The process of making a mirror ball. The last remaining mirror ball manufacturing factory in Japan.
HTML-код
- Опубликовано: 22 апр 2024
- The process of making a mirror ball. The last remaining mirror ball manufacturing factory in Japan.
👁Nissho Co., Ltd. 株式会社 日照
☎️ TEL：072-634-1231
🏠maps.app.goo.gl/oZbpdDqC1VHod...
🚩goo.gl/maps/y8QbAHApZxSSzfAR9
💌 Contact : processx2@gmail.com
📸 Copyright(C) 2022. Processx. all rights reserved.
想像の何十倍も手作業で驚きました！
実際に使われている所見てみたい、綺麗なんだろうな🪩
古いカラオケ店には
ミラーボールがあるよね
撤去されない
レーザーカラオケ機器
Not only they cut each mirror into plenty of circle, but the size gradually change as it reach the top of the ball. Insane job...
That's right G.
プレスで作った半球を合わせるだけだと思っていましたが、手作業なんですね。平面の円盤が半球になっていく行く様はまるでマジック！すごいなぁ。
I can honestly say I never even wondered how disco balls are made, yet I was totally mesmerised watching this. Very nice!
Very satisfying!
Dude... Shout out to handmade artisan disco balls. We love you, Japan!
へら絞りの技にはいつも見惚れてしまう。日本の職人さんの技術力の凄さよ
LEDでは出せない良さが有りますね。
贅沢な照明器具です。欲しい！
ミラーボールの工場もプロセスも、ミラーボールが使われるような所とは雰囲気が全く違うのが何か面白い。
These guys party hard after work.
思った以上に手作業が多くてびっくりしました😮
この作業量だとかなり高価なんだろうなぁ、樹脂ミラーじゃなくてガラス製だし
バブルの頃は相当売れたはず
ホールに光るミラーボールはほんとキラキラして最高なんだよな🪩✨🍸
I love how Japan can take anything and step up the game.
丸の形の鏡は、四角のタイプより高級感があっていいですね！
FRIDAY NIGHT essential 🕺🏻
I was surprised at how much is done by hand true artistians/craftsmanship 👏👏 ❤❤
I love to see craftsmen at work. I wish you success and a strong business.
difficult to watch someone wearing gloves so close to metal that could snag it on such a massive lathe!
And bending over it to turn it on
Странно, что никто не вспомнил Пакистан. Нельзя?
I imagine it'd be better than having ur hand snagged on it, no?
@@Selvepnea Risk of snagging a hand is much lower than snagging a glove. A snag rips off part you your skin. Bad, hurts but heals back up. A glove doesn't rip, it will pull you with it. Best case: it will rip your hand off. But it could also be your arm or basically your whole body under that ball... Wearing Gloves is great, except when it isn't.
赤道から極に向かってミラ―のサイズを変えているとは想像もしていませんでした
これからも素晴らしい仕事で日本のみならず、世界を照らしていってください
Interesting that the drive motor is contained WITHIN the sphere itself. I would think that would pose a bit of an overheating issue. The Harry Potter-esque music makes it magical! Thanks for sharing!
I'll never look at them the same again. A lot of work goes into making them. Great video!
You have never seen a disco ball in your life and now you never will.
Heck yeah! Keep the party rockin'! Thank you for making magic!
Increíble trabajo y esfuerzo, para un producto que bien conservado puede perdurar por generaciones como un auténtico tesoro por la artesanía fina aportada para su creación.
Mi más sincera enhorabuena 👏 👏 👏
ミラーボール大好きです🪩こんなに手間がかかってたんですね、勉強になりました👍
職人さんこれからも美しいミラーボール作り続けてください✨
The amount of handcraft for making these mirrored balls is impressive! Beautiful work and the process was surprising. My favorite video of yours!
manufacturing automation has left the chat
Máy móc thiết bị làm ra sản phẩm tuyệt vời. Khi hoàn thành món đồ rất đẹp mắt 🇯🇵👍.
Missed the interesting part with the internal motor.
良いもの見せてもらった
まさしく職人技ですね
Nhà máy sản xuất cầu gương của Nhật Bản, Tuyệt vời. Người Nhật làm ăn như ý 🇯🇵👋.
Wow, that there's so much craftsmanship in those!
Que trabalho incrível,pura perfeição!
I'm always impressed how the Japanese people worked with pride and quality. It's simply amazing.
Un grand merci pour la vidéo!
やはり、出来の良し悪しが有るのだろうか？
何もかもが職人技の結晶ですね
鏡を貼り付ける時に
少しでも傾いてしまえば光は綺麗に反射しないし
ヘラ絞りも、少しでも歪めば球体にはならない
日本の素晴らしい技術ですね
これは素晴らしいわ、
こういうのを残さないと💦、絶対に残しましょう💪🎵
Wow! So much better than every other mirror ball I have ever seen.
Beautiful!💜
This is just great.
que hermoso , saludos desde Argentina
素晴らしい。
お見事です！本当に鏡の破片を張り付けてるからミラーボールなんですね
Fine craftsmanship! I had no idea these were handmade.
まさかこんな手作業で作ってるとは思わなかった、職人の技がミラーボールみたいに光ってる。
Lindo trabalho ! Abraço de Brasil 🇧🇷
Parabéns!!!
Belíssimo trabalho ❤
look how small his metal spinning lathe is!!! amazing! @#$
ミラーボール生産では世界シェア90%以上なんですってね
すごいわね。
今の主力製品はライブや舞台などにある青緑赤のライトなんですわよ。
ライブの照明も作ってるんですね、ミラーボールは屋内しか機能しないから辛い所だな
世界じゃなくて国内でした
許してください何でもしますから！
Настоящие мастера своего дела! 👍
Великолепная работа!
Beautiful work !!! 😳👍
Belíssimo trabalho parabéns pessoal 👏👏👏👏👏👏👏
No wonder they cost so much with all of this hand made construction involved!! BEAUTIFUL!!! 🫥🫥🫥🫥👍👏👏👏👏👏👏👏👏👏
Simply fantastic! I love this thing, remember my youth
I loved this, it brings very nice memories from my teen age years in the late 80's. ❤
Now I need one for my home. Or maybe three.
😂👍
As far as disco balls go, that's the best looking one I've ever seen 👍
That was awesome!
Processus manuel incroyable ! Ca change des versions industrielles. L'œil du technicien est ici indispensable pour réussir du premier coup à former 2 demie-sphère ! Ces boules à facettes doivent valoir très chères.
今の令和時代にミラーボールの需要ってどこにあるんだろうか・・・・。守りたいこの工場。
Zeppとか行くと見かけるけどあれって交換とかしてるんかな…
クラブ（DJクラブ）とかにぶら下がってるけど、中国製だと思う。
値段を見てみたけど、直径50cmで日照製30万円、中国製1万円だって・・・
@@jyon4649中のモーターが壊れたら回らなくなるから その時は交換だね
ミラーボール専業って訳じゃなく、舞台照明等を扱ってる会社。
千葉か埼玉の温泉の岩盤浴にミラーボールあった笑
lo mejor que yo e visto en mi vida son uno maestro esto chino lo felicito es un bella de arte lo elicito son uno maestro los chino
SO labour intensive 😱
That muzak…
Very cool thanks for sharing.
Зеркальный шар - это очень красиво! Молодцы!
Saludos desde México excelente trabajo
La precisión y el trabajo que ponen en cada parte del proceso es increíble.
Estoy seguro que las primeras bolas de espejos que hicieron en esta fábrica siguen funcionando, la calidad y fortaleza de los materiales salta a la vista.
Saludos desde Argentina.
Шар моего детства.❤❤❤😊
I'm surprised that no protection glasses are used! An incredible process and great human technique.
interesting process. placing the mirror circles on the metal ball and then applying
the cement ,reminded me of doing a Mosaic art piece, with small ceramic tile squares.
did not realize that the Motor is inside of the ball. always thought it was up in an attic,
and the down-rod on the ball was attached to it, through a hole in the ceiling.
I have learned something here. thank you for an interesting video my friends in Japan 😀
Ya, I have a very cheap version, the globe is most likely just cardboard, and the mirrors are square and very crudely placed. The motors on mine are on the outside though, bilt into the hook mechanism. I actually had to replace one of the motors, thankfully its no big deal.
These mirror balls though are obviously top notch, and a work of art compared to mine. Although I've been using mine for over 30 years now, I didn't appreciate the labor involved in the cheap ones I owned, and how much more labor is involved in these works of art.
Wow...who knew?! So interesting to watch. I'll take one small mirror ball please!
Excellent.
Very nice ball. love the metal internals and circular mirror. Cheap balls use polystyrene and square mirror, the shape of the reflected light's just aren't the same. 👍👍
Cool ! I have a fever now. ..🕺
so beautiful
ほぼ手作りなんだ😮
鏡から丸鏡切り出すのが、ガラス扱ってるとは思えないほど凄い。
Such precision manufacturing and fit. Probably better engineered than Sputnik back in the day.
めちゃくちゃかわいい！
部屋に欲しい
とてもクールですね！
動画に音楽を入れないでいただくことは可能でしょうか。🙏🏼
ありがとうございます
I love mirror balls. I like the idea of a circular mirror. Perhaps a surface first mirror would look sharper?
Japanese workers be thinking: "These Americans will buy ANYTHING!"
欲しくなるね こんなにいい仕事してる製品は本当に欲しい
The music has got to go
Best disco ball I've ever seen.
Japan is always No 1 .
بيه جهد كثير
Today was how old I was when I learned the motor for spinning the balls is inside of it, and not exterior. Always thought it was something in the ceiling which spun the rope/pole as well as the ball
Сколько стоит такое произведение?
Дискотека💃👯🕺
ボールを絞りで作っていたとは😳
鏡のサイズが場所によって違うのですね。
Wow, they use metal spinning to make the two halves. I would have thought that using something like hydroforming was much more efficient both in terms of time and cost.
30 years too late . . .
A lathe is much cheaper than a high pressure setup. You'd need also a die for each diameter, parts like that are ridiculously expensive.
@@timtim8468 Makes sense, thanks.
Low volume production. Not worth the $100,000 plus for each die to be made for them to be pressed out. If you wanted cheap plastic vaccuum-formed bases then China or Thailand are where you'd be shopping.
It's the circles cutting that could be so much more cost effective if done by a CNC (or a similar process).
Using heat and water to heat shock the glass to get the circles easier vs after scribing the circles doing it by pliers
well done , thats a quality product ,,, when the mirrors started to fall off my last 1m mirror ball as the glue dried out , it revealed a polystyrene globe of the world ,,, I wasnt impressed at all.
Reminds me of the Disco days.
I need one for my room now. I must have one 💃
I am surprised that there are still companies that make these.
They should have disco playing all the time in that shop.
very cool!
笑福亭鶴光さんの
「うぐいすだにミュージックホール」
この曲がが思い浮かんだ人、挙手！
I wish I was a mirror ball, so when the world shines a light on me I shine in return