Iv just finished printing out the file and found there is a piece missing its the hammer plate that sits behind the receiver between the two thin panels. Have you still got the original file looked on thingyvers and it's the same.
there's a model on thingiverse for that piece... I can't really find it now unfortunately, but in the remixes of the original model you'll find a piece that looks close enough (it's actually probably better)
Fantastic job, but the angle of the tube holding the green LED not matching with the barrel just drives my OCD through the roof! could have just straightened it up!
When I'm opening the STL files in FreeCAD, the measurements seem way to big. The SteyrFrame for example is over 30 cm long. Does anyone know where the problem is and how to solve this?
Hello, I have a lot of questions about the handle. Is it a 3D print or a cast? If it's a 3D print, what brand of resin did you use? If you did the coloring yourself, can you tell me what dyes you used and in what proportions?
@@francoisthomas1845 Its just elegoo clear 3d print resin, tinted with orange alcohol ink in the vat, then given a heavy lacquer coat after curing. Can't remember the proportions, it was trial and error.
@@randommodeler WOW - That's a lot less than I thought. Great news. Also, any idea if my brand new Elegoo Mars Pro 2 will manage to print all the pieces? Not sure what the longest/biggest piece is???
@@mrg2904 I printed it in multiple plates on a small 5.5" printer. It took me about 3 full plates + 1 for the handle with clear resin. I don't think you'll have any issue with the mars pro 2. Just take your time, arrange the pieces carefully, in a couple of days you should have your blaster ready for sanding
i can say i hate this gun . its a revolver mixed with a rifle chamber . like its nice and all with separate triggers but the barrel ... it should have 2 barrels one for the revolver and one for the big rifle cartridge
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Great video - good explaination and the final model loooks fantastic.
The best I've seen so far!Great job!
Your build looks incredible. I used your video as guidance as I built and painted my own blaster. Thanks for putting the video together.
Love your version and the attention to detail is amazing
I can't wait to get this printed !
Stunning work...!
The blaster looks incredible! Thanks for the great video!
Very clean work, wonderful modelling my friend
This is amazing! Great work!
Looks amazing and a very good video. Your narration is helpful too. Thanks for sharing!
Excellent Video !! I love your step by step process to a finished prop , Awesome !!
Wow, Amazing video and work on that iconic movie weapon
Killer build! Looks great!!
Your work looks amazing my friend.
The fit and finish looks great.
New subscriber. 👍🐺👍
Wow great video! I love your BR Blaster! Excellent work! Made me a subscriber! Thank you for sharing!
Great video! very clear and the end result is impressive, just started my own kit hope it turns out as well as yours !
Which black paint and what primer did you use on this?
Awesome video, hopefully start mine in a few weeks, great inspiration 👍
Nice idea for a double barrel .410 handgun
Thanks for sharing!!
About how much does it weight when assembled?
Love the video! Can you recommend a brand and where to buy grqphite power? Thanks!
are in this kit the bullets standard included?
Iv just finished printing out the file and found there is a piece missing its the hammer plate that sits behind the receiver between the two thin panels.
Have you still got the original file looked on thingyvers and it's the same.
there's a model on thingiverse for that piece... I can't really find it now unfortunately, but in the remixes of the original model you'll find a piece that looks close enough (it's actually probably better)
what paints did you use for metal and the black please mate
Fantastic job, but the angle of the tube holding the green LED not matching with the barrel just drives my OCD through the roof! could have just straightened it up!
Gran bel lavoro !!! 👍
somebody should make a blade runner blaster with neopixels and proffie/cfx/ghv3 soundboard with effects
When I'm opening the STL files in FreeCAD, the measurements seem way to big. The SteyrFrame for example is over 30 cm long. Does anyone know where the problem is and how to solve this?
probably a problem with the units. do you have the software set to inches?
@@randommodeler That did the job! Thank you so much!
This is what it looks like when done with Alclad paints and a better handle resin colour:
i.imgur.com/7Ue002i.jpg
i.imgur.com/hfWrdUE.jpg
Hello,
I have a lot of questions about the handle.
Is it a 3D print or a cast?
If it's a 3D print, what brand of resin did you use?
If you did the coloring yourself, can you tell me what dyes you used and in what proportions?
@@francoisthomas1845 Its just elegoo clear 3d print resin, tinted with orange alcohol ink in the vat, then given a heavy lacquer coat after curing. Can't remember the proportions, it was trial and error.
U sold me to print this. What screws were u using?
they are M3, various sizes. The 3d model contains a BOM!
Hi. Great video. I'm just about to start printing but was wondering how much resin does it take?
oh wow, that's a good question. I don't really remember as I used 3 different left over resins. I'd say about 500ml + the handle
@@randommodeler WOW - That's a lot less than I thought. Great news. Also, any idea if my brand new Elegoo Mars Pro 2 will manage to print all the pieces? Not sure what the longest/biggest piece is???
@@mrg2904 I printed it in multiple plates on a small 5.5" printer. It took me about 3 full plates + 1 for the handle with clear resin. I don't think you'll have any issue with the mars pro 2. Just take your time, arrange the pieces carefully, in a couple of days you should have your blaster ready for sanding
@@randommodeler you’ve been VERY helpful. Thank you
@@randommodeler sorry, one more thing. Do the files come with supports? ie Is it download files, plug into printer, press go?
I just printed the gun and I can't find the gun trigger that fires the bullets
🅿🆁🅾🅼🅾🆂🅼
i can say i hate this gun . its a revolver mixed with a rifle chamber . like its nice and all with separate triggers but the barrel ... it should have 2 barrels one for the revolver and one for the big rifle cartridge