First love the video! But caught something the might have been missed, the plastic isolator, between intake and carb, it started out with an o-ring, then the o-ring was missing resulting in it being placed in backwards. The o-ring on the carb should have been against the flat side of the plastic isolator, and then the "missing' o-ring on the isolator against the intake pipe. Am I missing something? BTW, do some speed runs with new nibbi, we'll love it!!!!
@@CageFreeTom yeah I thought the same thing too when I was putting it on, it didn’t sit flush with 2 o rings, is it supposed to be 2 o rings? Cuz it doesn’t leak air with just the 1 o ring in place
@@JamesOnWheels No air leak is good, first. But later in the video I see you flipping the black plastic piece with NO o-ring, unlike at start of video. If it's not broke, no need to fix. But if an airleak develops, first place I would look and just put in a new o-ring later. Love the vid!
@@yuilssavel380 I assume the fairings are the same for the original Grom model, it might not be the exact figment but marketplace also has parts if you get lucky or try eBay as well
@@charlesrupe3001 cosmetic wise I like this one, most of the other clones just have one solid color but mine came with gold forks and red stitching seats and a engine that doesn’t require you to plug emissions thing
@@SUBZX6R if your talking about the manifold, I had a 26mm manifold already on there from when I installed my mikuni clone carb, so I just used that, but you would need to get an adapter if you want to install a nibbi carb
U live in Washington? I just ordered mine u got help me tune my carb when i order it when my bike comes ! Where abouts n Washington u in?
First love the video! But caught something the might have been missed, the plastic isolator, between intake and carb, it started out with an o-ring, then the o-ring was missing resulting in it being placed in backwards. The o-ring on the carb should have been against the flat side of the plastic isolator, and then the "missing' o-ring on the isolator against the intake pipe. Am I missing something? BTW, do some speed runs with new nibbi, we'll love it!!!!
@@CageFreeTom yeah I thought the same thing too when I was putting it on, it didn’t sit flush with 2 o rings, is it supposed to be 2 o rings? Cuz it doesn’t leak air with just the 1 o ring in place
@@JamesOnWheels No air leak is good, first. But later in the video I see you flipping the black plastic piece with NO o-ring, unlike at start of video. If it's not broke, no need to fix. But if an airleak develops, first place I would look and just put in a new o-ring later. Love the vid!
@@CageFreeTom i ended up putting the o ring that goes on the intake side after you told me
FIRST BABY!!!!!! Hell yeah brother 🙌🏾🙏🏾💯
Good job
@@clonestarr3466 thank you
Hey does anyone have any idea how I can get fairings for this bike model?
@@yuilssavel380 I assume the fairings are the same for the original Grom model, it might not be the exact figment but marketplace also has parts if you get lucky or try eBay as well
Great video. Do you think this is the best grom clone or would you recommend another brand. Thank you
@@charlesrupe3001 cosmetic wise I like this one, most of the other clones just have one solid color but mine came with gold forks and red stitching seats and a engine that doesn’t require you to plug emissions thing
@@JamesOnWheels awesome
Did you buy an adapter or just flip the original one?
@@SUBZX6R if your talking about the manifold, I had a 26mm manifold already on there from when I installed my mikuni clone carb, so I just used that, but you would need to get an adapter if you want to install a nibbi carb