This video is very insightful. I'm on a netgear router with expressvpn which drops after every 30 mins. How do install nordvpn on netgear with other vpn.
Hi Jason. Thanks for the information. I followed your instruction word by word. However, in the end the Open VPN under Status tab is showing 'nothing' for Local Address, Remote Address, VPN Client Stat, Clientlog . I am sure I have got correct NordVPN login credentials because I can login to it on my laptop. I live in UK, my Linksys router is connected to the Virgin Media Hub3 router (which is not in modem mode) by ethernet wire. Also, Please can you let me know how to setup WiFi password of the DD-WRT Linksys router ? Thanks
Thank you for the detailed instructions. I would have never had the patience to try and do this by reading the forum instructions. Much appreciated brother!!
This tutorial works like a treat BUT it has a big problem. Maybe some of you also experienced this: Sometimes, the VPN client in the router crashes/looses connection and reveals your true IP adress in the process. This REALLY needs a KILLSWITCH feature. (or maybe there is a setting and I was too dumb to find it)
Thank you for a thorough instruction, but because there are so many menus and selects and clicks, I had to pause the video several times to catch up with you :) Thank you. BTW, you have a very pleasant voice too :)
Thank you so much. I have been trying for a long time to figure out how to do this. The information I was getting was over my head. Finally I found this video. After about 4 attempts I finally succeeded. I am so pleased with this.
So I followed along with the video using my Asus RT-AC66U. Everything went perfectly until the end when I went to check the status. I did not get CONNECTION SUCCESS. I got this... State Client: RECONNECTING init_instance Local Address: Remote Address: Status VPN Client Stats TUN/TAP read bytes 0 TUN/TAP write bytes 0 TCP/UDP read bytes 0 TCP/UDP write bytes 0 Auth read bytes 0 Any ideas what I may have done wrong or perhaps how to fix this? Thanks Jason.
Great video. I appreciate you doing this as I was going to set up an old router to NordVPN. My only question is, will I have to change those settings again if I want to connect to another server in another country to access Netflix or to download apps that are country specific. Could you please make another video showing what you would need to change please. If you can't, thank you for making this video.
Here is what I want to do. I have a r7000 router with DD-WRT installed. I want to connect to USA streaming sites with ROKU through a Nord VPN using Wi-Fi. Can I activate the Nord VPN only on the Wi-Fi to feed my Roku, but have the 4 lan ports operate as usual (no vpn)? Thanks
Thanks for the tutorial. Are/did you do a video on setting up the vlan you mentioned? I want to set up Nord for selected devices on my network or some sort of on demand type service. I am also using ddwrt.
Hi there just found your video which is great as just switched to Nord VPN...question... Will these settings affect my Internet providers set up? Total tech infant speaking here 🤣
Good afternoon I tried to do my dd-wrt router to with NordVPN I follow you video to the letter but it didn't work for me I realized after I was not connected to the internet lol so do I now need to do it all over ? The firmware flash was already done I'm just talking about trying to set it up with NordVPN !
Can you do a video on how to set up a PC to run a VPN with a separate router that you can connect to? Only asking because I know most routers on the consumer market have severe hardware limitations. If I knew how to set up an open vpn client on a decently powered Pc than connect that PC to a router and then have all my devices that want encryption to be funneled through that router as opposed to my normal router that would be great!
For up to date firmware at Home > Downloads > other Downloads > betas > choose the year > then Month\Year > then your model. They have finally put up a disclaimer ... so do not use the Router Database ... you can brick the router.
WOW! This video is exactly what I want to do. I just bought the Lynksys WRT 3200ACM router for this very purpose with NordVPN. I don't have a Nord account yet and haven't even taken the router out of the box. But I don't know a thing about networks or routers or VPN's. Unfortunately, you went so fast, I am sort of afraid to try. I have some variables like my computer is in a different room from my router. Also, I suppose I would need to download DD-WRT to the computer before I switch routers otherwise I won't have a internet connection. Is that correct? Also, you mentioned flashing the router to put the DD-WRT firmware on it. If I haven't set up the router yet, could I just go straight into manual setup on the initial setup?
If I have a dedicated IP address, should I choose the NordVPN server that it will work at or should I still use the closest/less crowded server that the nordVPN provides?
Hi, done all settings just like you and is connected now, my ISP provides 50Mbsp of speed, but the ethernet and wifi non the router is only 5Mbps, what am I doing wrong? Please advice, thanks.
As you finish status and go to OpenVPN it says Client: WAIT ....... But it appears to be stuck, yet I can make other adjustments and move the scroll bar. Any answers?
Question for you, I'm trying to set up either a seperste guest VPN network or make my 5g network a dedicated VPN. I have an Asus RT-AC66U B1. How would you recommend I go about that? I'm assuming install dd wrt but I can't find anything user friendly. Any way you could help me out?
How can you remove the dd-wrt program from the router if you decide to go back to factory? I have tried resetting back to factory within in the router and updating to the factory firmware but nothing ever happens. Pushing the reset button on the back also has no change.
Ok so I setup everything just like you did in the video I checked it 4 time so when I go to status it says Client : Reconnecting int_instance What does this mean
I followed the instructions however it does not work, reason being there is no option to input the local service provider’s user name and password. Can you guide me where to stick in this info please. Thanks.
Can you add into this config a PiHole? I already have and love my PiHole, and want to upgrade my ASUS routers to do-wrt, and get a vpn. Just not sure how to make it all work together.
I have a Q! How can I set up a VLAN, for the same router? The thing is that my LAN is not working when I connect the VPN. Plus it doesn't work at all (Not VPN connected) when connected to my company cable box. Can you help me? or do you know where or who can help me? THANKS BTW! you totally rocked!
yeah but what if your looking for a server for use on xbox? You have issues with that server then you have do all these steps over again? Too much of a headache.
is there a way to have a dual-band or tri-band router use the VPN on one of the 2/3 networks? (IE have my 5Ghz network be the VPN, while the others are normal connections.
What would be the equivalent for OpenVPN server of the script from NordVPN you pasted in the additional config box? I am using OpenVPN Access Server on a linux VPS as my VPN server and a linksys wrt3200acm running dd-wrt vpn as VPN client.
I have a Netgear R7000 but need to install it as a secondary router. The DD-WRT Firmware I am using is DD-WRT v3.0-r44715 (11/03/20) So the description does not match in some fields. I also need to set the router up as secondary router as my ISP one is (and should remain) as the main one. I would appreciate some guidance setting up the NordVPN as I was not successful and resigned. Anyone can help or knows where I can get support in doing so? Thanks
Thanks, Byte My Bits, very useful video and I appreciate your calm and easy to understand voice. I think I will get NordVPN with your link and discount. Thanks again
Evidently the DD-WRT database has been down for some time now "Note: Due to maintenance work the router database is currently not available. " I have seen this message for 2 weeks now . 6/8/18
I had the same prob last night. I emailed the contact us people and had a link to the dvd-wrt firmware in my inbox the next morning. I feel better now that I did it this way...go and send them an email. If not, pm me and I’ll send your the email from them...with all the disclaimers of course
Nice thank you. Now i have a guest wifi actived but i don't want this guest have vpn actived, how make that please ? VPN for primary wifi network but no vpn for guest wifi how make ? THX
i had all of this working before i moved, then i moved got a new modem and now the router wont connect to the internet. under the status theres no connection. i flashed the router back to factory linksys firmware everything works fine. flash back to ddwrt and it wont connect. what could the difference be between the old modem and my new one? my new one is a tplink ac1750
I went through all your steps and it was working in the beginning, but now it won't connect to the server. I do not get the connection succes at the status page. I set back the router to factory settings and went through the setup again. I did it your way and NordVPN's own way, but still nothing. Any clues on what I can do?
Thank you worked great. Although I've noticed my plex server can't be accessed from wan and my ports are forwarded to 32400 and 32401 with my local ip address. Any suggestions on how to remotely access plex with nordvpn on my ddwrt?
fastjp72, I haven’t tried wan access setup for PLEX on my Nord VPN router yet. Using the DD-WRT settings I am able to selectively set VPN on/off for each device. If I select off for the PLEX servers does that sound doable?
I've got Nord VPN on my laptop, i've discovered its next to impossible to use any external monitors while in the VPN mode so pretty much anything you wanna watch like netflix has to be watched on the computers own screen, while installing nord on a pc is as easy as pie this is pretty complicated and seems to tie up the main router, i need a solution that involves a blue peter style vpn router, ie this is one i made earlier and works alongside my ISP router so i can use the default internet most of the time
P.S. I am currently using Nord on a Mecool M8S Pro L android TV box. It works great for my streaming of Zion TV, Showbox, etc. However, it's blocking my Netflix. Is there a setting in Nord so it doesn't block Netflix or Amazon Video or will moving Nord to my router and off the android tv box resolve it? Thanks.
I have a hp chrome tablet and already have my nordvpm on it as well as my firestick but here's that word, But. I can't get my notebook to share the nordvpn to my Xbox one how to find away to get my internet to share from my Chrome notebook?
Question: i have a AC duel 2.4/5 Band router and I want Nord only on one of them, is that possible? Additionally what about anything physically wired to my router IE my smart tv/Xbox?
I have a question can I use my phone bc I don’t have a laptop rn so I am able to connect my nordvpn though my phone to my ps4 or do I have to use my hotspot to be able to do that ???
no and do not follow this guide... there are some differences between this vid and NORDVPN's website if you look up your specific firmware. go to nordvpn's home page then navigate to help > connectivity > router > then look for your firmware. their instruction set is so easy to follow it is seriously "idiot proof." i think they sat down a bunch of 8 year old kids and 70 year old grandmas and asked them to follow the steps. if they could do it, then they posted the instruction set.
Deissek there are very good prices on the model under this one that is slightly weaker but prob good enough for most people and its considered more stable than the 3200. The Linksys wrt1800 if you can find them, they might have been resplaner by the 1900ac now. The 1800 has been on sale several times for prices down to 120usd. Ive also seen the 3200 on sale for 180. If i check newegg.com now I can only see diffrent versions of the 1900ac for prices ranging from 100 and up. Don’t know status of ddwrt compatibility though. You could prob get a 1800 ac on ebay for a damn good price though and theyre considered one of the best and most stable for ddwrt fw.
Have you more than 1 router on your network? I got this error because my two routers were using the same IP address and causing a conflict. See my post.
Hi i do this same as you on linksys 1900acsv2 using DDos-wrt but I’m getting dns leaks when I check online is this right a reply from you would be very helpful.
I wish I knew what I was doing wrong, I followed it exactly to the description but the status doesn't change and nord says i'm unprotected. I think I'll try express vpn as they offer their own firmware flash file.
followed this method meticulously and it didn't work but in the search for answers I looked into the flashrouters way and wow so much easier and a perfect solution.
Wtf. Have no internet after addin GB file and reboot. ??? Cannot set up anything on the dd-wrt page. Internet will not come back on. Did everything exactly up to that point
I have the exact same router and tried to set it up but connection wasn’t successful. I tried to reset my Linksys to factory settings but the ddwrt firmware couldn’t be deleted. Anyone know a workaround? Can the ddwrt firmware be reinstalled?
Me too, it's a nightmare. I must have rest (10 seconds), done 30-30-30, and installed the Linksys factory firmware, probably around 20 times before it eventually reverted.
Got a question. I downloaded the DD-WRT software you recommended and went through steps. But I never got a "connected" confirmation, so I called Linksys and they say now that I have downloaded this "firmware" they cannot service the device. Your thoughts? Is there any way to remove the DD-WRT software so that they can access and set up the router? Thanks
I had the same problem. It seems when you copy and paste the text from the UDP file, it adds a few extra lines before the text begins. I deleted those lines and now have contact.
I have tried several times to load the DD-WRT firmware on my Linksys WRT3200ACM but at the end of the firmware load I get the message that I have lost internet contact .. and goes no further! Any help.
Jeson, great video, I recently did this to my Netgear Nighthawk and love it. DD-WRT firmware with Nord even lets you specify which devices you want to “pass-through” the router without being protected by the VPN. The default is set to every device, you simply “opt-out” if you choose. This feature is nice if you don’t want to run a dual router setup. I’m happy to see you recommending Nord, too many pluses to list them all. Two most important to me are minimal speed lost and the no log policy. Nord is based out of Panama (outside of the “five-eyes” jurisdictions.
Video starts from 2:15
too much blah blah!
MARTIN X125 god bless you
Thank you
god bless
This video is very insightful. I'm on a netgear router with expressvpn which drops after every 30 mins. How do install nordvpn on netgear with other vpn.
DD-WRT says NOT to copy the and tags
right再
Dude, thank you so much. I'm about to go work in Kuwait for the next 6 months and I've been trying to figure this out.
I have been using the NordVPN app on each device for a couple of years now. I followed your steps and conected the router to NordVPN. Thank you.
I'm not a gik and was able to set up my Linksys WRT 3200 router very quickly following the video. NordVPN working perfectly. Thanks so much !
Hi Jason. Thanks for the information. I followed your instruction word by word. However, in the end the Open VPN under Status tab is showing 'nothing' for Local Address, Remote Address, VPN Client Stat, Clientlog . I am sure I have got correct NordVPN login credentials because I can login to it on my laptop.
I live in UK, my Linksys router is connected to the Virgin Media Hub3 router (which is not in modem mode) by ethernet wire.
Also, Please can you let me know how to setup WiFi password of the DD-WRT Linksys router ? Thanks
Thank you for the detailed instructions. I would have never had the patience to try and do this by reading the forum instructions. Much appreciated brother!!
This tutorial works like a treat BUT it has a big problem. Maybe some of you also experienced this: Sometimes, the VPN client in the router crashes/looses connection and reveals your true IP adress in the process. This REALLY needs a KILLSWITCH feature. (or maybe there is a setting and I was too dumb to find it)
Thank you for a thorough instruction, but because there are so many menus and selects and clicks, I had to pause the video several times to catch up with you :) Thank you. BTW, you have a very pleasant voice too :)
I have been looking at a lot of videos for this. Yours... BEST one by a mile. Thanks.
Thank you so much. I have been trying for a long time to figure out how to do this. The information I was getting was over my head. Finally I found this video. After about 4 attempts I finally succeeded. I am so pleased with this.
So I followed along with the video using my Asus RT-AC66U. Everything went perfectly until the end when I went to check the status. I did not get CONNECTION SUCCESS. I got this...
State
Client: RECONNECTING init_instance
Local Address:
Remote Address:
Status
VPN Client Stats
TUN/TAP read bytes 0
TUN/TAP write bytes 0
TCP/UDP read bytes 0
TCP/UDP write bytes 0
Auth read bytes 0
Any ideas what I may have done wrong or perhaps how to fix this? Thanks Jason.
Great video. I appreciate you doing this as I was going to set up an old router to NordVPN. My only question is, will I have to change those settings again if I want to connect to another server in another country to access Netflix or to download apps that are country specific. Could you please make another video showing what you would need to change please. If you can't, thank you for making this video.
Here is what I want to do. I have a r7000 router with DD-WRT installed. I want to connect to USA streaming sites with ROKU through a Nord VPN using Wi-Fi. Can I activate the Nord VPN only on the Wi-Fi to feed my Roku, but have the 4 lan ports operate as usual (no vpn)? Thanks
Thanks for the tutorial. Are/did you do a video on setting up the vlan you mentioned? I want to set up Nord for selected devices on my network or some sort of on demand type service. I am also using ddwrt.
Hi there just found your video which is great as just switched to Nord VPN...question... Will these settings affect my Internet providers set up? Total tech infant speaking here 🤣
Good afternoon I tried to do my dd-wrt router to with NordVPN I follow you video to the letter but it didn't work for me I realized after I was not connected to the internet lol so do I now need to do it all over ? The firmware flash was already done I'm just talking about trying to set it up with NordVPN !
Can you do a video on how to set up a PC to run a VPN with a separate router that you can connect to? Only asking because I know most routers on the consumer market have severe hardware limitations. If I knew how to set up an open vpn client on a decently powered Pc than connect that PC to a router and then have all my devices that want encryption to be funneled through that router as opposed to my normal router that would be great!
For up to date firmware at Home > Downloads > other Downloads > betas > choose the year > then Month\Year > then your model. They have finally put up a disclaimer ... so do not use the Router Database ... you can brick the router.
Thanks for the tutorial would be cool if you can show a tut on how to tunnel nordvpn on separate devices using openvpn.
split tunneling? thats only available on windows afaik
Can I use this video to set up VPN no matter what brand of router I have?????? Or is this video linksys specific
Followed This To The T.I Get Reconnecting init_instance......Any Help Appreciated....No Speed Read
WOW! This video is exactly what I want to do. I just bought the Lynksys WRT 3200ACM router for this very purpose with NordVPN. I don't have a Nord account yet and haven't even taken the router out of the box.
But I don't know a thing about networks or routers or VPN's. Unfortunately, you went so fast, I am sort of afraid to try. I have some variables like my computer is in a different room from my router. Also, I suppose I would need to download DD-WRT to the computer before I switch routers otherwise I won't have a internet connection. Is that correct? Also, you mentioned flashing the router to put the DD-WRT firmware on it. If I haven't set up the router yet, could I just go straight into manual setup on the initial setup?
Great video! Can I set this up wirelessly or do I have to use a network cable?
If I have a dedicated IP address, should I choose the NordVPN server that it will work at or should I still use the closest/less crowded server that the nordVPN provides?
This is really appreciated. Perfectly easy to follow and worked first time.
Thanks for the video. I have set it up as you describe. However, are you able to watch Netflix on a smart TV?
Hello,i tried several times but it didnt work out for me please help,if u can help me i buy a 3 year vpn plan,use dns masq for dhcp is not listed???
Hi, done all settings just like you and is connected now, my ISP provides 50Mbsp of speed, but the ethernet and wifi non the router is only 5Mbps, what am I doing wrong? Please advice, thanks.
With LZO Comp set at yes, my speed on a fiber network was 35 down. I disables the compression and speed went to 143 down. Thoughts???
The Openvpn option can be configured on a WRT1200AC too ?
I have Nord and the Linksys3200 can they still be connected? This video is pretty old.
What if i wanted this to act as an extender would the vpn functions still work?
As you finish status and go to OpenVPN it says Client: WAIT ....... But it appears to be stuck, yet I can make other adjustments and move the scroll bar. Any answers?
Question for you, I'm trying to set up either a seperste guest VPN network or make my 5g network a dedicated VPN. I have an Asus RT-AC66U B1. How would you recommend I go about that? I'm assuming install dd wrt but I can't find anything user friendly. Any way you could help me out?
How can you remove the dd-wrt program from the router if you decide to go back to factory? I have tried resetting back to factory within in the router and updating to the factory firmware but nothing ever happens. Pushing the reset button on the back also has no change.
I will be traveling to Italy for a few months in Sept. Do I just cannge to a site close to where I'm staying,or can I stay connected to the USA site?
Can you add multiple vpn locations ?
Ok so I setup everything just like you did in the video I checked it 4 time so when I go to status it says Client : Reconnecting int_instance
What does this mean
I love DD-wrt but wifi is very unstable ,I prefer lede as it gets frequent updates and wifi is super stable on the LEDE on my wrt3200acm
I followed the instructions however it does not work, reason being there is no option to input the local service provider’s user name and password. Can you guide me where to stick in this info please. Thanks.
Can you add into this config a PiHole? I already have and love my PiHole, and want to upgrade my ASUS routers to do-wrt, and get a vpn. Just not sure how to make it all work together.
I have a Q! How can I set up a VLAN, for the same router? The thing is that my LAN is not working when I connect the VPN. Plus it doesn't work at all (Not VPN connected) when connected to my company cable box. Can you help me? or do you know where or who can help me? THANKS BTW! you totally rocked!
yeah but what if your looking for a server for use on xbox? You have issues with that server then you have do all these steps over again? Too much of a headache.
Hello it works on WRT 1900AC router ?
I just need it cause I’m tired of getting booted so hope this works
You
Facts did it work
I have wrt1900acs
I lost the internet connection when I updated the firmware !
Any help please!
is there a way to have a dual-band or tri-band router use the VPN on one of the 2/3 networks? (IE have my 5Ghz network be the VPN, while the others are normal connections.
If I wanted to stop using the VPN do I just simply turn it off? Because I can't play COD because not everyone has a VPN
What would be the equivalent for OpenVPN server of the script from NordVPN you pasted in the additional config box?
I am using OpenVPN Access Server on a linux VPS as my VPN server and a linksys wrt3200acm running dd-wrt vpn as VPN client.
I have a Netgear R7000 but need to install it as a secondary router. The DD-WRT Firmware I am using is DD-WRT v3.0-r44715 (11/03/20) So the description does not match in some fields. I also need to set the router up as secondary router as my ISP one is (and should remain) as the main one. I would appreciate some guidance setting up the NordVPN as I was not successful and resigned. Anyone can help or knows where I can get support in doing so? Thanks
Thanks, Byte My Bits, very useful video and I appreciate your calm and easy to understand voice. I think I will get NordVPN with your link and discount. Thanks again
I tried installing VPN on my router and I bricked it
have you unbricked it and how
He who fails to plan, plans to fail.
Put it in the microwave for 5 minutes.
Seriously don't do that. I was trolling.
What if after installing the new firmware you cannot login to the dd-wrt admin?
Evidently the DD-WRT database has been down for some time now
"Note: Due to maintenance work the router database is currently not available. " I have seen this message for 2 weeks now . 6/8/18
Yes, I'm glad we were given the direct link in the video so we could bypass the downed database.
I had the same prob last night. I emailed the contact us people and had a link to the dvd-wrt firmware in my inbox the next morning. I feel better now that I did it this way...go and send them an email. If not, pm me and I’ll send your the email from them...with all the disclaimers of course
Nice thank you. Now i have a guest wifi actived but i don't want this guest have vpn actived, how make that please ? VPN for primary wifi network but no vpn for guest wifi how make ? THX
Good nightl 1 need help please 1 have done everything that the video says verbatim but 1 stillcan't
connect my vPn. please help me
i had all of this working before i moved, then i moved got a new modem and now the router wont connect to the internet. under the status theres no connection. i flashed the router back to factory linksys firmware everything works fine. flash back to ddwrt and it wont connect. what could the difference be between the old modem and my new one? my new one is a tplink ac1750
I went through all your steps and it was working in the beginning, but now it won't connect to the server. I do not get the connection succes at the status page. I set back the router to factory settings and went through the setup again. I did it your way and NordVPN's own way, but still nothing.
Any clues on what I can do?
I think you should do a video on how to route certain device to the VPN or direct to internet.
How do you open this up in a text editor, every time I download it nothing shows up
Thank you worked great. Although I've noticed my plex server can't be accessed from wan and my ports are forwarded to 32400 and 32401 with my local ip address. Any suggestions on how to remotely access plex with nordvpn on my ddwrt?
Port forward on VPN is needed if your VPN profider supports it or port forward to your ISP Gateway to just bypass the VPN all together
fastjp72, I haven’t tried wan access setup for PLEX on my Nord VPN router yet. Using the DD-WRT settings I am able to selectively set VPN on/off for each device. If I select off for the PLEX servers does that sound doable?
It worked like a charm!
Can you add multiple countries so you can choose? Or must this different.
I've got Nord VPN on my laptop, i've discovered its next to impossible to use any external monitors while in the VPN mode so pretty much anything you wanna watch like netflix has to be watched on the computers own screen, while installing nord on a pc is as easy as pie this is pretty complicated and seems to tie up the main router, i need a solution that involves a blue peter style vpn router, ie this is one i made earlier and works alongside my ISP router so i can use the default internet most of the time
Hey good video, have you done one for WRT 1900ACS Linksys/; is it poossible do connect a vpn to this router?, thanks!!
Hello! Do you need to have your computer plugged directly to your router in order to this?
Does the router setup have the “kill switch” protection?
P.S. I am currently using Nord on a Mecool M8S Pro L android TV box. It works great for my streaming of Zion TV, Showbox, etc. However, it's blocking my Netflix. Is there a setting in Nord so it doesn't block Netflix or Amazon Video or will moving Nord to my router and off the android tv box resolve it? Thanks.
I have a hp chrome tablet and already have my nordvpm on it as well as my firestick but here's that word, But. I can't get my notebook to share the nordvpn to my Xbox one how to find away to get my internet to share from my Chrome notebook?
Question: i have a AC duel 2.4/5 Band router and I want Nord only on one of them, is that possible? Additionally what about anything physically wired to my router IE my smart tv/Xbox?
I have a question can I use my phone bc I don’t have a laptop rn so I am able to connect my nordvpn though my phone to my ps4 or do I have to use my hotspot to be able to do that ???
Where can I buy a router already ready for VPN????
Will this work on a LINKSYS WRT 1900AC already running DD-WRT Firmware? Anything different needed? Thank you.
no and do not follow this guide... there are some differences between this vid and NORDVPN's website if you look up your specific firmware. go to nordvpn's home page then navigate to help > connectivity > router > then look for your firmware. their instruction set is so easy to follow it is seriously "idiot proof." i think they sat down a bunch of 8 year old kids and 70 year old grandmas and asked them to follow the steps. if they could do it, then they posted the instruction set.
I'm not sure why you have remote-random in the config when you've set it up to only use a single server.
Are there any other good Wifi VPN Routers? This one is expensive
Deissek there are very good prices on the model under this one that is slightly weaker but prob good enough for most people and its considered more stable than the 3200. The Linksys wrt1800 if you can find them, they might have been resplaner by the 1900ac now. The 1800 has been on sale several times for prices down to 120usd. Ive also seen the 3200 on sale for 180. If i check newegg.com now I can only see diffrent versions of the 1900ac for prices ranging from 100 and up. Don’t know status of ddwrt compatibility though. You could prob get a 1800 ac on ebay for a damn good price though and theyre considered one of the best and most stable for ddwrt fw.
I've been getting errors about reconnecting init_instance, and it's annoying me as I've followed everything on this video
Me too. Did you fix it?
Have you more than 1 router on your network? I got this error because my two routers were using the same IP address and causing a conflict. See my post.
can i do it on stock tp link firmware?
installing NordVPN on Linksys Router provide Tune Spilit option
Great video Byte, much appreciated!
why would it require ip6 to be turned off? I thought ipv6 was a thing of the future
Great video, much love
Hi i do this same as you on linksys 1900acsv2 using DDos-wrt but I’m getting dns leaks when I check online is this right a reply from you would be very helpful.
Hey Jason, I was wondering if you knew a way you could run Plex while using NordVPN to access your server outside of your network?
What you fail to say...top speed is about 100 , even if your paying for higher...also NORD refuses to configure a Wireguard Client for your router
I wish I knew what I was doing wrong, I followed it exactly to the description but the status doesn't change and nord says i'm unprotected. I think I'll try express vpn as they offer their own firmware flash file.
followed this method meticulously and it didn't work but in the search for answers I looked into the flashrouters way and wow so much easier and a perfect solution.
they say they don't keep any logs but how is that enforced?
Wtf. Have no internet after addin GB file and reboot. ??? Cannot set up anything on the dd-wrt page. Internet will not come back on. Did everything exactly up to that point
I have the exact same router and tried to set it up but connection wasn’t successful. I tried to reset my Linksys to factory settings but the ddwrt firmware couldn’t be deleted. Anyone know a workaround? Can the ddwrt firmware be reinstalled?
Me too, it's a nightmare. I must have rest (10 seconds), done 30-30-30, and installed the Linksys factory firmware, probably around 20 times before it eventually reverted.
I have ac2900 rt86u no dd-wrt firewear for it
Unfortunately I cannot get my router to work with nordvpn and I follow all the steps... Would someone be kind enough to help? Thank you
Excellent help presentation. Thank you!
Got a question. I downloaded the DD-WRT software you recommended and went through steps. But I never got a "connected" confirmation, so I called Linksys and they say now that I have downloaded this "firmware" they cannot service the device. Your thoughts? Is there any way to remove the DD-WRT software so that they can access and set up the router? Thanks
I had the same problem. It seems when you copy and paste the text from the UDP file, it adds a few extra lines before the text begins. I deleted those lines and now have contact.
done all this but than my internet name changes and the router didn't have a password so anyone can join my internet can anyone help me with this
I have tried several times to load the DD-WRT firmware on my Linksys WRT3200ACM but at the end of the firmware load I get the message that I have lost internet contact .. and goes no further! Any help.
TD did you sort this out?
Did you setup a second IP Range separate from the ISP configured one (usually 192.168.xxx.xxx)?
Jeson, great video, I recently did this to my Netgear Nighthawk and love it.
DD-WRT firmware with Nord even lets you specify which devices you want to “pass-through” the router without being protected by the VPN.
The default is set to every device, you simply “opt-out” if you choose. This feature is nice if you don’t want to run a dual router setup. I’m happy to see you recommending Nord, too many pluses to list them all. Two most important to me are minimal speed lost and the no log policy. Nord is based out of Panama (outside of the “five-eyes” jurisdictions.
exactly. NordVPN is steadily rated one of the best VPN in every category.
I have a Night Hawk XR300 I couldnt find the firmware download listed on that dd-wrt site was there another website you found yours on?
@@briangibson1765 not that I’ve seen.
Does this support kill switch?
Don’t bother with the discount link. It doesn’t give a discount.
Any chance you travel? LIke to my house and set it up?
What if my router is a cox cable router