly hard worker and just a genuinely good guy.
Of there is anything yet to be ticked off his Bucket List, MAKE IT HAPPEN.
Man i want one of these so bad! Sam has the 150 ready to go! I wish i could own this beast. Shout out from a fellow Floridian! Good luck hope the wife and little one are doing great.
Your content is therapeutic man. Thank you!
Oh yeah I’m definitely get me one💪🏼🇺🇸
Been a fan since you stole Kyle‘s vet and put the lawnmower in the back been watching it since I love your contact 🇺🇸💪🏼👊🏼 (HELL YA BROTHER🇺🇸💪🏼)
That's not Garrett
Haha the three up ride was way cool. The old boy just loved it, calm as he’s been there done that and still loving it all.
Sam is so friggen cool! That first 4wd hit, James and Cleeter are blown away and Sam's like..... I've seen bigger. 🤣😂🤣😂
Pretty cool seeing Cleetus talking to someone as tall as he is!
Not going to lie I love exactly how this truck looks right now ♥️♥️ the wheels actually fit in my opinion!
Cleet starting to see the light with the Coyotes!!
Damn I love Sam!! Always a huge smile on his face when the torque gets goin!
The smile and clap from Sam. Priceless 🇺🇸🙏🏼❤️
Personally I like the wheels and the whole stance of the truck. Maybe some dual exhaust pipes that come out before the tires like the lightning would be sweet. Aftermarket taillights and headlights. I'm partial to alpharex
The best people to watch on RUclips....Down to Earth...
Keep ON Keeping ON 💯
ALABAMA SAYS THAT........
@realcleetusmcfarland
Hey brother
What's up my friends 🤪
@realcleetusmcfarland
He'll ya brother