This is absolutely hands down THE most informative video I've found on this particular subject. Thank you for your knowledge and know how. I for one REALLY APPRECIATE IT! I love how you showed all your work not just clips. Thanks again brotha! 😊
Thank you SO much. I had been on the phone with Bissell earlier and she wasn't able to help me. Everything she suggested, I had already done. She said I need to take it in for repair or probably needed a new model. Watching your video, the very first thing you mention was the thing I hadn't done. There was a little lint ball preventing the water from going through the sprayer. Thank you again!
Thank you! I am having issues with my carpet cleaner, DeepCleanProHeat2x professional Pet 17n49), dispensing solution (again) after loaning it out and found this video very informative. A few months ago I clogged my lines because I mixed OdoBan in with my Bissel cleaner. I know. Bad move. As I used the machine I noticed white clots forming in the tank which ultimately clogged all my water lines. I had to completely disassemble the machine to access all the lines and flush every line and valve. It was a HUGE hassle, but after putting it all back together, it worked again. I DO NOT want to have to do that again…. Ever. The pump would be a much easier fix.
Thank you so much for this video, I’ve been searching everywhere to find my exact model of Bissell to troubleshoot and you delivered with professionalism and ease. My issue is that my bridge rectifier neutral/red wire connector tab (or whatever it’s called) snapped off. If I order a new bridge rectifier, how would I replace that in this machine? I’m intimidated by the amount of wires and disassembly required. Thank you again!
The first to determine is if the brush is not turning because of the belt or is it not turning because the brushes have melted on the sides. You may have to open it up to see
Yayınladığınız videolar işe yarar bilgiler sağlıyor ancak video yüklerken en azından Türkçe altyazı imkanı ve diğer diller içinde aktif olsa bu ürünü alıp benzer sorunlar yaşayanlar için daha işe yarar hale gelebilir emeğinize sağlık
I am facing problem with hoover platinum power max for water spray and dispnseing. After motor change with agency I faced for this problem. Kindly for removable brush water running and spray normally. Please advise in this
Try my Bissell tips playlist- there are suction videos in the playlist, these units are very similar in operation and design I’m sure you’ll find something that can help. If not contact me again and I’ll see what I can put together
@monroevac Thanks for that. However, between that time and now I've conducted all those trouble shooting. I've since made mixture of bleach and vinegar and ran it through machine. It fixed. It seems chlorine in my tap water created some blockage so the mixture released it. It's the same for my hose, it wasn't spraying and I did same thing and after running for 1/2 hour it cleared. I'm now going to use distilled water (A/C drain water) or rain water.
Any chance doing a no spray on floor and hand tool for werthiem se9000 also seems the red flap inside the tank flips up PLEASE HELP I know these machines seem a lot identical to bissell PLEASE HELP
Check the red filter and make sure there is now hair or fibers clogging it - make sure the nozzle window is on securely. And also test for gaps between the lid and the dirty water tank
This is absolutely hands down THE most informative video I've found on this particular subject. Thank you for your knowledge and know how. I for one REALLY APPRECIATE IT! I love how you showed all your work not just clips. Thanks again brotha! 😊
Wow. Thank you for such a positive review. And you’re welcome 😊
Thank you SO much. I had been on the phone with Bissell earlier and she wasn't able to help me. Everything she suggested, I had already done. She said I need to take it in for repair or probably needed a new model. Watching your video, the very first thing you mention was the thing I hadn't done. There was a little lint ball preventing the water from going through the sprayer. Thank you again!
Awesome 😎 Always great to hear success stories- Glad ai was able to help!
Also don’t forget to subscribe.. almost at 5000 subs😊
Fantastic video thank you so much! We got a carpet cleaner at a thrift store and after watching this, I fixed it in about 10 minutes. Two thumbs up.
Thank you. I’m glad it helped
This gave me enough ideas and a little push to successfully fix an older bissell steam, thank you
Glad to help-
Thank you! I am having issues with my carpet cleaner, DeepCleanProHeat2x professional Pet 17n49), dispensing solution (again) after loaning it out and found this video very informative.
A few months ago I clogged my lines because I mixed OdoBan in with my Bissel cleaner. I know. Bad move. As I used the machine I noticed white clots forming in the tank which ultimately clogged all my water lines. I had to completely disassemble the machine to access all the lines and flush every line and valve. It was a HUGE hassle, but after putting it all back together, it worked again.
I DO NOT want to have to do that again…. Ever. The pump would be a much easier fix.
Man printed out a youtube comment thats the most dad thing i ever saw
Yeah, old school all day 😂
Thanks!
Much thanks!!!!!🙏
You’re welcome! thanks 🙏
Thank you so much for this video, I’ve been searching everywhere to find my exact model of Bissell to troubleshoot and you delivered with professionalism and ease. My issue is that my bridge rectifier neutral/red wire connector tab (or whatever it’s called) snapped off. If I order a new bridge rectifier, how would I replace that in this machine? I’m intimidated by the amount of wires and disassembly required. Thank you again!
You are welcome!
Do you know what would cause it to only spray for small intervals after turning it on. I can turn off and back on and it will spray some more.
Could be a s solenoid or the pump. But before that check for clogs
I was given over the spray attachment nor the base had water spray. So I b figure it is the pump
Bummer about the pump, man! That’s frustrating. Hopefully, it’s an easy fix - keep me posted on what you find out!
Yes sir I have a problem with my ProHeat turbo bristle the brushes will not spin we're not spinning they are not spinning
The first to determine is if the brush is not turning because of the belt or is it not turning because the brushes have melted on the sides. You may have to open it up to see
Yayınladığınız videolar işe yarar bilgiler sağlıyor ancak video yüklerken en azından Türkçe altyazı imkanı ve diğer diller içinde aktif olsa bu ürünü alıp benzer sorunlar yaşayanlar için daha işe yarar hale gelebilir emeğinize sağlık
Hmm I look into that thank you 🙏
All your work doesn’t go unnoticed sir, very much appreciated 🫡
You're welcome and thanks
Great job sir 😊
I am facing problem with hoover platinum power max for water spray and dispnseing. After motor change with agency I faced for this problem. Kindly for removable brush water running and spray normally. Please advise in this
I have pro heat 2x revolution is not bringing the water up from carpet
Try this video-
No suction in my Bissell Revolution
ruclips.net/video/Cr0NqDf_Y1o/видео.html
Do you have a video with preheat premier2x not suction? Thanx
Try my Bissell tips playlist- there are suction videos in the playlist, these units are very similar in operation and design I’m sure you’ll find something that can help. If not contact me again and I’ll see what I can put together
My Big Green Bissell is spraying from the bottom continuously without pressing the handle button.
hmmm- sounds like to solenoid needs replacing
@monroevac Thanks for that. However, between that time and now I've conducted all those trouble shooting. I've since made mixture of bleach and vinegar and ran it through machine. It fixed. It seems chlorine in my tap water created some blockage so the mixture released it. It's the same for my hose, it wasn't spraying and I did same thing and after running for 1/2 hour it cleared. I'm now going to use distilled water (A/C drain water) or rain water.
Any chance doing a no spray on floor and hand tool for werthiem se9000 also seems the red flap inside the tank flips up PLEASE HELP
I know these machines seem a lot identical to bissell
PLEASE HELP
Yea they’re the same unit- see myBissell playlist- look for Bissell 2x videos- if it’s not there I can always revisit the topic
Water not spraying out of attatchment
Visit my landing page on RUclips and look in the Bissell tips playlist. There are a few videos there on that topic
Water is not going to the dirty water tank.
Check the red filter and make sure there is now hair or fibers clogging it - make sure the nozzle window is on securely. And also test for gaps between the lid and the dirty water tank