I don't know about laughing, but i definitely heard a loud "Thump" where I'm sure MB fainted when he said baking soda and super glue is for amateurs lol
Also love how you put your baits on a gravitational roller when you're applying your epoxy that shows how much experience you actually have I've seen so many people just apply epoxy but myself I like to use a gravitational roller like you're using there because it helps the epoxy to move where it needs to move to and not just sit in one spot
I've had other BPM baits ruclips.net/user/postUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 before and they've pretty much always came through for me with the suskie smallies here and even with the walleye and pike, but I realized I didn't have an "in-between" pattern so this junebug one fills that role in no problem. it pairs up magnificently with a junebug Zoom Z-craw Jr that was trimmed a couple millimeters before the hook slots and rigged sideways for that fatter panfish side profile while still being a nice'n'compact presentation, a real power-finesse bait. Hell, it was so pretty I even bothered to fotosketch the pic into a watercolor painting image just to show you it's beauty! Even the blades are really well made, sure, they're not of Hildebrandt-level exquisiteness but look at the bead's reflection on the colorado blade, definitely well-made! The only "problem" spot it had was a bald spot in the skirt but it was nothing that I couldn't easily fix with a but of tuggin'n'shiftin' with the strands for a couple of seconds, besides that it is pretty minty!
I don't feel bad paying over $150 Australian dollars for 1 popper anymore...the amount of work in this is unbelievable. Just save my rage when a GT I can't stop goes under the reef. Great craftsmanship!
Beautiful! I love the detailed paint schemes that you do on your lures. The blue and green on the back of that bait go really well with each other. It was cool to see you use the Canadian toonie cuz I too live in Canada 🇨🇦 keep making amazing lures👍🏽
I was singing to my self “supa glue and bakin soda” as you said for armatures. Then I actually gasped as you said I bed you marking baits fans gasped out there. Cracked me up!!
"There's many Marling Baits fans gasping for air..." as I sit here with mouth agape. I died a little on the inside, but then I saw how easy is was to shave that Bondo off with a knife, and my faith was restored in you.
I always preferred the "split down the middle" approach to bait making. It allows for the wire to be run exactly how you want, and also allows for weight channels to be in the exact spots you want. Can even do loose lead shot so you can do rattle baits easily. We have big pike here everywhere I fish for bass with crankbaits, so through wire is just the best design when it comes to getting the odd 20lb pike. Even when it's not needed, it gives you that extra bit of confidence that your homemade bait is not going to be the weak point in the setup.
To make simple lures look so pretty is just another proof, that this is not talent or craftsmanship, but simply magic...or witchcraft...can't decide ;)
Thank you so vary much for you ministry it starts my day off looking up. Hope Chris will recover rapidly you need her directions. Your Brother in JESUS Rick
Great artistry mate love the finish you get . The cup for our popper can be easily made with a modified spade bit done in 30 sec ready for sanding give it a go
Dang shots across the Marling bow!!! All joking aside you and him are my favorite bait channels on RUclips. I can only hope to make a bait as perfect as either of you!
Thats awesome to hear. Just focus on having fun with the hobby, your skills will develop while you play around with stuff. No one is a master when they start, it takes time. 😉
You have a wonderful channel where you share your experience and wonderful lures in great detail, thank you very much! I have subscribed and I will watch your films with interers.
That was VERY nice!! Making a couple myself and will also use them but my paint job will only wish to be that good. Also I will be adding rattle beads to the inside for sound attraction but once more I have to say: Nice Paint job!
I've used both "Bondo" and CA + soda and the problem with some bondo brands is that it might shrink after some time when the bondo layer is thick, CA + soda does not shrink. Epoxy repair putty would be the optimal solution for plugging the lead holes.
Хобби
I’m over 1000 miles away and I can hear Marling Baits laughing along with you.
More like marling baits laughing at him cause he’s a brainwashed sheep person unlike marling
@@RockyMountainWest13 lol wtf
@@RockyMountainWest13 could you please explain?
I don't know about laughing, but i definitely heard a loud "Thump" where I'm sure MB fainted when he said baking soda and super glue is for amateurs lol
Also love how you put your baits on a gravitational roller when you're applying your epoxy that shows how much experience you actually have I've seen so many people just apply epoxy but myself I like to use a gravitational roller like you're using there because it helps the epoxy to move where it needs to move to and not just sit in one spot
I only visited here because Marling Baits said you were a Master Baiter. He was right! stunning work!
I've had other BPM baits ruclips.net/user/postUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 before and they've pretty much always came through for me with the suskie smallies here and even with the walleye and pike, but I realized I didn't have an "in-between" pattern so this junebug one fills that role in no problem. it pairs up magnificently with a junebug Zoom Z-craw Jr that was trimmed a couple millimeters before the hook slots and rigged sideways for that fatter panfish side profile while still being a nice'n'compact presentation, a real power-finesse bait. Hell, it was so pretty I even bothered to fotosketch the pic into a watercolor painting image just to show you it's beauty! Even the blades are really well made, sure, they're not of Hildebrandt-level exquisiteness but look at the bead's reflection on the colorado blade, definitely well-made! The only "problem" spot it had was a bald spot in the skirt but it was nothing that I couldn't easily fix with a but of tuggin'n'shiftin' with the strands for a couple of seconds, besides that it is pretty minty!
The shots fired part had me cracking up. Lol
@SolarBaits - For that comedy, you received another subscriber
Excelente muy bueno súper genial saludos
Coba spot kita bng di Bengkulu 🎣
I don't feel bad paying over $150 Australian dollars for 1 popper anymore...the amount of work in this is unbelievable.
Just save my rage when a GT I can't stop goes under the reef.
Great craftsmanship!
Absolute wizard with the airbrush... Great inspiration. Thanks.
19:18
"angry Marling Baits noises"
Beautiful! I love the detailed paint schemes that you do on your lures. The blue and green on the back of that bait go really well with each other. It was cool to see you use the Canadian toonie cuz I too live in Canada 🇨🇦 keep making amazing lures👍🏽
I glued a drill bit into a golf ball, then taped/glued sandpaper onto it. It was a large popper, so a golf ball worked pretty well! Nice work!
Impressive work as always. Loved the stenciling and paint job.
Mikko for president!
I was singing to my self “supa glue and bakin soda” as you said for armatures. Then I actually gasped as you said I bed you marking baits fans gasped out there. Cracked me up!!
"There's many Marling Baits fans gasping for air..." as I sit here with mouth agape. I died a little on the inside, but then I saw how easy is was to shave that Bondo off with a knife, and my faith was restored in you.
Pew pew shots fired. Lol. Really great work as always. No one does it with more skill and less tools. Really great build.
Dude! That’s a gorgeous looking bait and very inspiring.
Absolutely gorgeous! Steiper slayer for sure. Your skills are beyond compair.
AMAZING !!!
Poor Marlin Baits ........ LOL
That Popper would get eaten and crushed, 1st cast "Down Under" !!!
Brilliant Paint Work too !!!
Why’s that ?. People use jelutung for top water and it’s not much denser then balsa.
I always preferred the "split down the middle" approach to bait making. It allows for the wire to be run exactly how you want, and also allows for weight channels to be in the exact spots you want. Can even do loose lead shot so you can do rattle baits easily. We have big pike here everywhere I fish for bass with crankbaits, so through wire is just the best design when it comes to getting the odd 20lb pike. Even when it's not needed, it gives you that extra bit of confidence that your homemade bait is not going to be the weak point in the setup.
Stunning popper. Children of Bodom was a nice touch too
Awesome looking popper. I would love to have a few of them in my box.
It's amazing that one such movie can teach you so much! Something beautiful! Thank you very much, Master!
Not many videos draws my attention but yours does!!!Awesome!!!Cant stop watching!!! From South Africa, Cape Town!
The marling baits jab had me rolling I watch you both lmao I was like 😱-🤪😂
Ya a Poet & didn't know it! Beautiful lure that's for sure! 👍😷👍
That paint job is incredible 👏
Very Very nice work brother 👏 👍
Regards and my salutations from Tetouan. 🇲🇦 Morocco
You are the master. I´d love to see it in a fishing situation and how it pops on the water. That is , when the water softens up in the spring.
It's great that the bait is unique and has a high artistic imagination in coloring and finishing
you're welcome
Really enjoyed watching your skill in making this lure.
Thanks for watching John
I am floored by your skills.👏
To make simple lures look so pretty is just another proof, that this is not talent or craftsmanship, but simply magic...or witchcraft...can't decide ;)
Thank you so vary much for you ministry it starts my day off looking up. Hope Chris will recover rapidly you need her directions.
Your Brother in JESUS Rick
Wow..... Beautiful lure. I like it. 👍
Beautiful as always Solar
Great artistry mate love the finish you get . The cup for our popper can be easily made with a modified spade bit done in 30 sec ready for sanding give it a go
Great tip, i think i will try that out
Amazing work as always 🤘🏻
Amazing job. I admire your skill.
That maccy lure was to say the least impressive you sir are a master. I made a similar tool but used shot blasting grit and epoxy cut like b.....d.
This is incredible. That would work really well for bass fishing here in the UK. (sea bass)
Awsome as always Mikko 😁👍
amazing lure! and sick pukko
Dang shots across the Marling bow!!! All joking aside you and him are my favorite bait channels on RUclips. I can only hope to make a bait as perfect as either of you!
Thats awesome to hear. Just focus on having fun with the hobby, your skills will develop while you play around with stuff. No one is a master when they start, it takes time. 😉
The work looks great as always. I wish I was that good at bait making
same i
I’m new to your Channel but your skills and products are awesome!!
Very nice work mate!!
Brilliant as usual
Very awesome! A lot of time and effort on an awesome bait
Beautiful work! Very impressive.....
This is a masterpiece 😍🏆
Damn that burn 😂🔥
Good job bro
Amazing popper lure👍👍👍
OUCH!! About the superglue statement..hahaha... Keep making lures, but forget about any future in poetry! Great work as usual!
haha yeah maybe your right about that
Great video love the art work I see you like the new saw great video !!
Wow, great work!
You have a wonderful channel where you share your experience and wonderful lures in great detail, thank you very much! I have subscribed and I will watch your films with interers.
Really nice job there as always amazing talent 👍👍👍👍👍
That was VERY nice!! Making a couple myself and will also use them but my paint job will only wish to be that good. Also I will be adding rattle beads to the inside for sound attraction but once more I have to say: Nice Paint job!
Awesome looking popper
Damn dude that looks sooo good!!!!! Grate job ese!!
*great
Amazing. Just too beautiful and perfect to fish with...
As always beautiful.
I've used both "Bondo" and CA + soda and the problem with some bondo brands is that it might shrink after some time when the bondo layer is thick, CA + soda does not shrink. Epoxy repair putty would be the optimal solution for plugging the lead holes.
If I want to buy it for a fee, is it possible to send it to me?
The best lure 👍🏼
Great video man.
you can buy an abrasive ball sander for the mouth cup, will fit rite onto your drill.
That is freaking awesome. Suggestion: try a big metal drill bit for cup. Hope you have many fish with it.From Ireland
That’s beautiful thanks for sharing your technique 👍🏻👍🏻👍🏻🖖🤩
Nice job man ! When the ice melt show us some popping action ;)
Amazing popper lure.
This is so creative and talented. Such a cool video broo 👍👍
this is a nice lure my friend
I'm new at your channel as a anglers automatically hit the subscribe button you inspired me to make my own lures or stick bait
Man, that's just pure, fantastic art! Makes me want to put it on display instead of using it!
Bang yang itu buat aku aja
Extra ordinary popper lure master perfect 🤩
It looks amazing
Good job...
I like it soo much...
Keep ut up...
This so awesome nice job
Wow ... Amazing sifu ..
Parabéns ficou muito linda isca dos monstros top👏👏👏
good job, very nice work
Amazing...
.awesome bro 👍👍
I might try using that stuff instead of baking soda and super glue cuz that looks a lot easier to work with
E incredibile, sei il numero uno bravissimo, un vero artista.
Nice work 🎣👍🏼
That is awesome bro
That looks great
Fantastic work thank you very much your video.
Very good Job. Congratulations
amazing work
Impressive work
Trabalho espetacular , podia fazer um vídeo a falar sobre as tinas usar
Rest in Peace Alexi. Beutiful bait as always 👍👍
Gone too soon for sure
41 is just Half the way. Cob Will be like hurriganes. Music Will live on.
that thing is epic!
Amazing as ussual👍👍👍👍
Il est magnifique bravo 👏👏👏👏
Beautiful!
It looks like bondo is much easier to work with. Great lure.
Awesome work
Keep it coming your a master crafts angler please sell will buy
Hi great making DIY popper lure Im from Philippines and i love popper fishing, i hope i can get one of your made popper hehe
Excelente trabajo