Looks like those Yota's I see comin down the Mountain to get gas cross from my house every day during the summertime...My back yard is basically the Mnt Hood National Forest, Lots of badass trails here!...though after 2020 they are a bit burnt..sadly.
thanks for the great ideas. You made my start to build my very first own build. It will be an oshkosh m1070. Full steel chassis and sizes a adapted to fit the biggest 1/10 crawlers. A truck with real scale compared to the trx 6 hauler. Nice truck but to small. So thanks again for making me build a monster 🤣🤣😉😉
This helped a hell of a lot, glad to see you better too. Said it once and I'll say it again. Best rc channel out there. Front bumper looks amazing too. It could be a little expensive, axle wise, but a 6x6 would be really neat. Maybe like a wrecker or something like that?
Great project, I really liked how practícal and accessible it was. Congratulations for You great work. I don't even speak English, but between translate and what You show, it is very clear.👍
You need to switch the links around at the chassis. It will flex significantly better because it's the correct "geometry" I absolutely love the build, BTW... once I get a welder, I will be trying to make one as well. Keep up on the awesome content, man!
What’s up brother always good see what your building! I can’t wait start building some sliders and bumper for my rigs! Damn bro you see that new CJ Jeep body axial dropped! I wait try snag just body haha 😛 rigs looking sick my man 🤘🏻💯
I did see that new CJ and I want it as well!! As soon as I saw it my mind went crazy thinking of what I could do with it. I might get one when they sell just the body.
Brother , if you get your hands on a fastlane ford body (about 1/7 scale). I’d love to see you bring that to life…. And not just because I’m currently working on one😅
I do have plans for a 1/6 scale but it is going to be very different than i have seen or been able to find. I just started to collect the parts so it will be a while until I build it.
All good, I’ll be tuned in. My profile pic is the unit I specifically speak of. Hopefully one day this channel will be able to help your projects out. You more you do, the better you get. The better you get , the more recognition you will receive. This is a proper RC channel!
Which welder you using? I bought a cheap Easy-Flux 125 Amp Welder to weld my custom 2.5" X pipe exhaust system up for my Townie....would be cool if I could use it for custom body parts for the UDR I'm saving up for
I'm using a gas mig welder that I have set to run on 110. I think you could definitely use that welder. Just have to clean a bit after but it will work for sure
You should show bending the tube/round stock,what your using to bend it? I wanna build my own bumpers but can’t find what to use to bend 3/16 rod. I can’t afford the $400 bender they make for doing this. Well I can but I’m not going to lol.
Авто/Мото
Anything you do we will watch. God bless.
Thank you so very much!! You are awesome!!
Looking good great job
Looks like those Yota's I see comin down the Mountain to get gas cross from my house every day during the summertime...My back yard is basically the Mnt Hood National Forest, Lots of badass trails here!...though after 2020 they are a bit burnt..sadly.
Depends I think it’s perfect myself! ❤scratch built damn good! 😊
Looks good bro!
Isopropyl alcohol or acetone will remove sharpie from metal surfaces. Thanks for the great how to videos!
Off subject here but what's everybody's best results for removing paint and leave a clear body?
Rock bouncer!!!
😮 You're build looks really good. I cleen sharpy off my table with alcohol. Work pretty good just a little bit of elbow grease
Wow awesome video, and cool rc car 👍👍💯
Spraying Carb cleaner or brake cleaner on my stanless table removes sharpie marks
It will work. Might fade the paint a little on the table but that's a non issue.
thanks for the great ideas. You made my start to build my very first own build. It will be an oshkosh m1070. Full steel chassis and sizes a adapted to fit the biggest 1/10 crawlers. A truck with real scale compared to the trx 6 hauler. Nice truck but to small. So thanks again for making me build a monster 🤣🤣😉😉
That sounds like it's going to be awesome!!... Please keep me updated on your progress because I'd love to see how it turns out!
@@WafflesRC-pb4nt np 😁 going to be epic
6 x 6!
great rc content! bro it would be great also for the future contents if youre up to brazing and making tube chassis 😁
This helped a hell of a lot, glad to see you better too. Said it once and I'll say it again. Best rc channel out there. Front bumper looks amazing too.
It could be a little expensive, axle wise, but a 6x6 would be really neat. Maybe like a wrecker or something like that?
Great project, I really liked how practícal and accessible it was.
Congratulations for You great work.
I don't even speak English, but between translate and what You show, it is very clear.👍
Thank you very much!! I'm glad it was helpful.
Great awesome builds. Been here for a while. Waiting for a tow truck wrecker build possibly. Keep it up love the videos. 😄😄
Glad to see you up and about. I am always glad and happy to watch a master at work. Thank You.
You need to switch the links around at the chassis. It will flex significantly better because it's the correct "geometry"
I absolutely love the build, BTW... once I get a welder, I will be trying to make one as well.
Keep up on the awesome content, man!
Thank you very much!!
Thats very crafty bro build a double rc trailer
Great job on those bumpers and roll bar. Still waiting to see a pulling sled or some tug of war action 😎🍿
What’s up brother always good see what your building! I can’t wait start building some sliders and bumper for my rigs! Damn bro you see that new CJ Jeep body axial dropped! I wait try snag just body haha 😛 rigs looking sick my man 🤘🏻💯
I did see that new CJ and I want it as well!! As soon as I saw it my mind went crazy thinking of what I could do with it. I might get one when they sell just the body.
I've been looking forward to seeing more videos. Thanks and keep up the great work.
Brother , if you get your hands on a fastlane ford body (about 1/7 scale). I’d love to see you bring that to life…. And not just because I’m currently working on one😅
I do have plans for a 1/6 scale but it is going to be very different than i have seen or been able to find. I just started to collect the parts so it will be a while until I build it.
All good, I’ll be tuned in. My profile pic is the unit I specifically speak of. Hopefully one day this channel will be able to help your projects out. You more you do, the better you get. The better you get , the more recognition you will receive. This is a proper RC channel!
Supper cool
Love the builds I like to make one for my hard body Jeep tops. For my crawlers.
I’m trying to make my own homemade pulling truck! Would like to see what you come up with!!
How about building a ladder rack for a work truck? Either on a new build or on one you already have?
Good off takes it off obviously or wd40 after it sits for a day or two
Would love to see you build an off road rat rod, let your imagination run wild and see what you could come up with
auto lacquer thinner will take it off,,or sander damn sure will
haha ya I'm about to just paint over it honestly
Nail polish remover will take the Sharpe off your bench.
I’d like to see how how to do a pulling truck
Tube chassis 4 link f/r servo on axle buggy
I would love you to build a 6x6 Toyota
Use monster energy drink to get the sharpie marks off
Which welder you using? I bought a cheap Easy-Flux 125 Amp Welder to weld my custom 2.5" X pipe exhaust system up for my Townie....would be cool if I could use it for custom body parts for the UDR I'm saving up for
I'm using a gas mig welder that I have set to run on 110. I think you could definitely use that welder. Just have to clean a bit after but it will work for sure
@@WafflesRC-pb4nt awesome, I’ll have to give it a go once I get the truck
What welder you using?
I'm using a Vulcan gas 110v welder from Harbor Freight
Good job 👌👍 like your video 💯 in your RUclips channel 👍💯🔧🖋️🪄
Rubbing alcohol will take that sharpee off
You should show bending the tube/round stock,what your using to bend it? I wanna build my own bumpers but can’t find what to use to bend 3/16 rod. I can’t afford the $400 bender they make for doing this. Well I can but I’m not going to lol.