Big Thanks to E.R.T. for making things so simple for people who do not have the capabilities to make these electronic connections without the plug and play.
Literally I was thinking if there was an easy way to get a smoother ride for my bike and I stumbled on this. I'm not ready to jump to 72volts on the battery yet tho. If I understand correctly using this controller in place of the stock bafang one will allow me to have much smoother and easier throttle control. Will this controller enable me to push 50amps to the BBSHD. I have a quality battery that will take the draw. I like the look of the eggrider. Will this program the controller and allow for pas.. Sorry for so many questions! Cheers and thanks for the videos.
Electric Race Technologies Cool, I'll get it from you then. Presume that I just plug in the eggrider into the display part of the wiring harness and it's good to go.
Plug and play is great but please make a video about how to mount to the bicycle frame. There are only two tapped threads on the unit and not in a great location for mounting. I really don't want to strap it to the frame with zip ties. There should be a more professional looking way to mount it. Also could you cover water proofing and cable securing hiding? This is a great product but is lacking in design as far as installation goes. Even some 3D printed options for mounting brackets and cable management would be an excellent addition to your product line. Thanks Alan
Is there any way to add a torque sensor ? When I peddle no matter how fast i get full power on the assist level I’m in. Can i maybe reprogram to get a linear increase of power depending on how fast i peddle?
Hi sir, would you please like to share with us how you are programming the asi bac 800....to sense for throttle, PAC , brake cut off and gear change cut off. I'm having trouble with it.
If someone could answer this question that i have, that would be great. I was wondering what method or items you would use to make a connect between two other wires like in this video (for ex. like in this video he has parts of the wire covered with shrink tubes.)
Thanks for the demo. Up till now I never knew if the controller was internal or external. Haven't looked too hard! I would be connecting this to a egg rider display. That should not cause any issues?
@@wavebicycles alan . I speak with captain codswallop and he got his order an your in contact . I have seen your name come up mate a few times with not delivering . I want the plug an go bbshd ?
Hi Alan I'm sorry to address you publicly, but I can't get in touch with you through support. One week after came my order #410 . Where I order ASI BAC800 for bbshd, half twist throttle and Eggrider. But there is no eggrider and half twist throttle in the parcel. Since I know there are incompatibility issues with eggrider please send me the NXT color touch screen display also half twist throttle . I'm thinking you are okay.
Hi Alan. I'm having trouble getting a response from my emails, phone calls, and website requests for support. I have a defective ASI BAC800 that I purchased from you and would like to return. Sorry to post publicly but I have run out of other options. My order# is 279. Thanks.
this sounds about right. I placed an order April 2nd. web sight just says, "awaiting fulfillment". I have called. I have e-mailed. I have called again. No response to anything. I keep getting Alans voicemail. I paid extra for 3 day shipping. It's been 30 days and I got nothing. Be warned. He takes your money. He delivers nothing.
@@joblessalex I appreciate the feedback. People need to know what is up though. I placed my order April 2nd. On April 6th I got an e-mail that says: *** This is an automated message, please do not reply *** Electric Race Technologies has sent you a message about your order. Message: Hi *****, I dont have any throttles at the moment, can I send your kit now without throttle? I am expecting throttles to come in early next week. Thanks To reply click here. Electric Race Technologies electricrt.com/ I have replied via e-mail multiple times, the web site, telephone calls. Every way possible. From the looks of it, this guy just don't care. Or hes dead, or in intensive care.
@@joblessalex And he did charge me. PURCHASE AUTHORIZED ON 04/02 WPY*Electric Race 855-469-3729 CA S380093601016616 CARD 4364 $366.30 He takes peoples money. And delivers nothing. Then ignores all forms of communication. At the moment, this is theft. He takes the money. Then, makes out like there is a supply side problem, so I do not dispute the charges in the first 30 days. Then after 30 days, drops all pretense of working on the order and goes silent, and keeps the customers money in his pocket. Seems like premeditated theft. Or, am I wrong?
@@tkreddeath006 I'm not saying he's good lol. I have a controller that's busted from delivery that he still hasn't replaced or shown me what I've done wrong if it's on my end. I don't recommend buying.
I don't understand what he is doing except promoting the controller which is one customer commenting below that the controller is a deffective and no one answer the claim.
Glen Garden electricrt.freshdesk.com/support/solutions/articles/44001685069-known-and-supported-motors-with-plug-and-play-profiles Here is a list of supported motors with plug and play profiles
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Big Thanks to E.R.T. for making things so simple for people who do not have the capabilities to make these electronic connections without the plug and play.
Thanks. Was easy to install. Except I am not sure how to access the bacdoor app. Can you help?
Literally I was thinking if there was an easy way to get a smoother ride for my bike and I stumbled on this. I'm not ready to jump to 72volts on the battery yet tho.
If I understand correctly using this controller in place of the stock bafang one will allow me to have much smoother and easier throttle control.
Will this controller enable me to push 50amps to the BBSHD. I have a quality battery that will take the draw.
I like the look of the eggrider. Will this program the controller and allow for pas..
Sorry for so many questions! Cheers and thanks for the videos.
Yes to all your questions, and also you will gain higher RPM as well. About 2000 additional RPM even with a 52V battery
Electric Race Technologies That's incredible. If I am in Canada where is it best to buy? Do you supply direct?
Captain Codswallop yes I do
Electric Race Technologies Cool, I'll get it from you then. Presume that I just plug in the eggrider into the display part of the wiring harness and it's good to go.
Hi, asi arrived ok. Struggling to get into the asi bacdoor tho. Please help. Cheers.
Plug and play is great but please make a video about how to mount to the bicycle frame. There are only two tapped threads on the unit and not in a great location for mounting. I really don't want to strap it to the frame with zip ties. There should be a more professional looking way to mount it. Also could you cover water proofing and cable securing hiding? This is a great product but is lacking in design as far as installation goes. Even some 3D printed options for mounting brackets and cable management would be an excellent addition to your product line. Thanks Alan
will a 20 amp hr battery work?
Can i use the brake cut off connections on my existing bafang hardness instead of the connection you added on the ASI? Thx.
Is there any way to add a torque sensor ? When I peddle no matter how fast i get full power on the assist level I’m in. Can i maybe reprogram to get a linear increase of power depending on how fast i peddle?
Hi sir, would you please like to share with us how you are programming the asi bac 800....to sense for throttle, PAC , brake cut off and gear change cut off.
I'm having trouble with it.
Where can I get that red plug for the lights? Thanks
What kind of sorcery is this .. Are thee tools and the power adapter on the floor and the table with the motor perpendicular or what... 🤯
If someone could answer this question that i have, that would be great. I was wondering what method or items you would use to make a connect between two other wires like in this video (for ex. like in this video he has parts of the wire covered with shrink tubes.)
Technology, Gaming and Anime its bullet connectors, heatshrink is just to hold them together
Thanks for the demo. Up till now I never knew if the controller was internal or external. Haven't looked too hard!
I would be connecting this to a egg rider display. That should not cause any issues?
No issues Sparkie, the eggrider supports the ASI natively.
@@wavebicycles Thank you!
@@wavebicycles alan . I speak with captain codswallop and he got his order an your in contact .
I have seen your name come up mate a few times with not delivering .
I want the plug an go bbshd ?
Hi Alan
I'm sorry to address you publicly, but I can't get in touch with you through support.
One week after came my order #410 . Where I order ASI BAC800 for bbshd, half twist throttle and Eggrider.
But there is no eggrider and half twist throttle in the parcel. Since I know there are incompatibility issues with eggrider please send me the NXT color touch screen display also half twist throttle .
I'm thinking you are okay.
I need the harness from the asi bac 855 to the bbshd , anyone sell this separately?
Hi Alan. I'm having trouble getting a response from my emails, phone calls, and website requests for support. I have a defective ASI BAC800 that I purchased from you and would like to return. Sorry to post publicly but I have run out of other options. My order# is 279. Thanks.
this sounds about right. I placed an order April 2nd. web sight just says, "awaiting fulfillment". I have called. I have e-mailed. I have called again. No response to anything. I keep getting Alans voicemail. I paid extra for 3 day shipping. It's been 30 days and I got nothing.
Be warned. He takes your money. He delivers nothing.
I've always got my order, but yeah, slow af. Dont buy if you need it quick fs.
@@joblessalex I appreciate the feedback. People need to know what is up though.
I placed my order April 2nd. On April 6th I got an e-mail that says:
*** This is an automated message, please do not reply ***
Electric Race Technologies has sent you a message about your order.
Message:
Hi *****, I dont have any throttles at the moment, can I send your kit now without throttle? I am expecting throttles to come in early next week. Thanks
To reply click here.
Electric Race Technologies
electricrt.com/
I have replied via e-mail multiple times, the web site, telephone calls. Every way possible.
From the looks of it, this guy just don't care. Or hes dead, or in intensive care.
@@joblessalex And he did charge me.
PURCHASE AUTHORIZED ON 04/02 WPY*Electric Race 855-469-3729 CA S380093601016616 CARD 4364 $366.30
He takes peoples money. And delivers nothing. Then ignores all forms of communication.
At the moment, this is theft. He takes the money. Then, makes out like there is a supply side problem, so I do not dispute the charges in the first 30 days.
Then after 30 days, drops all pretense of working on the order and goes silent, and keeps the customers money in his pocket.
Seems like premeditated theft.
Or, am I wrong?
@@tkreddeath006 I'm not saying he's good lol. I have a controller that's busted from delivery that he still hasn't replaced or shown me what I've done wrong if it's on my end. I don't recommend buying.
I don't understand what he is doing except promoting the controller which is one customer commenting below that the controller is a deffective and no one answer the claim.
will this work with the 1000 w motor?
Glen Garden electricrt.freshdesk.com/support/solutions/articles/44001685069-known-and-supported-motors-with-plug-and-play-profiles
Here is a list of supported motors with plug and play profiles
Nice 💯👍👍
Did I read that Price Right??? about $400.00 just for controller !!
Dan Thiede cause high performance controllers are expensive? Shocking I know.
@@wavebicycles OK,, Have a good day..
Hello, I was wondering if I had no interest in PAS would I just leave it unplugged? Or some way to disable it with the software?
Eric De Angelis if you leave PAS unplugged then that will disable PAS
If only they could do the plug in 25amp bbso2b 750w 48v middrive, would be a dream
Can this be used in a dual controller setup?