Ep31: How to Decode A Master Lock 175 With Retail and Homemade Tools
HTML-код
- Опубликовано: 14 окт 2024
- #PugsPicksLocks #LockPicking #Locksport #LeftHanded #MasterLock
The Master Lock 175 family of combination padlocks are very common and have been improved over the years. This video goes over how to decode a lost combination with a retail decoding tool and a homemade decoding tool.
Lock:
Master Lock 175
Tools used in this video:
Southern Specialties - .006" Notched Decoder - Model SS-CSD
LAB - Curved Shim - Model LSMO
Shoutouts:
Left_Hand_Loki - / @left_hand_loki
Thank you it was the bend in the decoder that was the breakthrough!
I'm glad the tip worked for you!
my dad left me a 175 in his tool box , this week I needed a lock the 175 was the only one I could find but it was locked and I did not remember the combo I still have the reset key, thanks to you I can use my dad's old lock
That makes me really happy to hear! I'm glad I was able to help you out!
Absolutely, fantastic, thorough walk-through of how to decode the newer master lock combination padlocks! Thank You for the info. I’ve never took the time to try to learn to decode them properly. I have always just use the cheap disposable shims to bypass them open. But you sure have to bend them like crazy to get them past the new shielded wheels (why I use cheap disposables when bypassing).
You are very welcome! The newer locks with the tighter tolerances and the anti-shimming measures are buggers... I'm happy to help!
Thanks a lot, found two 175 padlocks, I tried for hours but thanks to your video and patience I got two usable padlocks with new combination
That's awesome! I'm glad you were able to recode them and make them usable!
Great demonstrations on the 175. I learned a lot from this video👍🦊
Thank you! I'm glad the video helped you!
It’s so good to see your videos again! This was a fun one ☺️
Thank you!
Hey man, great video. Thank you for the shout out.
Thank you! And my pleasure on the shoutout... you def' deserve it!
Great explanation maye. It's good to know the lock manufacturers listen amd make improvements 😊. Have a great week pugs 👍🤜🤛
Thanks, Nick! Even with as much grief as Master Lock gets, I think they are trying. At the end of the day, though, most locks are there to keep honest people honest.
@@pugspickslocks Indeed, I entirely agree. And as for those who slate Masterlock, how many have opened a Masterlock 19??? not many...not all master locks are bad. The lotos have a great keyway too. Way more challenging than an abus LOTO
Master Lock LOTOs are fun to pick! I find the PacLoc LOTOs more of a challenge. Haven't tried the Abus yet.
Great vid. These new 175s are more challenging
Thank you! And, yeah... The new 175s have way betterer tolerances, and it felt like some anti-bypass shielding, too.
Great video. Subscribed.
Hey! I appreciate that! Thank you!
Thanks for perhaps the best video overall on this subject. I have a brand new out of package 175D. I set 0-0-0-0 and the latch wouldn't open. Following your procedures with an aluminum can decoder tool, I confirmed 0-0-0-0 is correct. I guess I have a defective lock? Any recommendations (other than return to store)?
Hey... You try pushing down on the shackle? Set the combo, and then push down on the shackle and let the spring pop it back up.
And thank you! I appreciate the comment!
@pugspickslocks
Ya, I've got two of these. The 1st one, set 0s, then push down shakle to spring it open.
Hm... If it isn't opening, either defective or not all zeroes. I'd have to play with it to tell.
@pugspickslocks
There is still possibility my decoding procedure is in error no matter how many times attempted. Would manual bypass to open the shackle allow me to use the included key reset tool to enter a new combo? Problem tho, I don't have a bypass tool and not worth my time and $ to buy one.
No, unfortunately bypassing will open the shackle, but the code wheels have to be properly aligned to change the combination.
Very nice!
Thank you! Cheers!
Great information!!!😀🐈⬛🐾🐈🐾👍
Thanks, Chris!
love the video. I still can not pick my 175.
Are you able to slip a decoder between the dials?
khi dùng công cụ mở được chốt ra mà lại không nhớ mật mã thì có cách nào đổi được mã xác nhận không. Tôi dò điểm khuyết như hình mà cũng không ra. cảm ơn!
No. If you bypass the lock, you cannot recode it. You need to decode the combination to recode it.
Gave up and threw it at the ground and it opened
HAH!! Yes, they can def be bumped open. Impact at the correct angle will move the locking arm/plate/thingy enough to let it open.
I just used a piece of a Mtn D can to open a 175 that I found in the street 15 years ago, using your video!!!
It’s been hanging in my garage and I’d get it down every once in awhile and try different combos, with no luck.
I came across your video a few minutes ago and BAM! It’s a usable lock now!
Thank you for posting!
That's awesome! I'm so glad to hear the video helped! You just made my day!
Joke😂
LOL!