IMPORTANT 2:51 Not sure why I said the original price was $50. I think I just saw that price at some random retailer online. The original price was at $35. Also as informed by me in the comments. The little trailer hitch thing can pop off so a trailer WILL fit in there. I just tried it out with my Volvo Optimus trailer.
Request for next content: please also make a review to Baiwei TW1030 Optimus Prime too (which almost similar to each other) and try to upgrade him with both DK-44 shoulder and GX-60 truck/alt back and chimney
Awesome video but small correction on the trailer connector: it actually *can* connect a trailer if you take off that circular silver "lid". It connects the APC Toys trailer they made for their Optimus Prime (have it at home, works perfectly with both figures). Might work with Masterpiece sized trailers, haven't checked
Trick I picked up doing Gunpla Stickers: Sticker glue isn't water soluble so (as long as they're not paper) you can wet the stickers and surface you want to apply them to with a little water to prevent immediate adhesion. (bonus points if you add a drop of dish detergent to the mix. ) The water should give you enough time to nudge them where you want. (I recommend a toothpick or something similar for your placing tool) Just be sure to press them carefully and firmly to push out as much water as you can, and give it a couple minutes to dry before handling again. After that you should be able to give the stickers a final press to make sure they stay in place. I've done this with Toyhax stickers on several occasions and it works great.
I have tons of 3Ps and KOs...and I'm the same way...I won't apply any decals because I know I would mess up and they'd be just slightly off, and it would drive me nuts. So...I have a whole stack of stickers that keep coming with all the figures.
I've just ordered this figure I'm excited to have what I will consider my main optimus prime Currently my main is the smaller knock off of this version with custom autobot logos
I almost picked this up, but opted to wait for the Baiwei figure instead, which is a 1:1 KO with nicer swords and improved leg engineering. If anything I like the way Baiwei did it better, and on my copy at least, the build quality is very good.
And the good thing is the there will be a re release of the ss 102 optimus in the main line of studio series so it won’t be a buz worthy 102 any more it’s just a normal ss figure
My front grill panel tabs in as it should after I sanded down the round pegs in the arms that the panel tabs into. As they come, they're too fat, making the giant square panel not tab in properly.
I personally prefer OP towering over the others so I chose to get this one instead of the one by Baiwei. The included Noah Diaz on MHZ is just the right size too to ride core class Arcee :^)
2:51 That is actually false. SS102 as any other voyager was 35 buck in it's original price (scalpers and poor distribution made almost impossible to get i at that price, but that's besides the point)
I got this figure. The only stuff that I didn’t get was the key hologram and blaster effect parts. Aside from that it’s a great figure over all despite some minor joint issues.
Anyone know if the pipes come off? I was thinking of swapping the supreme commander’s smoke stacks for the black mamba ones, does anyone know if that works?
on mine the hands don't plug into the weapons and the front grill properly. Anybody knows how to fix it. I saw there's a new release, does that fix this issue? Please let me know
Honestly, I might just get this for the extra weapon accessories. I got the original for my birthday, and while I liked it overall, I don't like the small hand blaster and lack of an axe
I love SS ROTB Prime and adore him so much that no matter how flawed he is, I am sticking with that figure. But I'm glad these superior 3P alternatives exist for whoever didn't get a chance to pick up SS ROTB Prime.
Honestly i feel like the bed part could have been modified to be a backpack for all the weapons. Perhaps with some fold out panels with peg holes or little shelves to just have them hold on the back, note: the shelving is focussed on the collector in me so not really for play it something without Perhaps the use of magnets
I’m thinking about it. I don’t really feel like reviewing the same figure for a fourth time, even though there are some key differences but if enough people ask, I probably will do it.
Why my comment keeps getting delete ? I was just talking about how Vector Legacy is not that bad and that on Mark's post he's much better than on the Hasbro photo
CORRECTION ON THE FRONT GRILL OF THE FIGURE! He said about other copies it doesnt peg all the way, its actually false i watched every reviews i seen that it pegs securely and thats just his copy but the others copies is not loose
Bro, have you reviewed transformers one Optus prime power flip changer because if you do, I mean you love it it is better than all of your figures cause you have to try it OK
IMPORTANT
2:51 Not sure why I said the original price was $50. I think I just saw that price at some random retailer online. The original price was at $35.
Also as informed by me in the comments. The little trailer hitch thing can pop off so a trailer WILL fit in there. I just tried it out with my Volvo Optimus trailer.
Request for next content: please also make a review to Baiwei TW1030 Optimus Prime too (which almost similar to each other) and try to upgrade him with both DK-44 shoulder and GX-60 truck/alt back and chimney
Awesome video but small correction on the trailer connector: it actually *can* connect a trailer if you take off that circular silver "lid". It connects the APC Toys trailer they made for their Optimus Prime (have it at home, works perfectly with both figures). Might work with Masterpiece sized trailers, haven't checked
Thank you for the info. I just did that and found out it's 5mm compatible so any trailer will work. Wish I knew that before I finished the video lol
Trick I picked up doing Gunpla Stickers: Sticker glue isn't water soluble so (as long as they're not paper) you can wet the stickers and surface you want to apply them to with a little water to prevent immediate adhesion. (bonus points if you add a drop of dish detergent to the mix. )
The water should give you enough time to nudge them where you want. (I recommend a toothpick or something similar for your placing tool) Just be sure to press them carefully and firmly to push out as much water as you can, and give it a couple minutes to dry before handling again. After that you should be able to give the stickers a final press to make sure they stay in place.
I've done this with Toyhax stickers on several occasions and it works great.
The hand pegs can be fixed with a little sanding. That fixed the problem of the grill and arm cannon not plugging in properly on my copy
I was planning on doing this but mine just ended up fixing itself from repeated transformations and now it tabs in perfectly XD
The best 4th party Prime in ROTB looks amazing and better afford of price than Hasbro toys lately. Transformed into truck mode has folding its feet.
I have tons of 3Ps and KOs...and I'm the same way...I won't apply any decals because I know I would mess up and they'd be just slightly off, and it would drive me nuts. So...I have a whole stack of stickers that keep coming with all the figures.
I've just ordered this figure I'm excited to have what I will consider my main optimus prime Currently my main is the smaller knock off of this version with custom autobot logos
0:45 💀💀💀
Ayo
This figure begs for a slight black wash. The silver sections would sing if the panel liness were darkened with a little wash.
I almost picked this up, but opted to wait for the Baiwei figure instead, which is a 1:1 KO with nicer swords and improved leg engineering. If anything I like the way Baiwei did it better, and on my copy at least, the build quality is very good.
Are you dating the anime prime?
Ayo
I mean why is he gone for a long time
And the good thing is the there will be a re release of the ss 102 optimus in the main line of studio series so it won’t be a buz worthy 102 any more it’s just a normal ss figure
0:14 WAIT WHAT
6:00 the red in the chest is actually intentional for accuracy since the robot mode does have a patch of red in the middle.
Missed opportunity to say Optimommymus Prime instead of Optimus Mommy.
My front grill panel tabs in as it should after I sanded down the round pegs in the arms that the panel tabs into. As they come, they're too fat, making the giant square panel not tab in properly.
I personally prefer OP towering over the others so I chose to get this one instead of the one by Baiwei. The included Noah Diaz on MHZ is just the right size too to ride core class Arcee :^)
Same! Prime being tall af just gives him that presence that he needs
2:51 That is actually false. SS102 as any other voyager was 35 buck in it's original price (scalpers and poor distribution made almost impossible to get i at that price, but that's besides the point)
When scalping is so bad I can’t even remember the original price of a figure I bought 💀😭
I hope they make an oversize version of the Megatron concept from bumblebee next. Would love to see that big boy next to this beauty
I got this figure. The only stuff that I didn’t get was the key hologram and blaster effect parts. Aside from that it’s a great figure over all despite some minor joint issues.
HES BACK!!!
subscribed, most entertaining and indepth reviewer I have seen im already in love
The official Optimus Prime SS is retailed for 33$ not including taxes. I paid about 37 for mine from Target
Anyone know if the pipes come off? I was thinking of swapping the supreme commander’s smoke stacks for the black mamba ones, does anyone know if that works?
on mine the hands don't plug into the weapons and the front grill properly. Anybody knows how to fix it. I saw there's a new release, does that fix this issue? Please let me know
Honestly, I might just get this for the extra weapon accessories. I got the original for my birthday, and while I liked it overall, I don't like the small hand blaster and lack of an axe
You should review the Baiwey release of this figure. It looks very good and in terms of scale it's the same as the original ss102
Finally Leader Class
I love SS ROTB Prime and adore him so much that no matter how flawed he is, I am sticking with that figure. But I'm glad these superior 3P alternatives exist for whoever didn't get a chance to pick up SS ROTB Prime.
The Noah diaze don’t know if I spelt that right but he is actually bigger then he is supposed to be and also the bay verse prime is 10 meters tall
Good news, there was official confirmation that a re release of SS102 is definitely coming.
I honestly think this figure has pretty good heft and plastic quality, and I've had the original since release
I feel like he’s more in scale with the SS figs. It’s like the official Prime is too small in truck mode
SS102 Optimus is getting a re-release next year in January
I’ve seen a nemesis repaint of this guy online anyone know if it’s the same people or a ko of a ko
knockoff looking better than original is wild
i own this figure and i love it personally i only had one issue out of the box that i fixed
Can you do the baiwei rotb optimus prime
Very cool video mechazee reviews
You should get baiwei KO off ss102. It's the best so far. Fixed truck mode. Better smokestacks. Better weapons and items. Same size ss102
Tbf one can always grab a silver sharpy and reprolabels so it's an easy fix
Honestly i feel like the bed part could have been modified to be a backpack for all the weapons. Perhaps with some fold out panels with peg holes or little shelves to just have them hold on the back, note: the shelving is focussed on the collector in me so not really for play it something without Perhaps the use of magnets
I JAUT don’t know why it takes ko to fixe the figures and not the original or hasbro can’t do it
Budget,thats it
I hope somebody does tye entire ROTB characters
Can you review Baiwei TW1030?
How does it compare to Cute Toys CT01?
Will you be reviewing the Baiwei ko of ss102? I heard some great stuff about it and thinking of picking it up rather than the MHZ toys one
I’m thinking about it. I don’t really feel like reviewing the same figure for a fourth time, even though there are some key differences but if enough people ask, I probably will do it.
Bro, that thumbnail 💀
Can u please try to review the MX6601 megatron (SS109 KO)??
Bro really loves alien attack optional girl and Optimus prime
I feel like this knock off could modify a bit so it can look extra phenomenal just like the gundam community
Could you try do a review on the bawei version?
I have that one but it's all black, so it's Nemesis prime.
That's the thing I ordered today
Why my comment keeps getting delete ? I was just talking about how Vector Legacy is not that bad and that on Mark's post he's much better than on the Hasbro photo
CORRECTION ON THE FRONT GRILL OF THE FIGURE!
He said about other copies it doesnt peg all the way, its actually false i watched every reviews i seen that it pegs securely and thats just his copy but the others copies is not loose
I'd also recommend taking a look at BAIWEI TW-1030 SS102 KO
i would go also for baiwei.. with this supreme commander
please do a review of the baiwei one of this figure
Could you do a review on the just released robosen G1 megatron? If's fire🔥
If you think this is good, you should check out the new Baiwei ROTB Optimus
can the ko hold 5 mm?
Bro, have you reviewed transformers one Optus prime power flip changer because if you do, I mean you love it it is better than all of your figures cause you have to try it OK
I picked him up to scale better with megatron
For those who said it wouldn’t work, this proves you wrong.
I'm bought a mhm01 Optimus but it's coming in Sunday so I watched this video to learn how transform it hahahaah
Mechazee, do a robosen video about the new megatron 🤫🧏♂️
I prefer Baiwei KO of this. Almost perfect.
I just got him love him
Where has bro been
Freelance work and travel 😭
@@MechaZeeReviews DAMN
I want it but it's expensive in Malaysia.😢
Williamson Valley
Blanda Forks
Jacobi Stravenue
I don't like either truck mode :/
Anderson Rapid
i really confused. What's the difference of bmb op-01, tw1027, and mhm01? the figure looks the same
OMAIGAA
Optoms mommy is the best 😅
Nice.
Zora Village
Not 100% sadly. The shoulders are still pretty ass, but he does look good
Did anyone notice that almost naked woman
I got the studio series for 35 today bc it my b day
Pls review baiwei ko ss 102 prime :))
Gwen Light
Now if only he wasn't oversized...
Rohan Landing
baiwei tw 1030 please
i just wish it wasn't oversized
Tromp Trace
Kessler Drive
Quitzon Light
Turner Mill
Hassan Shores
again a Knock off better than the og
Thompson Square
Newton Fall
Review robosen megatron!
They sent me one. Hopefully I’ll be able to make the video soon. I’m kinda obligated to make it so it will happen.
Adolph Loop
0:02:
Why there girl optimus prime?
I wonder if you bet yourself how many times you can say the word "Figure" in one video lol