I just did some of these add-ons. At 9:02 the dark gray connector with 2 black pins is facing the wrong way. When added to motor, the dark gray connector should be facing to the right towards the motor with the pins facing away from you. You can see the correct orientation if you freeze the video at 9:50. Also, it is easier to install the dark gray connector with 2 pins on the beam underneath separately from the rest of the motor and then put the red axle in after.
I do love this set, but I might have to do this. I was initially worried that its juddering was my fault but upon seeing the actual designer video I know it is an artifact of the motor being so far away in terms of gears. Needs less degrees of separation. I will be doing this, I wonder perhaps if it is worth trying to have the tracks run independently so as to steer it too.
Phillip Carter The easiest way to make it run better is to get rid of the clutch gears in the back, it should be fine if you just take care while using it. Also, you can do a lot of this stuff with M motors as well, I motorized (most of) mine with just the parts from the 8043 set.
Phillip Carter "Most of" meaning that I don't have control of the lower belt or steering. I'll get to those thing if I ever buy more power functions bits.
Thanks Lord Mortigon. I'll do that. I was tempted also to have a separate gear coming off after the motor but before the bucket wheel, attached to a sort of crank so that it might be operated by hand in smaller increments for stopmotions etc. Thanks for your help :)
Justin Mainemer well I could take some pics of my model so that you see how I built it and what pieces you need, because right now I don't really have the time for unbuilding and rebuilding so it's gonna take some time
Hey guys, am I the only one who finds the lock for the lower belt (the one which delivers mined material to the dumper) pretty useless? There are 3 positions - locked / N / unlocked. I would expect that one of that position allows dumper to stay on same position while the excavator is turning around. I see no difference in locked and unlocked - in both positions the belt moves together with the whole excavator, i.e. rotates around so the dumper has to move too... I would appreciate your views, thanks.
Now are the parts you used to mount the motors included or did you have to add additional parts? cause i'm trying to find the square motor mount part from step 1 but i cannot remember the number for the life of me
Nice work, thought I am surprised you didn't add a second battery box to power the motor below the turn table, The current config can't keep turning forever.
Hi. I want to ask you where did you get remote for excavator? Did you buy something extra besides standard Bucket wheel package, and what? Regards, Milan
Love the way you somehow managed to hide most of the power functions. I love it
Dang lam gi do
A
@@trangrolan6064 iiiiiiiii8ii8uutuu
Incredible. Well done Sir.... well done.
So amazing that I want to buy it too it's so much fun
Trzymaj tak dalej a dobijesz do miljona ☆ (-:
Cool video
This MOC is impressive. And thanks for all the video instructions.
very nice mods.....can you tell me if you had A LOT of elements left over after building bag two? Many thanx!
Hi there nice conversation just one thing lego largest axle is a 12 but it does no go all the way through is there a longer axle
Another comment for the algo. Subbed.
That looks great, will have to try it on mine when I get it.
Same
You have made the best Super
K Eicher 2 y ears ago
Anyone have a Partlist with numbers? How many and which motors are needed?
the original set was OK... but with the motorization modifications you made this set is a beast! you even did it to the white truck! subbed.
idjdpdjfld8r
kdoidohd
jdldmdldufldld
udld
Dear Lego, this is what we want!
Very good!!!!
This is awesome
I just did some of these add-ons. At 9:02 the dark gray connector with 2 black pins is facing the wrong way. When added to motor, the dark gray connector should be facing to the right towards the motor with the pins facing away from you. You can see the correct orientation if you freeze the video at 9:50. Also, it is easier to install the dark gray connector with 2 pins on the beam underneath separately from the rest of the motor and then put the red axle in after.
TinkeringJohn i u jknj
42055 아직 안만들어봤는데 본체도 개조한건가요?
Nice bro
How long did you build it?
Do most of the bricks come with it or do you need to buy them?
Build da
Do you need a second XL motor or are you using the one it originally came with?
You will need a second, the one that came within is used only for rotating the constuction, as you can see at about 10:40
+Lekkerranzig ok good, cause I just happen to have a second one. I actually got it directly from Amazon
+Lekkerranzig ways
/!8$!)5(62"$8'ij jopNyennttdqdebtu,I lqWg
This is soooo sick! 😩
What length should be the axes in step 2 and 4?
Best regards for PPUNG DADDY
I just did this upgrade. The axle in step 2 is a16 and the one in step 4 is a 4.
Can someone tell me how to get all these functions and the controller then how to make the controller rc the functions
I do love this set, but I might have to do this. I was initially worried that its juddering was my fault but upon seeing the actual designer video I know it is an artifact of the motor being so far away in terms of gears. Needs less degrees of separation. I will be doing this, I wonder perhaps if it is worth trying to have the tracks run independently so as to steer it too.
Phillip Carter The easiest way to make it run better is to get rid of the clutch gears in the back, it should be fine if you just take care while using it. Also, you can do a lot of this stuff with M motors as well, I motorized (most of) mine with just the parts from the 8043 set.
Phillip Carter "Most of" meaning that I don't have control of the lower belt or steering. I'll get to those thing if I ever buy more power functions bits.
Thanks Lord Mortigon. I'll do that. I was tempted also to have a separate gear coming off after the motor but before the bucket wheel, attached to a sort of crank so that it might be operated by hand in smaller increments for stopmotions etc. Thanks for your help :)
Grumble Beard o
역시ppung dady님 저팬이에요
what a amazing lego set ,hope the lepin can be nice too
awesome just breath taking!!!
schlecht erkennbar ob man es vom Wagen anbauen muss oder nicht
Good toys for kids happy
thank you so much for the instruction, just bought the engines myself and it works so good
He only shows kinda what you need, can you give me a full parts list to do this my friend? I can send you my email address.
Justin Mainemer well I could take some pics of my model so that you see how I built it and what pieces you need, because right now I don't really have the time for unbuilding and rebuilding so it's gonna take some time
Let me know when you have the photos ill post my email address.
Hey, How did you motorise the truck?
How did you got it in advanced?
Hey guys, am I the only one who finds the lock for the lower belt (the one which delivers mined material to the dumper) pretty useless? There are 3 positions - locked / N / unlocked. I would expect that one of that position allows dumper to stay on same position while the excavator is turning around. I see no difference in locked and unlocked - in both positions the belt moves together with the whole excavator, i.e. rotates around so the dumper has to move too... I would appreciate your views, thanks.
so what exactly do I need to buy to get all the needed elements?
uh so what parts do you need to make this mod work?
뿡대디님.. 레고를 취미로 하는 학생입니다 이 키트를 어디서 구매하셨는지 알려주시면 감사하겠습니다...
ㅠㅠㅠㅠ
Asu
Luiz bola
My wheel isn't turning wel how can i silve that?
Now are the parts you used to mount the motors included or did you have to add additional parts? cause i'm trying to find the square motor mount part from step 1 but i cannot remember the number for the life of me
you have to get the parts yourself
1
2:01 the only downside is the way it rocks back and forth
Caleb Hudson sapna choudhry danc
hi how do you make the main part turn with rc .
This is my fav set I hope i get it for chistmas
still, desert eagle technic creations' moc bucket wheel is unbeaten.
Hi
What is the music at the start of this? Who is it?
It's brilliant!
wow nice
Are this electric wires in a set?
how do you make the excavator turn like a tank please contact me
Nice work, thought I am surprised you didn't add a second battery box to power the motor below the turn table, The current config can't keep turning forever.
Craig Stanton has to work
Kamal yarr
hi to you
Amazing💕😍💕😍
Hi. I want to ask you where did you get remote for excavator? Did you buy something extra besides standard Bucket wheel package, and what?
Regards,
Milan
Milan Gogić não
Bagus ni lego keren deh
Super
Hello, what camera do you use ?
wow you are so cool
Thiên Vũ Nguyễn Ngọc rr
ccvbb
👹
ist die Fernbedienung auch dabei
Please make a parts list in the description. Thanks alot!
Hey:) How long ist the black Axle in Step 2 ? 16 Studs?
I like it
what is the Instruktionen from the muldenkipper
Can you make the b model 42055 moterized
Could we get a parts list of all we need? I'm about to order!
Good
I planned to make this too rc but you were faster xD
einfach nur Geil
I'm just looking for instruction to do mine. but cant find the link can some one please link it thank you very much inadvance
Donald Bocock sorry
Nice
Cool, how to remote and motorized the little truck? can not find instruction!
hi do you give me instructions buildings mod for small white car? thank you
I have a Problem my Set doesnt drive Can anyone help my please
Wow just wow.😎😎😎😎😎⛰
"You need only some bricks"... *proceeds to show one million bricks*
You is awesome
I NEED how long the line?
실제로 이렇게 빨리 움직이나요?
hast du ales mit fernsteurung
Rate this toy
Uau ! Buen trabajo?!
How to buy this
Yes how to buy this
Ii
I just bought mine before xmas for 150€ gotta be the best 150€ I had ever spent for Lego
You can buy it in the toy store
I want to combine my mindstorms2.0 set with this set. please can anyone link me a website or youtube channel/video to help me with ideas:)
nice
I luv dat tingy
J’adore
no preso il bugger 293, FANTASTICO
what the song name 0:03
1. 3
seng apik geh
whats the music i have been trying to find it for a while
I think your old instruction videos are best instruction videos in youtube but why you dont do they like old
Ulili 😍😍😍😍😍❤❤❤❤❤😁😁😁😁😁😁😁😁😇😇😇😇😇😇😇
cool
Can you really really really really please make a tutorial
It's in the video
lol
omg facepalm...
대박
천재다
genuis
+박찬희물통파워 genius
I have that bucket wheel at home in Lego’s it’s hard to build so my dad and brother helped me
Herobrine CRAFT
where you buy the control????
It should be with it
what is pries
혹시이거 신형?
네
I was hoping to see it dig some sand .. But no :(
If you spent over 300 bucks an x amount of hours building it woulda sand be first thing you'd put threw it ?
Wow you are incredibble.
Wow amazing
Coooooool
Nice videos shoveme more
0:12 ant for scale.
Matthew Noel b
bring this man a beer
Hello🦅
Bán cho mình đi