I am glad I found your channel. Found a little old 1/0 Senator for 7 bucks at a thrift store. Seems like it just needs a clean and lube. Also picked up some old knuckle buster to decorate a shelf. Thanks for the vids.
You are welcome. The 1/0 is the same internals as the Long Beach 6/0. The difference is in the trim package, so go ahead and do the service. Plenty of parts are available. Thanks for watching - Dennis
A great tip: using glass jars or vases with solution submerged in the basket water is a great way to keep parts organized and is easy to clean up afterwards so you don’t have to clean the machine every cycle. The ultrasonics go through glass.
I work in the Dental Laboratory field and we have ours partially filled with distilled water and than place glass or plastic containers filled with whatever cleaning solution at a slighter higher level than the water so that container stays on the bottom. This of course would be for smaller parts but the water only needs to be changed periodically and saves money spent on cleaning solutions because you can use small containers for small parts.
Another great product is a high pressure steam cleaner with a hand held trigger. This cleans everything really quick and than the water can be blown off with high pressure air.
Another great product is a high pressure steam cleaner with a hand held trigger. This cleans everything really quickly and than the water can be blown off with high pressure air.
Is the a commercial product or is th steam cleaner available for the home shop? Sounds like a good alternative if it is easy to use, compact and reasonably priced. - Dennis
That ultrasonic cleaner does a great job. Thanks for the demonstration. Dennis, you probably already know not to use Simple Green on painted metal parts in an ultrasonic cleaner. They'll fade or it'll even make the paint fall off. Dawn dishwashing detergent and water will do a good job on painted parts.
@@2ndChanceTackle Dennis, you'll be ok using diluted Simple Green on painted metal parts for about 4 minutes at the max in a u.s. cleaner. I don't have an ultrasonic, but will occasionally soak and scrub painted metal parts in Simple Green just long enough to knock off the grime that WD-40 misses, then rinse everything with water then let it dry.
I use my ultrasonic more than I ever thought I would. My father is a dentist so I've got one of his old units. Whether it's fishing reels, small motor parts, tools, anything. I also use simple green. I tend to go a hair stronger but that is because I'm consistently adding a bit of water. One thing is, try preheating it. Get it hot and then start.
I bought one of these and it works great. I am concerned about putting the plate with a bearing into the cleaner as I'm concerned it would flush the lubrication out of the bearing. A dab of grease on the outside afterward does not seem adequate. Thanks
Thanks for sharing. There just isn't that muck lube in the bearing, but it can be removed if you prefer to leave it off when using the cleaner - Dennis
Your choice. I prefer oil, but that evaporates quicker than grease, o you need to be committed to frequent service. If that is not the case, then grease is a better alternative. I usually use the dab of grease on customer reels as they can go quite some time between servicing - Dennis
Thanks for your answers. I'm learning as I go. Here's a tip for you as you struggle with those little screws down inside. A dob of grease on the tip of your screwdriver will make the screw stick to the tip and you can reach right in with the screwdriver.
I use a 4g commercial grade ultrasonic cleaner and the solution I use is 1g of Simple Green Aviation cleaner (safe for all metals and plastics) and 3g water. Beware though, I have found that a ultrasonic cleaner will remove paint from spinning reels no matter what solution i use so I clean all painted parts with WD40 by hand.
I rarely use anything other than dish soap. Like you, I have had bad experiences using acid based cleaners like the citric solutions and have had paint loss or discoloration as a result. Thanks for sharing your thoughts - Dennis
I am ready to try that. Stainless should be nice and shiny. Brass may be "stained" due to age. Bearing will need to be re-lubed as this process will take all of the oil and grease off of the parts - Dennis
Yes. Depending on what chemicals are used. I have seen acid based chemicals destroy the labels, decals and some metallic based paints. I have largely stayed away from those and only use them on plastic or graphite type finishes. I generally use dish soap as the most aggressive cleaner in the ultrasonic machine - Thanks Hashem - Dennis
@2nd Chance Tackle Thank you for your reply. I heard from another RUclipsr that regular Simple Green is harmful to aluminum, but not the HD version (purple) of Simple Green. I hope it is right, since I changed my wish list order. I am waiting for holiday discounts to purchase a ultrasonic cleaner. I sent back a small version of it few months back. All the best.
Great point! Yes, you need to be careful with the decals and also very careful with the cleaning solutions if you are using anything other than water as they may change the paint or dull the metals - Thanks for the note - Dennis
yes - I bought a DK Sonic. It holds about 1 reel and about 2 liters of cleaner. I got it on Amazon and I think the price was around $65. This is good for the occasional use or hobbyist. I don't think there is much difference larger or smaller other than capacity and "cook" time. This one is middle of the price range and has worked fine - Thanks for asking - Dennis
It does not usually damage paint if you are using water as your cleaning agent. If you use other cleaners that contain acids or other chemicals, it can strip or dull the surfaces - Dennis
I only use water and maybe dish soap. Some of the other chemicals, like you say, will discolor or fade the finish or worse, remove the badges, etc. Thanks for the note and added information - Dennis
Yes. It works OK for my needs. I normally just clean one reel at a time and I usually disassemble the reel prior to putting it in the machine, so I find it is OK at that size. I don't use it for other things like automobile and machine parts, so the size is not an issue. Thanks for asking Paul - Dennis
Please send me a note to 2ndchancetack@gmail.com or contact me through my website www.2ndchancetackle.com and I will send you the details. Thanks for asking - Dennis
Would something like Shark Hide metal protective coating be good to apply on the chrome, stainless and aluminum parts to ward of oxidation, rust, tarnish? Try it out on new as well as old?
I'm not familiar with that product. My guess is that as long as the product is not caustic, that it will be fine as a protective coating. I will need to do more research on it - Thanks for the tip - Dennis
Dennis, The machine does a great job. I have a question, when you take the basket of parts out of the cleaner, do you rinse the parts under with water in the sink? I can imagine there would be residual soap and grease that would dry on the parts if you didn’t rinse them. Thanks for all the great videos.
I am glad I found your channel. Found a little old 1/0 Senator for 7 bucks at a thrift store. Seems like it just needs a clean and lube. Also picked up some old knuckle buster to decorate a shelf. Thanks for the vids.
You are welcome. The 1/0 is the same internals as the Long Beach 6/0. The difference is in the trim package, so go ahead and do the service. Plenty of parts are available. Thanks for watching - Dennis
Always nice to get something that truly works .
I need to experiment with the time and temperature to hone in my skill, but I am impressed with he initial trial - Thanks for watching - Dennis
A great tip: using glass jars or vases with solution submerged in the basket water is a great way to keep parts organized and is easy to clean up afterwards so you don’t have to clean the machine every cycle.
The ultrasonics go through glass.
Thanks - always looking for ways to improve - Dennis
I work in the Dental Laboratory field and we have ours partially filled with distilled water and than place glass or plastic containers filled with whatever cleaning solution at a slighter higher level than the water so that container stays on the bottom. This of course would be for smaller parts but the water only needs to be changed periodically and saves money spent on cleaning solutions because you can use small containers for small parts.
Another great product is a high pressure steam cleaner with a hand held trigger. This cleans everything really quick and than the water can be blown off with high pressure air.
Another great product is a high pressure steam cleaner with a hand held trigger. This cleans everything really quickly and than the water can be blown off with high pressure air.
Is the a commercial product or is th steam cleaner available for the home shop? Sounds like a good alternative if it is easy to use, compact and reasonably priced. - Dennis
That ultrasonic cleaner does a great job. Thanks for the demonstration. Dennis, you probably already know not to use Simple Green on painted metal parts in an ultrasonic cleaner. They'll fade or it'll even make the paint fall off. Dawn dishwashing detergent and water will do a good job on painted parts.
Chester - I did not know! This is my first experience with the product. Thanks for the tip - Dennis
@@2ndChanceTackle Dennis, you'll be ok using diluted Simple Green on painted metal parts for about 4 minutes at the max in a u.s. cleaner. I don't have an ultrasonic, but will occasionally soak and scrub painted metal parts in Simple Green just long enough to knock off the grime that WD-40 misses, then rinse everything with water then let it dry.
I use my ultrasonic more than I ever thought I would. My father is a dentist so I've got one of his old units. Whether it's fishing reels, small motor parts, tools, anything. I also use simple green. I tend to go a hair stronger but that is because I'm consistently adding a bit of water. One thing is, try preheating it. Get it hot and then start.
Thanks for sharing!
I'd like to see this reel all back together. Think you'll have that vid soon?
David - the video will be posted tomorrow for the Mitchell 622 reel - Thanks for following - Dennis
Wow buddy thats great to see this new ultrasonic cleaner may God bless you with this cleaner works good gor you how much its cost
The cost is around $80 US through Amazon. That cost including the shipping - Dennis
I bought one of these and it works great. I am concerned about putting the plate with a bearing into the cleaner as I'm concerned it would flush the lubrication out of the bearing. A dab of grease on the outside afterward does not seem adequate. Thanks
Thanks for sharing. There just isn't that muck lube in the bearing, but it can be removed if you prefer to leave it off when using the cleaner - Dennis
@@2ndChanceTackle should the bearing be oiled rather than grease?
Your choice. I prefer oil, but that evaporates quicker than grease, o you need to be committed to frequent service. If that is not the case, then grease is a better alternative. I usually use the dab of grease on customer reels as they can go quite some time between servicing - Dennis
Thanks for your answers. I'm learning as I go. Here's a tip for you as you struggle with those little screws down inside. A dob of grease on the tip of your screwdriver will make the screw stick to the tip and you can reach right in with the screwdriver.
I use a 4g commercial grade ultrasonic cleaner and the solution I use is 1g of Simple Green Aviation cleaner (safe for all metals and plastics) and 3g water.
Beware though, I have found that a ultrasonic cleaner will remove paint from spinning reels no matter what solution i use so I clean all painted parts with WD40 by hand.
I rarely use anything other than dish soap. Like you, I have had bad experiences using acid based cleaners like the citric solutions and have had paint loss or discoloration as a result. Thanks for sharing your thoughts - Dennis
I am curious how gears will come out? Nice and shiny or mediocre. I’m sure it would do a decent job on BB also
I am ready to try that. Stainless should be nice and shiny. Brass may be "stained" due to age. Bearing will need to be re-lubed as this process will take all of the oil and grease off of the parts - Dennis
2nd Chance Tackle looking forward to the results and vid!
Have you noticed the labels on reels getting damaged due to use of ultrasonic cleaners? Thanks for the reply.
Yes. Depending on what chemicals are used. I have seen acid based chemicals destroy the labels, decals and some metallic based paints. I have largely stayed away from those and only use them on plastic or graphite type finishes. I generally use dish soap as the most aggressive cleaner in the ultrasonic machine - Thanks Hashem - Dennis
@2nd Chance Tackle Thank you for your reply. I heard from another RUclipsr that regular Simple Green is harmful to aluminum, but not the HD version (purple) of Simple Green. I hope it is right, since I changed my wish list order. I am waiting for holiday discounts to purchase a ultrasonic cleaner. I sent back a small version of it few months back. All the best.
Thank you, Dennis! I'm in the market for one. How's this one holding up?
It's good! I've had it a few years and it still works fine
@@2ndChanceTackle Good to hear. Mine is on the way.
It will take off any decal, even if it lasted for decades, it will remove it!
Works awesome for bearings!
Great point! Yes, you need to be careful with the decals and also very careful with the cleaning solutions if you are using anything other than water as they may change the paint or dull the metals - Thanks for the note - Dennis
I forgot to add that I use "reusable" coffee filters for small parts
Thanks Jon - the coffee filter idea is a great tip! Dennis
Have you ever nickel plated any reels ?
I do not paint or do any cosmetic work on reels. Thanks for asking - Dennis
Really enjoying your videos! Can you share the specific model you bought? Any thought on larger or smaller versions?
yes - I bought a DK Sonic. It holds about 1 reel and about 2 liters of cleaner. I got it on Amazon and I think the price was around $65. This is good for the occasional use or hobbyist. I don't think there is much difference larger or smaller other than capacity and "cook" time. This one is middle of the price range and has worked fine - Thanks for asking - Dennis
@@2ndChanceTackle does the ultrasonic cleaning damage paint?
It does not usually damage paint if you are using water as your cleaning agent. If you use other cleaners that contain acids or other chemicals, it can strip or dull the surfaces - Dennis
be careful with aluminum too. Simple green in an ultra sonic will really mess it up badly. I learned the hard way
I only use water and maybe dish soap. Some of the other chemicals, like you say, will discolor or fade the finish or worse, remove the badges, etc. Thanks for the note and added information - Dennis
Hi again Dennis. is the 2 litre DK Ultra Sonic cleaner large enough for your needs? Thanks, Paul, New Zealand.
Yes. It works OK for my needs. I normally just clean one reel at a time and I usually disassemble the reel prior to putting it in the machine, so I find it is OK at that size. I don't use it for other things like automobile and machine parts, so the size is not an issue. Thanks for asking Paul - Dennis
Im lucky , have one at work to use!
One other thing Dennis. DO NOT put anodized aluminum in for very long. It will make the anodizing hazy.
Yes it will. Also be careful of the cleaners you put in it too
Can use for plastik reel?
That should be OK. Be careful what cleaners you add. Make sure they are OK with it
What time and temperature are you using?
15 minutes. Warm but not hot water
Do you still use this thing or did you return it? Haven't heard about ultrasonic cleaning for a while in your videos
Yes - I still use it several times a week. I think it does a good job for the price paid. Thanks for asking - Dennis
How do I get a penn 85 to you
Please send me a note to 2ndchancetack@gmail.com or contact me through my website www.2ndchancetackle.com and I will send you the details. Thanks for asking - Dennis
Would something like Shark Hide metal protective coating be good to apply on the chrome, stainless and aluminum parts to ward of oxidation, rust, tarnish? Try it out on new as well as old?
I'm not familiar with that product. My guess is that as long as the product is not caustic, that it will be fine as a protective coating. I will need to do more research on it - Thanks for the tip - Dennis
Dennis, The machine does a great job. I have a question, when you take the basket of parts out of the cleaner, do you rinse the parts under with water in the sink? I can imagine there would be residual soap and grease that would dry on the parts if you didn’t rinse them. Thanks for all the great videos.
Yes - I do rinse these off with water once the machine has done its job - Thanks for asking - Dennis