@@anthonymroczka5213 How do you like your Lowrider st?? And what are some things that you do NOT like about it that you think could be changed for the better??
I actually like how it sticks out a little bit, gives it more “character” plus those lp6s have some light coming from the side so now you have 100percent of the light directed at the road instead of having that little bit in the fairing. It’s dope, your bikes are dope, the fact you got this channel to grow this much is 6 years is DOPE. Just killing life man, very inspirational, don’t stop block
Not hating on you guys. But I have that same set up. And you guys struggled way to hard with that bracket. It was a little hard rigging up the shade but drilling welding and painting a $200 bracket wasn’t needed lol. I tried other alternatives to this bracket but this was the best so far. Also the harness is worth getting if you can afford it. Even if your good with electrical work. I love the light. I don’t even have the high beam hooked up on mine. The light blinds people on low beam. People should keep in mind that this light is not street legal so be carful out there
Hopefully whoever watches this video at least reads the comments to know they don’t have to butcher the mount to install. I designed this mount and maybe I should’ve included instructions but it seemed really straight forward. All you had to do is turn the Baja designs horseshoe mount around 180 and it would’ve brought light even closer in than with your modifications to the bracket. I also didn’t include nuts because the lp6 comes with stainless ones. Not sure why you had to source the nuts? I also don’t recommend direct wire method. The light overloads the bcm and throws a code. I’d be concerned about the bcm turning the light off over time. I really haven’t had any complaints about the install and usually Jake from Cali Raised Moto or myself are always available to answer questions. I’m not talking shit by any means but this video is an example of what not to do and I guess it’s partially my fault for not supplying instructions. If you need a wire harness they’re available at Cali Raised Off Road.
I had a question that I haven’t seen answered and maybe it’s dumb as dog shit but I’m asking anyways If you aren’t running the Memphis shade or any fairing at all, do you need the bracket anyways or can the Baja bracket provided with the light mount to triple tree without the bracket Also the wiring harness provided by Cali Raised fixes the problem with the ECU I take it as reading your comment?
@@zacharyrosetti2563 yes, you definitely still need the bracket. You can order from cali raised off road.On their website just choose Harley Davidson for vehicle. Also purchase the wire harness. If you direct wire like in this video it will overload your bcm and throw codes and a light will come on on gauge and bcm may eventually turn light off.
@@nukestr thank you, but I have found that you do not need the bracket if you’re not running a fender just some new hardware mine fit where the original headlight was mounted with stock LP6 brackets. Harness is a must and is very easy to install do not need to remove gas tank on street Bob or low rider just gain access to battery. But thank you the wire harness is gold 👌🏽
Im amazed! Finally, someone that uses the deutsch connectors like I do. It drives me nutz to see the work some people do. You want it weatherproof? Factory look? Use deutsch!
For my OCD, I would change the turn signals to amber to match the Headlight now. The white running lights through it off to me. But over all I love your Gold zilla, Rockon.
Just moved to the Orlando area with my FXLRS with a Baja Designs LP9 and it is SO nice! Also SO many awesome comments about the light! Best headlight on the market bar none! Also I'm excited to see you around now I'm here Bro! Also TAPE THE CONNECTION BECAUSE WATER GETS IN MINE AND MY HIGH BEAM STAYS ON TILL IT DRYS!!!
I like the LP6 Pro but love the RIGID Adapt XP. either way both are bright as hell. If you are a night rider you need one of these believe you will not be disappointed!!!
Baja recommends not running both high and low beam simultaneously. Run both can damage the internal circuit board. An amp relay for both high beam and low beam are required on the Harley Davidson. These are available online as well as the wiring diagrams for those into DIY.
I installed LP-6 on mine after watching this video and gave you all a few big shout outs on my Chanel. Thank you. My question is: you all removed the Plex Audio when you installed the LP-6. I was about to order the Plex audio but first I want to know was it a fit problem? I have a 2022 LR-S with the road warrior fairing. Will both Plex audio and LP-6 fit?
Always see these and how great they are but what are the cons? I absolutely love the look but I don’t want to attract the wrong kind of attention either if you know what I mean. Thoughts?
I really love the LP6 light on the Low Rider S. I have a 2022 model with the same fairing and looking to get the LP6 light done by you guys. Think it’s possible? 🙏
Hey Fellas, Being in Cali, So. Cal to be exact do you have any resources (ppl/locations) that you know that put the same quality of craftsmanship into the bikes? Looking to start upgrading my 2018 CVO limited and wish I can find someone like you guys. Any leads would be greatly appreciated.
You guys do very good job master mechanic Chris very awesome How is your Dyno room working out that was very good job and many layers hours Over all very good work on all you do
Curious to see what you guys id for the Road Glide lights 2015+. I've seen LP6's in another video but the weight has me concerned and yeah cost as well. Thinking one level down from the LP6. Oh and what happened with the 131 turbo RG? Sounds like a blast but I'm sure I'd need to beef up the bottom end of my 131 to add the turbo. Grudgebox, chain drive...you know the normal freak out stuff. Haha.
For the people that can’t afford that duetsche connector crimper there is a cheaper alternative on amazing. Just research duetsche connector on there. It’s not nearly as efficient or professional but it’ll do in a lunch and not 300 bones lol
Just got a question not related to this video but does any know a good brand for a jacket I am getting my first bike this week and need to get all my gear just looking for some advice
Hey Block l was wondering about the moons mc headlight. Will it work for the 22 street bob? I found that the stock daymaker doesn’t work as good as I’d like. If so I’m going to order it as I just got my new road warrior fairing
you do under stand that those dont have legal low beam that's low power not a true low beam pattern. low power is meant for driving through dust, rain or snow where the spot patter is not only useless but a hindrance as it will throw light back at you.
Have u guys installed the turn signals. I bought the turn signal kit for my 2021 road glide cvo and I cannot get it to work. I’ve tried everything, the harness that it brought and even without the harness. Soldering the cables with the custom dynamic diodes and nothing. One works and when I plug the other they both stop working. Any insight ?
I installed LS1’s on my low rider. I used the custom dynamic diodes as well. I have noticed that occasionally my turn signals don’t come on. Try pull the main fuse. If that doesn’t work, start the bike, initiate a turn signal and cut the bike of. When you restart the bike, your running lights should function.
@@brocknewell1794 doesn’t work at all, I’ve tried everything. Someone said that they used a load stabilizer from custom dynamics because these lights pull too much power. Someone else said that they attached both blue cables and connected them to a 12v output on the bike. I don’t know
would love to see how that like looks on a dark road.
I have these on my truck and they are great at night. I could run these as just headlights if I wanted
I have the lp 4 on my lowrider st and its incredibly bright. Like everyone else is pissed bright lol
@@anthonymroczka5213 What if you run it in low power mode? any better or still blinding lol
@@anthonymroczka5213 How do you like your Lowrider st?? And what are some things that you do NOT like about it that you think could be changed for the better??
I was going to suggest a night time ride video myself
I actually like how it sticks out a little bit, gives it more “character” plus those lp6s have some light coming from the side so now you have 100percent of the light directed at the road instead of having that little bit in the fairing. It’s dope, your bikes are dope, the fact you got this channel to grow this much is 6 years is DOPE. Just killing life man, very inspirational, don’t stop block
Not hating on you guys. But I have that same set up. And you guys struggled way to hard with that bracket. It was a little hard rigging up the shade but drilling welding and painting a $200 bracket wasn’t needed lol. I tried other alternatives to this bracket but this was the best so far. Also the harness is worth getting if you can afford it. Even if your good with electrical work. I love the light. I don’t even have the high beam hooked up on mine. The light blinds people on low beam. People should keep in mind that this light is not street legal so be carful out there
Just a thought turn the bracket around that mounts to the light and use the original holes that were in the plate that mount to the triple trees.
Congratulations Chris. 26 years is very impressive.
Hopefully whoever watches this video at least reads the comments to know they don’t have to butcher the mount to install. I designed this mount and maybe I should’ve included instructions but it seemed really straight forward. All you had to do is turn the Baja designs horseshoe mount around 180 and it would’ve brought light even closer in than with your modifications to the bracket. I also didn’t include nuts because the lp6 comes with stainless ones. Not sure why you had to source the nuts? I also don’t recommend direct wire method. The light overloads the bcm and throws a code. I’d be concerned about the bcm turning the light off over time. I really haven’t had any complaints about the install and usually Jake from Cali Raised Moto or myself are always available to answer questions. I’m not talking shit by any means but this video is an example of what not to do and I guess it’s partially my fault for not supplying instructions. If you need a wire harness they’re available at Cali Raised Off Road.
I had a question that I haven’t seen answered and maybe it’s dumb as dog shit but I’m asking anyways
If you aren’t running the Memphis shade or any fairing at all, do you need the bracket anyways or can the Baja bracket provided with the light mount to triple tree without the bracket
Also the wiring harness provided by Cali Raised fixes the problem with the ECU I take it as reading your comment?
@@zacharyrosetti2563 yes, you definitely still need the bracket. You can order from cali raised off road.On their website just choose Harley Davidson for vehicle. Also purchase the wire harness. If you direct wire like in this video it will overload your bcm and throw codes and a light will come on on gauge and bcm may eventually turn light off.
@@nukestr thank you, but I have found that you do not need the bracket if you’re not running a fender just some new hardware mine fit where the original headlight was mounted with stock LP6 brackets. Harness is a must and is very easy to install do not need to remove gas tank on street Bob or low rider just gain access to battery.
But thank you the wire harness is gold 👌🏽
Fairing*
No fairing no bracket needed unless you like the look of the headlight sticking out a little bit
@@zacharyrosetti2563 my bad, I assumed you had a m8 lowrider s. Glad it’s all working out! 👍
It's great that you show the struggles. Some videos edit out these parts and make it look like everything just bolted yo without issues.
Im amazed! Finally, someone that uses the deutsch connectors like I do. It drives me nutz to see the work some people do. You want it weatherproof? Factory look? Use deutsch!
The headlight is so bright it turns the text black on the thumbnail 😀 great content as always 🎸🍾
For my OCD, I would change the turn signals to amber to match the Headlight now. The white running lights through it off to me. But over all I love your Gold zilla, Rockon.
That bike is gorgeous and that headlamp is amazing for it.
Just moved to the Orlando area with my FXLRS with a Baja Designs LP9 and it is SO nice! Also SO many awesome comments about the light! Best headlight on the market bar none! Also I'm excited to see you around now I'm here Bro! Also TAPE THE CONNECTION BECAUSE WATER GETS IN MINE AND MY HIGH BEAM STAYS ON TILL IT DRYS!!!
Sweet. Gonna have to see if they do a chromed out version that would fit my old Shadow... that thing is in SERIOUS need of a lighting upgrade.
I like the LP6 Pro but love the RIGID Adapt XP. either way both are bright as hell. If you are a night rider you need one of these believe you will not be disappointed!!!
Sometimes LP6 throws a code when you switch on highbeam. If this happens you need to add relays to prevent back charge.
Do you have the link to the harness you mentioned?
Baja recommends not running both high and low beam simultaneously. Run both can damage the internal circuit board. An amp relay for both high beam and low beam are required on the Harley Davidson. These are available online as well as the wiring diagrams for those into DIY.
Looks sick dude, I’ve got 6 of these on my truck. I wanna add one to my Dyna!
You should see my FZ-07 with it's LP9 pro and two S1's. It's basically dumb but I love it.
Seeing you put this on a bike is nuts lol
Would really love to see how it lights up the road but the clear lenses
Man I'm in love with that bike
So sick…. I’m for sure doing this to my bike. Can’t wait to see the upcoming vid on the ST fairing being fitted to your bike!
I installed LP-6 on mine after watching this video and gave you all a few big shout outs on my Chanel. Thank you. My question is: you all removed the Plex Audio when you installed the LP-6. I was about to order the Plex audio but first I want to know was it a fit problem? I have a 2022 LR-S with the road warrior fairing. Will both Plex audio and LP-6 fit?
Great video. Could you guys make it fit that street Bob you have in the background? Asking for myself since that’s my bike.
Pretty sweet light. Interesting choice on the yellow. I wonder how that affect your visibility whilst going down the road.
So I got the memphis shades road warrior fairing for my 05 Dyna and the headlight extension bracket sucks. Not enough adjustment
Man...Goldzilla is looking guuuuuuuud.
Hey, does Chris know where he got that Deutch Connector tool? Been wanting to start building a Deutch kit and love the look of the tool he had!
Do you have an easy way to or recommended method for aligning the headlight?
Always see these and how great they are but what are the cons? I absolutely love the look but I don’t want to attract the wrong kind of attention either if you know what I mean. Thoughts?
I really love the LP6 light on the Low Rider S. I have a 2022 model with the same fairing and looking to get the LP6 light done by you guys. Think it’s possible? 🙏
Hey Fellas, Being in Cali, So. Cal to be exact do you have any resources (ppl/locations) that you know that put the same quality of craftsmanship into the bikes? Looking to start upgrading my 2018 CVO limited and wish I can find someone like you guys. Any leads would be greatly appreciated.
You guys do very good job master mechanic Chris very awesome
How is your Dyno room working out that was very good job and many layers hours
Over all very good work on all you do
Check state and local laws. My state has regulations relating to color and brightness of headlights. Looks good
the lp6 are not "street legal" in any states in the US.
Loving the honeycomb light!
@15:03 J looks like the scene in Pulp Fiction when they open the brief case
Happy anniversary Chris. I still say you look much younger.
It's mostly your fault along with Chris that I got a 22 fxlrs. Love yall man
Wait... Did you say that you're taking the fairing off the ST to put it on your bike? So what's going on the ST?
Curious to see what you guys id for the Road Glide lights 2015+. I've seen LP6's in another video but the weight has me concerned and yeah cost as well. Thinking one level down from the LP6. Oh and what happened with the 131 turbo RG? Sounds like a blast but I'm sure I'd need to beef up the bottom end of my 131 to add the turbo. Grudgebox, chain drive...you know the normal freak out stuff. Haha.
Would love to visit the garage bro! And who knows, maybe even get my dyna tuned by Chris lol 🤷🏼♂️💪🏼❤️🙏🏼
Thanks you as always! 💪
For the people that can’t afford that duetsche connector crimper there is a cheaper alternative on amazing. Just research duetsche connector on there. It’s not nearly as efficient or professional but it’ll do in a lunch and not 300 bones lol
I’m sure someone has suggested it or you’ve thought of it but you definitely need to redo the stock tank logo in gold leaf. It’d be perfect
You could have just changed out the bolt with a more flush mount and have the nut on top. Just a thought 🤷♂️
Got your own Ark of the Covenant. Melting faces on the road.
So a amber head light? Never seen that coming at me. Looks good.
Do you need to run a relay/fuse when hooking it up like this?
Those wheels look amazing! So much better than the bronze color!
Bike looks so clean I love it 😍😍
I need those wheels in my life! Do you have a link?
Hi gang I'm haveing a stage 3 fitted to my 2014 street bob do you think it's best to go with bigger throttle body as well 👍
Just got a question not related to this video but does any know a good brand for a jacket I am getting my first bike this week and need to get all my gear just looking for some advice
Sorry to ask... Can it fit a 2021 streetbob.... Please say yes
Was wondering when you were going to jump on the LP6 bandwagon. Badass lights
You guys rock! 🤜👊 Thanks for creating cool content ✌️
Might be a stupid question but could this go on a sportster ??
I didn’t think I was gonna like it; but I actually really really like it! 🤤🤘🏼
How much for the plex audio?? I would love to get one of those!
Looks great, but that light bleeding back inside the fairing will be really annoying.
What's cool? That headlight! What's cooler? Chris sick wide glide and 26 year experience!!!!
bracket only works with fork mounted lights... ask me how i know 😁
had to make something custom for an ST
Looks sweet can't wait to see you ride it at night to see how good it works :)
I like the amount of light it puts out, but not so much the look of the light itself.
I do have the fly eye and I m real not impressed by the result. This is correct. A little better than original but really not as good as expected.
Could you tell me the part number on that crimp tool please?
I would really like the Goldzilla with Fat Bob dragbar and light.
Yo blockhead. Some white walls would look so clean man! Would make it pop more dude
Looks badass!! Way better it fits the black and gold perfect
Hey Block l was wondering about the moons mc headlight. Will it work for the 22 street bob? I found that the stock daymaker doesn’t work as good as I’d like. If so I’m going to order it as I just got my new road warrior fairing
Kruesi Originals sell a bracket for the LP6
Are we going to get an update on the cheapest Dyna build soon?
Live in Phoenix. Wish you were closer
How to solve the red code in speedometer b2137 for high voltage in high beam? Any clue
I’d take that audio system 😍 I’ve been dying to get one
The BJ LP6 is 900 bocks... it HAVE to be the best front light ever
What levers are you running?
Baddest headlight out...
what did u use for the site markers?
Now you need to go back to amber blinkers!
That bike looks so damn good
Where can I get a set of them wire crimpers ?
Not enough light xD
Time to get a lightbar too, and foglights!
Nice job ✅
Goldzilla is looking Real good!
Would that light set work on a sposter s?
Does this have a dot #? For street use
I wish they would do a yellow led headlight for my Indian Bobber
Front tyre gap issue...first words problems...remember the large gap on springer front ends...
Getting one for my ST soon. They spendy but so sexy!
Blockhead: puts on custom, gold plated wheels; leave on old 114 ci derby cover 😆
Does Florida not require DOT lights? On the west coast I don't believe you would get away with non street legal lights, but they do look good.
It's not legal. Headlamps are only allowed to be white. The light he installed would be considered for off road use only.
We run them all the time without issues so far.
you do under stand that those dont have legal low beam that's low power not a true low beam pattern. low power is meant for driving through dust, rain or snow where the spot patter is not only useless but a hindrance as it will throw light back at you.
How much for the plex audio
surprised you haven’t swapped to forward controls
Have u guys installed the turn signals. I bought the turn signal kit for my 2021 road glide cvo and I cannot get it to work. I’ve tried everything, the harness that it brought and even without the harness. Soldering the cables with the custom dynamic diodes and nothing. One works and when I plug the other they both stop working. Any insight ?
I installed LS1’s on my low rider. I used the custom dynamic diodes as well. I have noticed that occasionally my turn signals don’t come on. Try pull the main fuse. If that doesn’t work, start the bike, initiate a turn signal and cut the bike of. When you restart the bike, your running lights should function.
@@brocknewell1794 doesn’t work at all, I’ve tried everything. Someone said that they used a load stabilizer from custom dynamics because these lights pull too much power. Someone else said that they attached both blue cables and connected them to a 12v output on the bike. I don’t know
Noice! Need that for sure, just gotta convince the wife that 1600 for a headlight is worth it lol
I’ll buy the plex from ya right now boss !
Is that headlight color legal?
Hook a brother up with that plex audio system!