Perfect review mate, thanks! Saw the one on the G&G SMC 9 aswell and i am doubting between the two. Wich one would you pick, the SMC 9 or this VMP 1? Can you elaborate on differences in quality and gas effenciency? Cheers!
Hi there, to be honest, between the two, I'd go for the vmp1. The g&g uses a proprietary inner barrel hop unit that is very fragile and almost impossible to get a replacement for. The vmp1 is basically an mp9, and so there are a lot of parts available. In the end, it comes down to you and your preference. Hope that helps.
Iam still in doubt of buying one of these, or just save for a TM gbbr. I like the size of this and i cant seem to find a tm mp7 anymore around belgium so....decissions.
Hi there, I totally understand. It's hard to trust in a new product from a brand like vorsk with their track record in the pistol market. I can say if you're looking for a small pdw/smg, then check out next weeks unboxing. I think you'll like it.
Please , what about nozzle spring or nozzle return springs ?? Hope they avoided the same way of kwa/ksc was realized ! Such an unreliable way, super weak point
Hi there, it really is a heart transplant of the mp9 in a new shell situation. A basic copy of the kwa system inside. As for durability, I can confirm that no brakes or parts are replaced after 3k rounds so far. Any change I will post an update.
I'm sorry to hear that, I've not had that issue, I do know the older kwa mp9's suffered from nozzle issues, but through the 3k rnds +, I've put through mine I haven't had that issue.
I have 2 Vorsk pistols and to be honest they are all show and no go (shite). I do like this gun but will wait for the long term test reviews to come in before buying one
Hi there, I completely understand your reservation with the vorsk ump1, I was very much in that frame of mind as the vorsk pistols I see spend more time in the ready room being repaired than in the arena. Thankfully, as the vmp1 is not 100% vorsks own design as the internals are just kwa mp9/tmp etc.. I will say that after many rounds through, it hasn't lost zero and runs flawlessly. My only complaint is the trigger. Being a machine pistol, it's a long pull, but after a game or two, you get used to it. Hope that helps.
Your knowledge on guns and the history behind each and everyone is outstanding. I've learned so much about guns from you. Everything you tell us is actual fact!! Thank you for your channel. As for this gun, it seems so awesome. And the marksmanship is above the bar. I have actually placed an order for this as soon as I saw your video. Thank you once again. BTW, my name is, Jose 😁
Due to the size, design and type of flash hider, it is not a faithful replica of B&T's MP9 or TP9, but rather a free design. It looks cheaper than the KWA design.
Hi there, I don't have a hpa kit to test for you, but from friends, how have it performs just as well as the mp9 as its internals are the same. The only thing I was told was to keep the Psi low.
@@MiddleAgeGameruk ok, at winter temperatures here in finland easily drop under -20 °C so im gonna shoot indoors alot but im so excited to go shoot outdoors when spring comes.
Hi there, the Vorsk VMP-1x is a good starting point for a primary gbb smg/pdw, 2x mags and precision inner barrel in the box for £259.99 rrp is a good value, not forgetting a few spare bit for repares thrown in too.
I don't know why Vorsk have such a bad rep. Yes they are cheaper than TM, WE etc so can't expect perfect performance but I have a few of their pistols and they all perform about the same as the WE's I have. I think part of the problem is, because they are cheap, noobs buy them then break them doing something wrong and then go online to complain about how bad they are.
So I take it mp9 mag will fit vmp1?
Great informative video, could open top slide to save my life 👍🏾
Great review, thank you! Is it possible to swap out the stock for a different one?
I think you can ive seen it with a sling instead of a stock, so im assuming you can swap it with a different stock
You can get a m4 buffer tube for it to replace the stock with whatever you like
Perfect review mate, thanks! Saw the one on the G&G SMC 9 aswell and i am doubting between the two. Wich one would you pick, the SMC 9 or this VMP 1?
Can you elaborate on differences in quality and gas effenciency?
Cheers!
Hi there, to be honest, between the two, I'd go for the vmp1. The g&g uses a proprietary inner barrel hop unit that is very fragile and almost impossible to get a replacement for. The vmp1 is basically an mp9, and so there are a lot of parts available. In the end, it comes down to you and your preference. Hope that helps.
@@MiddleAgeGameruk Thank you, that helps alot!
i have both hpa and the vmp is better quality
Great review!
Have any parts broken since you have it or it's still going strong?
Hi there, it's still going strong. They do give you replacement nozzle and o-rings, but I've not needed them so far
Iam still in doubt of buying one of these, or just save for a TM gbbr. I like the size of this and i cant seem to find a tm mp7 anymore around belgium so....decissions.
Hi there, I totally understand. It's hard to trust in a new product from a brand like vorsk with their track record in the pistol market. I can say if you're looking for a small pdw/smg, then check out next weeks unboxing. I think you'll like it.
Wee thank you for this video.
it was actually a pleasant surprise. I guess copying KWA's homework has payed off
@@MiddleAgeGameruk hey when it works it works. Look at cyma and their new GBB line or Golden Eagle.
Please , what about nozzle spring or nozzle return springs ?? Hope they avoided the same way of kwa/ksc was realized ! Such an unreliable way, super weak point
Hi there, it really is a heart transplant of the mp9 in a new shell situation. A basic copy of the kwa system inside. As for durability, I can confirm that no brakes or parts are replaced after 3k rounds so far. Any change I will post an update.
Thanks for the reply !! I will follow up any update on your channel
Winner winner chicken dinner! Cant wait for a tracer swap in!
Nozzle broke on me in about 8 mags. Lovely.
I'm sorry to hear that, I've not had that issue, I do know the older kwa mp9's suffered from nozzle issues, but through the 3k rnds +, I've put through mine I haven't had that issue.
I suspect you loaded too many BBs in the mag and then shoved it in.
I have 2 Vorsk pistols and to be honest they are all show and no go (shite). I do like this gun but will wait for the long term test reviews to come in before buying one
Hi there, I completely understand your reservation with the vorsk ump1, I was very much in that frame of mind as the vorsk pistols I see spend more time in the ready room being repaired than in the arena. Thankfully, as the vmp1 is not 100% vorsks own design as the internals are just kwa mp9/tmp etc.. I will say that after many rounds through, it hasn't lost zero and runs flawlessly. My only complaint is the trigger. Being a machine pistol, it's a long pull, but after a game or two, you get used to it. Hope that helps.
Take a drink every time you hear 'how do you say' and beware of the effects
Your knowledge on guns and the history behind each and everyone is outstanding. I've learned so much about guns from you. Everything you tell us is actual fact!! Thank you for your channel. As for this gun, it seems so awesome. And the marksmanship is above the bar. I have actually placed an order for this as soon as I saw your video. Thank you once again. BTW, my name is, Jose 😁
Due to the size, design and type of flash hider, it is not a faithful replica of B&T's MP9 or TP9, but rather a free design. It looks cheaper than the KWA design.
Hi there, the flash hider is vorsks own design but is very easly removable to reveal a 14mm ccw thread so you can put what ever you want on there.
How would this perform with hpa mag adapter with a drum mag?
Hi there, I don't have a hpa kit to test for you, but from friends, how have it performs just as well as the mp9 as its internals are the same. The only thing I was told was to keep the Psi low.
Can't find it now. I saw a video where a guy tried to HPA it but said he had lots of problems so he went back to normal mags.
What model of foregrip do you have on yours? Thanks
Hi there, the forgrip is a simple Magpul moe clone for picatinny rails. Hope that helps.
Can i use red gas in it?
Hi there, you can use red gas or np3 in really cold weather. It Shotts awesome on green.
@@MiddleAgeGameruk ok, at winter temperatures here in finland easily drop under -20 °C so im gonna shoot indoors alot but im so excited to go shoot outdoors when spring comes.
Is everything still okay with the VMP-1? Or did she cause problems?
Hi there, I have not had any brakes or failures so far. The vmp1 has been a cheap surprise for sure.
I prefer my vfc mp7 navy tho i do like the look of this
loved my VFC MP7 right up until the bastard broke after only firing 2500 rounds or so... :(
Any idea if this can have a hpa tap at the bottom? (Not an adapter)
it cannot
Tempted as first dabble into gbb rifs (apart from gbb pistols)
Hi there, the Vorsk VMP-1x is a good starting point for a primary gbb smg/pdw, 2x mags and precision inner barrel in the box for £259.99 rrp is a good value, not forgetting a few spare bit for repares thrown in too.
I went for a TM mp7a1 and I absolutely love it
I don't know why Vorsk have such a bad rep. Yes they are cheaper than TM, WE etc so can't expect perfect performance but I have a few of their pistols and they all perform about the same as the WE's I have. I think part of the problem is, because they are cheap, noobs buy them then break them doing something wrong and then go online to complain about how bad they are.
👍️👍️👍️👍️👍️👍️👍️👍️👍️👍️👍️