Theses guys are so hard working, they have to work till it’s dark to get the truck back on the road, we’ll done guys, we need more like you in this world
I watch these guys all the time and they have all the skills , equipment, knowledge and guts to pull any job off. I live in UK and these guys have what the UK need. People with skills. The UK is now just full of warehouses with goods being brought in and distributed. No one manufactures anything or fixes anything anymore.
Iam sure you don't see this kind of job in next generation , our mecanic did all this kind job in 30to 40 years ago (cos we didn't have any modern tools and we had a lots of strong man ) but nowadays everything in my country change and repair slowly gone unfortunately !
So you removed the shaft, removed an uneven amount of material on the lathe, then literally welded half a bead of new material to make the shaft a tight fit again?? Not sure how long that fix is gonna last...
All the credit goes to these Pakistani mechanics but I sure wish these guys bosses could afford some steel toed work boots because working in open sandals in cold weather is asking for a lot of broken toes and other foot issues.
For the love of god put the ground on the part and not the lathe!!! The bearings of that lathe probably already look like the shit you arc gouged out of the side of that part.
Автор ну хоть ты подскажи перед тем как снимать очередной ролик что ребят почистите резьбу на болтах и стремянках ту же посадку перед запрессовкой железными щетками И перед сборкой помазать ну типа нигрола резьбы и посадки. А то бросят в грязь в пыль и собирают вместе со ржавчиной обратно. Смотреть жалко на такое неуважение к деталям и к труду в процессе сборки. Неужели так долго это сделать. Или настолько пофигисты. И так сойдет.
Typical repair to destroy later video. You wouldn't need to repair your trucks if you loaded them correctly. 20 ton truck carrying 40 tons is not the answer. Definition of insanity, doing same thing over and over expecting different results
Just use some oil and grease to put it together and those housings should rotate freely not everything needs to be put together with a bleeding great hammer, terrible workmanship.
все пишут смазать резьбу и почистить ,вы не понимаете ржавчина и песок это как фиксатор резьбы. они он сколько грузят ,а если открутиться. а песок это надежно
What a bad job. Incredible the dirt of the place. The men work squatting or sitting on the floor, wearing filthy clothes and wristwatch. Mechanics repair engines and equipment by throwing the parts on the dirty floor, there's garbage everywhere ... Mechanics don't wear protective gear. Impressive the dirtiness of the place… And mechanics work smoking or talking on cell phones … Also, operating a lathe or sanders using long-sleeved shirts or wristwatchs is extremely dangerous.
Theses guys are so hard working, they have to work till it’s dark to get the truck back on the road, we’ll done guys, we need more like you in this world
mmlllp0
I watch these guys all the time and they have all the skills , equipment, knowledge and guts to pull any job off. I live in UK and these guys have what the UK need. People with skills. The UK is now just full of warehouses with goods being brought in and distributed. No one manufactures anything or fixes anything anymore.
Iam sure you don't see this kind of job in next generation , our mecanic did all this kind job in 30to 40 years ago (cos we didn't have any modern tools and we had a lots of strong man ) but nowadays everything in my country change and repair slowly gone unfortunately !
Human laborers too expensive better than just have a brand new part and bolt it on
@@steamdriver6964 that's a very good point. Also cuts the labour cost I suppose.
I guess that qualifies as all in a days work? No thanks, gave those kind of hours long ago but kudos to them for the work they do. 😁👍🇺🇸😁
You guys are the best workers I've ever seen!
From Pakistan
Where do you live dave?
@@duramax78 here, lol
Respect for these hard workers!! Nice vids
официальный дилер прям, даже гайковерт есть))
Super. Mucho trabajo duro y mucha sabiduria. Verdadera economía circular.
It’s no wonder they break axels wheels etc so often with how much they overload the vehicles.
молодцы мужики как можете так и работайте удачи
Like your work. Thank From Thailand.
Hi always like your work attitude hard working man stay safe out there bro regard
Semangat semua pekerja menajupkan. Salam dari indo
Amazing job I like it
So you removed the shaft, removed an uneven amount of material on the lathe, then literally welded half a bead of new material to make the shaft a tight fit again?? Not sure how long that fix is gonna last...
Makes you scratch your head.
Muy buen trabajo, y desde que empiezan hasta que terminan
Terlihat seperti ini sangat berat, namun mereka tetap semangat 👍🏻
Сколько смотрю твои видео никак не пойму, в Пакистане проблема с рабочими перчатками что-ли?
Какие перчатки? Они в токарных станках варят, а ты говоришь..
У них лозунг, с презервативом ни ебля,а в перчатках не работа!!!
гайковёрт есть-это уже космические технологии!!!
All the credit goes to these Pakistani mechanics but I sure wish these guys bosses could afford some steel toed work boots because working in open sandals in cold weather is asking for a lot of broken toes and other foot issues.
Привет всем !!! Как всегда лайк !!💪🤝👍
ТОЛЬКО ИИСУС ЕСТЬ ПУТЬ, и ни в чем другом нет спасения; ибо нет другого имени под небом, данного людям, которым надлежало бы нам спастись.
Деяния 4:12
Another Awesome VideO As Always * 💋
❤
Love your Channel 💙
Parabéns pelo trabalho...
Isn't welding on that lathe going to knacker the lathe bearings up????....
Yup
They overload and push there trucks to the max. But luckily a mechanic will always have work to do
Very good, congratulations pakistani mechanics
Как всегда 👍👍👍🤣🤣
nice job but hard to watch that the parts wern't cleaned :\
Amaizng job i like its
Mantap sekali 🇮🇩♥️👍🏼
They need a line boring & bore welding machine
Greetings from türkiye to our brothers
Hello, Aslaam o Alaikam
Bro where you from
Peshawar or Islamabad or other ?
Very nice
oh❗😳 nissan diesel Bigthumb❗☺️👏
Usually, these fellas clean their parts up real good before reassembly, not this time!
Must of got a wage cut.
নাইচ
CHICLAYO PERU 🇵🇪 🇵🇰 MY BRO 🙋 👪 🤔
One day I'll visit Peru.
Perhapes
Cheers from Los Angeles!
Good
" TRILLA, DALE A LA CHOTA", JAJAJAJAJAJAJAJAJSJA
I respect everyone who were involved in this Seriously the best piece that i ve ever seen on RUclips 💌 Hate off to well all 💟 love your videos ❤
Раму грузовика поправить можно - а кривой удлинитель на гайковёрте - не судьба видимо )))
Отлично
Good video. Can anyone tell please what is the purpose of this "balance shaft"?
Thanks.
It's a pivot The spring ends touch each axle so on one axle goes up and the other one goes down or vice versa the spring can pivot
@@steamdriver6964 Thanks for your kind reply. Keep it up.
Good job fellas!!!i. Terrific video!!! I wish I could buy one of your hammers off of you..
Болтоверт! Да вы шутите? Отработочкой хоть бы резьбу на стремянках смазали то.....
Ёпамать, охуенный сервис есть гайковёрт и трещётка👍
For the love of god put the ground on the part and not the lathe!!! The bearings of that lathe probably already look like the shit you arc gouged out of the side of that part.
عمل صعب . لكن كان الافضل استغلال الفرصة ووضع قطع جديدة
يسوع المسيح ، هو الطريق الوحيد للأب والإله الأبدي ، انظر إليه اليوم ، دعه يدخل قلبك ، وسيمنحك روح الله المقدسة.
👍👍👍
Таким можно и самолёт доверить.))
ТОЛЬКО ИИСУС ЕСТЬ ПУТЬ, и ни в чем другом нет спасения; ибо нет другого имени под небом, данного людям, которым надлежало бы нам спастись.
Деяния 4:12
Автор ну хоть ты подскажи перед тем как снимать очередной ролик что ребят почистите резьбу на болтах и стремянках ту же посадку перед запрессовкой железными щетками И перед сборкой помазать ну типа нигрола резьбы и посадки. А то бросят в грязь в пыль и собирают вместе со ржавчиной обратно. Смотреть жалко на такое неуважение к деталям и к труду в процессе сборки. Неужели так долго это сделать. Или настолько пофигисты. И так сойдет.
ТОЛЬКО ИИСУС ЕСТЬ ПУТЬ, и ни в чем другом нет спасения; ибо нет другого имени под небом, данного людям, которым надлежало бы нам спастись.
Деяния 4:12
Agreed a few extra steps, might make it a alright job.
@@duramax78 Переведи.
VERY POOR WORKMANSHIP..UNPROFESSIONAL...BUTCHERS
Обычно они перед сборкой все вычистят и помажут , а тут на отьябись собрали 🤷♂️
Use a surplus
Typical repair to destroy later video. You wouldn't need to repair your trucks if you loaded them correctly. 20 ton truck carrying 40 tons is not the answer. Definition of insanity, doing same thing over and over expecting different results
👍
ТОЛЬКО ИИСУС ЕСТЬ ПУТЬ, и ни в чем другом нет спасения; ибо нет другого имени под небом, данного людям, которым надлежало бы нам спастись.
Деяния 4:12
👏👏👏👍👍👍
Determined guys wearing pyjamas and sandals.
Fix anything !
Feixe de molas nestas grossura nada aguenta.quebra mesm
i bet there has been some broken toes and feet over there .
Just use some oil and grease to put it together and those housings should rotate freely not everything needs to be put together with a bleeding great hammer, terrible workmanship.
Бл на новом станке варят) все с грязью, руки из плеч растут но культуры не хватает конечно)
ТОЛЬКО ИИСУС ЕСТЬ ПУТЬ, и ни в чем другом нет спасения; ибо нет другого имени под небом, данного людям, которым надлежало бы нам спастись.
Деяния 4:12
Harley dingwalli.
Hard graft.
все пишут смазать резьбу и почистить ,вы не понимаете ржавчина и песок это как фиксатор резьбы. они он сколько грузят ,а если открутиться. а песок это надежно
That will tear the thread apart.
👍🇪🇨
Send me yalls shoe size so i can buy yall some boots from Wal-mart🥾
What a bad job. Incredible the dirt of the place. The men work squatting or sitting on the floor, wearing filthy clothes and wristwatch. Mechanics repair engines and equipment by throwing the parts on the dirty floor, there's garbage everywhere ... Mechanics don't wear protective gear. Impressive the dirtiness of the place… And mechanics work smoking or talking on cell phones … Also, operating a lathe or sanders using long-sleeved shirts or wristwatchs is extremely dangerous.
Hey that’s calgarys N.E.
@@duramax78 And where is it?
Bahut mushkil kam hai
ТОЛЬКО ИИСУС ЕСТЬ ПУТЬ, и ни в чем другом нет спасения; ибо нет другого имени под небом, данного людям, которым надлежало бы нам спастись.
Деяния 4:12
🇪🇨👍
ruclips.net/video/wwUz8uGZsgw/видео.html&ab_channel=Rolnik%C5%81ukasz /polska wersja
Stop sending tanks to Ukraine.