Some great progress made on this old rusty crusty car.. I cannot wait to see you finish the welding and see what you choose to do regarding an engine .
HEY! BROTHER DOUG! THAT WOULD MAKE A GREAT SLOGAN STICKER ( WE DON'T PUSH CARS AROUND HERE ) OR ( NO PUSH-UPS. JUST SIT-UP ) AROUND THIS PART OF THE COUNTRY! BLESSINGS TO ALL THE FANS! ADIOS....
i always hate running outta gas! especially when you're on a roll. I found it pays to keep two bottles on hand. when one runs out and you start the new one, get the empty one filled/replaced asap.
Hey Doug this is Jose from New Hampshire those wells look like Frankenstein in a good way not in a bad way Frankenstein has so many stitches all over the place you can send you can say that Frankenstein stitches again I'm not criticizing love your work Buddy God bless
I think your welding job is great,you can grind them,make it look nice,putty insulation inside & underneath, awesome results. Keep going Doug, I know you will be happy when it's done.
Some advice. It is enough to dot-weld things in from one side with a few cm's apart depending on what it is. It saves you a lot of work, materials and pennies as well, then seam seal it to finish it of and close any gaps, it is accepted at MOT here in Denmark. For removing and cleaning rust you should try out phospheric acid, I wish I had used it earlier.
Awesome that ya are taking time so show a true car guy knows more than one aspect of a vehicle, using the flapper wheel really dressed that area up, and in real fashion, building a car includes making them run, left foot right foot, great vid sir..Little sound deander on that weleded area, it will dissapear.
Hello there Doug nicely done mate good on ya thanks for sharing enjoy watching your videos love it and the patch work is coming along well cheers buddy and all the best blessings to everyone from tropical far North Queensland the tablelands mungalli.
Get young blood on grinding too. Thats part of welding, tasks he can do. Speaking of which you can make that floor almost perfect and looking really good by grinding those welds down smooth with the metal. You won’t be able to tell where the edge begins and ends. You don’t have anything else to do right now out of gas. That’s something I don’t understand, if you bought the tank it’s yours, you should be able to exchange it wherever, not just NAPA. You may want to get two tanks of gas, when one goes out Tigga have a back up and that’s when you try to get another tank of new gas to replace the old one, but you still have one you’re using until then. I hope that makes sense, maybe get it somewhere else other than NAPA in case they can’t get any back in or something. Not putting all your eggs in one basket so to say. Good luck with all that.
Doug my man!! Some friendly advice!! When an area is that widespread rotted out in floor pan just cut the complete area out dude!! Weld in some square stock for support, then just weld in the new floor pan in sections!! Start with the bottom wide Section then cut your sides weld in!! It doesn’t have to be like the factory with an old car like that, you can change it up, make the floor fit with more or less depth!! Work smarter not harder. You will do less welding and cutting and it will have more metal clean cut wide span areas!!
Doug why don’t you switch to flux core wire. I had to buy the gas cylinder ,regulator and solenoid to upgrade my Lincoln welder years ago when I was patching my little British car. I always weld outdoors and I found in the wind the gas wasn’t effective. I switched back to flux core and I don’t see much of a difference..for under the car and carpet it will be ok to have some spatter.
I had gas all last week from all the turkey I ate lol not supposed to eat your own kind they say...lol anyways patches are good they are solid and strong it's not a Lamborghini lol as long as your happy with it well that's all that matters. I think it's good once ya seamseal it n paint it be awesome. Another awesome video keep up the good work. 😊rock on 🎸 🎸
Dirty Doug just smooth it out a little with the grinder after you are done welding and make it look good remember this car would have gone to the junk yard and it is solid now
Doug, After winter get a 55 gallon metal drum. Buy one gallon of diesl a week. By the time winter rolls back you will have a surplus for your heater. Easier to justify using it when you have a surplus..
Maybe Nate spotted a flaw in the suspension and geometry, and told him it would be undrivable at speeds faster than 50mph. So he ain't going there. First bugatti video was dated August 29, 2016. 🤣🤣
He knows it will never pass inspection, if you go back and look at the videos on the chassis and suspension components, the town idiot did not use a drill, rather he freehanded the plasma cutter to make all the holes, if the inspectors have watched these videos, he has Buckley's chances of ever getting that thing on the road,
Hi Doug,All that welding wire used on the floor wouldn't it be easier to put a full sized footwell on both sides. But at the end of the day it's upto you.
Dougy once u put the dom on it your not even not going to notice the welds bud the rusty red rooster still looks good to me and it's going to look good for him too once it's all black dougy keep it up bud I apologize for my gammer English in cool was not my strongest subject math and lunch and resuess was my cup of tea
Hey Doug I can't help but notice while watching the daily afternoon comedy hour program numb nuts has not been working on any projects that were dirty grubby vehicles he used you for doing the nasty grunt work on.
Thats what bums me put with mig. I bought a flux core from jegs for like a hundred buks.. works mint. Some wire brands work better than others.. uncle tonys garage and dexj's has vids on great units. But thats just me...
Doug take your time enjoy what your doing on the TR7. The audience can watch when you have videos ready. Your going to hate this project and any others you start, if you try to keep up this pace. There's more to life than the next video.
I don’t know how you do it Doug take care of your kid work a full-time job video by yourself every day. I know some people on RUclips that videos one hour a day and they’re exhausted.
HEY! BROTHER DOUG! YOUR NOT GONNA BELIEVE IT! THE VILLAGE ( IDIOT ) GOES TO ( SPEEDY'S GLASS SHOP ) WITH HIS GLASS, FOR A NEW PIECE! BECAUSE THE ( IDIOT ) CRACK THE ORIGINAL GLASS! NOW HE INSTALLING IT, POUNDING ON IT. WHILE IN THE FRAME! AND HE SAYS! IS THAT A CRACK! THE JACKASS CRACKS THE NEW PIECE OF GLASS, I BET THE FOLKS AT ( SPEEDY GLASS ) ARE WATCHING THIS EPISODE. THEY ARE LAUGHING THERE ( ASS ) OFF! ALSO MAKING BETS! I BET HE COMES IN SAYING THE ( GLASS IS BROKE ) YOU BURNED ME! HA! HA! HA! THAT'S WHY FOLKS LAUGH AT HIM ON HIS CHANNEL, HE'S TOTALLY CLUELESS! ALWAYS BLAMING FOLKS! HE HAS THE BEST CAR COMEDY CHANNEL, IT'S LIKE WATCHING A ( DRUNK ) DRIVE A TRAIN AT 3:00 PM EVERYDAY INTO A PARK TRAIN, AND THEN BLAME THE PARK TRAIN! YOU CAN'T MAKE THIS SHIT UP! YOUR SO LUCKY BROTHER DOUG, THAT YOU LEFT THAT LOSER SHOP! HE'S A FAKE! A JOKE! THAT'S THE VILLAGE ( IDIOT ) OH! YEAH!
Second day he's been cutting and sanding glass. I'm surprised his fans over there haven't ( yet) heralded him as the GOAT glazier, especially gay Brucie and the bald headed girl Aaron. 🤣🤣
@donaldhalls2189 IF YOU LISTEN! WHEN HE CAME BACK FROM ( FLORIDA ) WITH HIS TAIL BETWEEN HIS LEG! HE TALKING ( SHIT ) A MILLION DOLLAR BUILD! BUT THEN HE GET THE BACKLASH FROM VIEWERS THAT HE'S A FAKE, AND THE TROUBLE BETWEEN THE SKINNY ASS GIRL! THEN HE STARTS BASHING THE FOLKS COMMENTS, THEN YOU GET THE SKINNY GIRL DOING THE SAME! THE MORAL TO THE STORY IS THEY GOT COUGHT BY THEM SELFS RECORDING HIS IN-EXPERIENCE! HE HAS NO CLUE HOW TO BUILD A CAR CORRECTLY, HE MIGHT GRIND OFF A ROOF! BUT IT COMES OUT CROOKET ALWAYS, THE WINDOW NEVER ROLL UP! WHY! AGAIN HE HAS NO CLUE WHAT HE'S DOING! FOR EXAMPLE! THIS CARSON TOP FOR THE 1934 CABRILET, HE HAD TO CALL THAT ELDER MAN! ALWAYS BANGING SHIT AROUND GRINDING OFF THE STUDS FOR THE ROOF! WHY HE CAN'T TAKE MEASUREMENTS, HE CAN'T READ A TAPE MEASURE! SAD! ASK YOUR SELF! WHY HE HAS NO PAYING CUSTOMERS WITH BEUTIFUL CARS, NO ONE IN THERE RIGHT MIND WOULD EVER! EVER LET HIM PUT HIS HANDS ON THERE CARS! NOW! ANOTHER CAR! THAT SO-CALLED FAKE-ASS BUGATTI, WHY ISN'T THAT CAR AT ANY OF THE SHOW HE VISITS! BECAUSE THERE A CONTENT CHANNEL OF ( HALF BUILDS ) THOSE WORDS CAME STRAIGHT OUT OF ( JOLEENE ) MOUTH! SHE TOLD OLD ( ERNEST T. BASS ) WE DON'T HAVE TO FINISH ANYTHING! PERIOD! THERE CHANNEL IS A SCAM! FOR RUclips MONEY & THERE SUBCRIBERS PAY THEM! THAT'S WHY PEOPLE ARE NOW DOGGING HIM! HE'S BEEN EXPOSED! HE JUST MAKE LAWNART OR CARS HE PUSHES AROUND! OH! YEAH! DON'T FORGET THE PUSH-UPS! WHAT A IDIOT!
Wasn't it his bad attitude that got him the 'bad' name in the first place?. Pretty sure he's mellowed since his more youthful days. Doubt if anyone referred to him as a nice polite person back then. 🤣🤣
Great video and attitude. You don't push vehicles out of the garage, you DRIVE them out! Perfectly stated.👏
yes sir
A major challenge welding up the wholes. Great progress Doug. You will have a sporty car when you are finished. Power on man. Peace and God bless you.
Some great progress made on this old rusty crusty car.. I cannot wait to see you finish the welding and see what you choose to do regarding an engine .
The grinding noises are more appealing in there than some of those shops we know about..
HEY! BROTHER DOUG! THAT WOULD MAKE A GREAT SLOGAN STICKER ( WE DON'T PUSH CARS AROUND HERE ) OR ( NO PUSH-UPS. JUST SIT-UP ) AROUND THIS PART OF THE COUNTRY! BLESSINGS TO ALL THE FANS! ADIOS....
i always hate running outta gas! especially when you're on a roll. I found it pays to keep two bottles on hand. when one runs out and you start the new one, get the empty one filled/replaced asap.
Great video 👍🏼👍🏼👍🏼
Keep flux wire on hand for when you run out of argon
Hey Doug this is Jose from New Hampshire those wells look like Frankenstein in a good way not in a bad way Frankenstein has so many stitches all over the place you can send you can say that Frankenstein stitches again I'm not criticizing love your work Buddy God bless
Doug you are doing a great job for this car mutch more than that last owner be relentless for your son cheers
When Doug is here have no fear 😂!!
haha
I think your welding job is great,you can grind them,make it look nice,putty insulation inside & underneath, awesome results. Keep going Doug, I know you will be happy when it's done.
Some advice. It is enough to dot-weld things in from one side with a few cm's apart depending on what it is. It saves you a lot of work, materials and pennies as well, then seam seal it to finish it of and close any gaps, it is accepted at MOT here in Denmark. For removing and cleaning rust you should try out phospheric acid, I wish I had used it earlier.
I like watching you video watch ever day keep up the good work and keep teaching your son that someone he will remember
Awesome that ya are taking time so show a true car guy knows more than one aspect of a vehicle, using the flapper wheel really dressed that area up, and in real fashion, building a car includes making them run, left foot right foot, great vid sir..Little sound deander on that weleded area, it will dissapear.
It’s strong it doesn’t have to be pretty, coat of paint, carpets and no one will ever know. Don’t beat yourself up about it 👍
Hello there Doug nicely done mate good on ya thanks for sharing enjoy watching your videos love it and the patch work is coming along well cheers buddy and all the best blessings to everyone from tropical far North Queensland the tablelands mungalli.
Get young blood on grinding too. Thats part of welding, tasks he can do. Speaking of which you can make that floor almost perfect and looking really good by grinding those welds down smooth with the metal. You won’t be able to tell where the edge begins and ends. You don’t have anything else to do right now out of gas. That’s something I don’t understand, if you bought the tank it’s yours, you should be able to exchange it wherever, not just NAPA. You may want to get two tanks of gas, when one goes out Tigga have a back up and that’s when you try to get another tank of new gas to replace the old one, but you still have one you’re using until then. I hope that makes sense, maybe get it somewhere else other than NAPA in case they can’t get any back in or something. Not putting all your eggs in one basket so to say. Good luck with all that.
Doug my man!! Some friendly advice!! When an area is that widespread rotted out in floor pan just cut the complete area out dude!! Weld in some square stock for support, then just weld in the new floor pan in sections!! Start with the bottom wide Section then cut your sides weld in!! It doesn’t have to be like the factory with an old car like that, you can change it up, make the floor fit with more or less depth!! Work smarter not harder. You will do less welding and cutting and it will have more metal clean cut wide span areas!!
I know I even said that in the video. Why I didn't I do not know...
with all of the welding you are doing on this car I have named it Frank short for Frankenstein, keep up the good work Doug and little Doug.
TR7'S coming on strong 💪 shame you ran out of Mig Gas hope you manage too get some soon 🤞 keep on keeping on Dirty Doug Dude your the Man 👍 😎
Doug why don’t you switch to flux core wire. I had to buy the gas cylinder ,regulator and solenoid to upgrade my Lincoln welder years ago when I was patching my little British car. I always weld outdoors and I found in the wind the gas wasn’t effective. I switched back to flux core and I don’t see much of a difference..for under the car and carpet it will be ok to have some spatter.
However you tackle the problem at least it’s moving forward,👍🏻👍🏻👍🏻👍🏻👍🏻👏👏👏❄️❄️❄️🤠🇬🇧🇬🇧
Keep up the good work
I had gas all last week from all the turkey I ate lol not supposed to eat your own kind they say...lol anyways patches are good they are solid and strong it's not a Lamborghini lol as long as your happy with it well that's all that matters. I think it's good once ya seamseal it n paint it be awesome. Another awesome video keep up the good work. 😊rock on 🎸 🎸
Doug you could change to tig welding but the argon cost 5times as much. It is faster though. Anyway Nice Video
Enjoy watching your life adventure! Working on the Rusty crusty car! 👍😉
Looks like your getting it done, thanks for sharing, all the best to you all Over and Out
NOOOOOO dont redo. its rock solid and looks done well. no need to pretty up a rock solid floor..5 star its kewl sir
Dirty Doug dunnit dirt cheap ! Remember guys, like and share
Dirty Doug just smooth it out a little with the grinder after you are done welding and make it look good remember this car would have gone to the junk yard and it is solid now
Keep it coming doug 😀
Doug,
After winter get a 55 gallon metal drum. Buy one gallon of diesl a week. By the time winter rolls back you will have a surplus for your heater. Easier to justify using it when you have a surplus..
Great work again and great your always available for Jax
Does anyone know how long Chad has been working on the Bughatti. Is he just putting it off because he don'T KNOW HOW TO FINNISH IT?
At least six years I believe.
Maybe Nate spotted a flaw in the suspension and geometry, and told him it would be undrivable at speeds faster than 50mph. So he ain't going there. First bugatti video was dated August 29, 2016. 🤣🤣
He won’t finish it because it’s a piece of junk and he don’t want people knowing it
He knows it will never pass inspection, if you go back and look at the videos on the chassis and suspension components, the town idiot did not use a drill, rather he freehanded the plasma cutter to make all the holes, if the inspectors have watched these videos, he has Buckley's chances of ever getting that thing on the road,
Doug u can get the stuff that u can put on the floor it sticks and an insulation u won't see any of the patches
Keep on ram jamming Doug 👍🏻
Hi Doug,All that welding wire used on the floor wouldn't it be easier to put a full sized footwell on both sides. But at the end of the day it's upto you.
He is a great son.
Looks great man.
Enjoying your son’s new helmet 😀
need to insulate that shop Dougie
Doing great Doug keep going
What microphone are you using/
take us for a ride too weve never seen snow
Dougy once u put the dom on it your not even not going to notice the welds bud the rusty red rooster still looks good to me and it's going to look good for him too once it's all black dougy keep it up bud I apologize for my gammer English in cool was not my strongest subject math and lunch and resuess was my cup of tea
Good stuff Doug, one day atta time.
🐓in the 🏠
Great video Doug it’s coming together and nice to see Jax get into it with you cheers for now The Fiero Kid
Its turning out good,
Hey Doug I can't help but notice while watching the daily afternoon comedy hour program numb nuts has not been working on any projects that were dirty grubby vehicles he used you for doing the nasty grunt work on.
Well done dirty Doug getting shit done
Look good Doug
a go pro camera or phone body cam setup help with the videos🙂👍
Don't matter what it looks like it does the job. I got a lot of gas it's the wrong kind. Lol
Thats what bums me put with mig. I bought a flux core from jegs for like a hundred buks.. works mint. Some wire brands work better than others.. uncle tonys garage and dexj's has vids on great units. But thats just me...
I did the same thing and bought a flux core for the convenience and price factor. It's a little messier but it's worth the trade off for me.
Doug take your time enjoy what your doing on the TR7. The audience can watch when you have videos ready. Your going to hate this project and any others you start, if you try to keep up this pace. There's more to life than the next video.
💥💥🍔🍻🐿️
Just keep moving forward
If ya squint it’s mint
Hello from fredericton NB
It’s looking good bud keep at it
😊Happy Days Doug n Son 😊COMMENT etc.etc 😊
Can't get gas? WTF😢
Your welds looks better than chads lol🤣
Keep at it Doug
Eat beans you will have GAS
Good evening everyone
Remember in the comments someone saying cut a old roof skin off a parts car do the floor in one piece
I don’t know how you do it Doug take care of your kid work a full-time job video by yourself every day. I know some people on RUclips that videos one hour a day and they’re exhausted.
They so exhausted doing the one hour a day, they now going to take the weekends off. 🤣🤣
They’ve got people thinking they work 10 to 12 hours a day making one hour video. I don’t understand it.
Gorilla welds. Ugly but strong
HEY! BROTHER DOUG! YOUR NOT GONNA BELIEVE IT! THE VILLAGE ( IDIOT ) GOES TO ( SPEEDY'S GLASS SHOP ) WITH HIS GLASS, FOR A NEW PIECE! BECAUSE THE ( IDIOT ) CRACK THE ORIGINAL GLASS! NOW HE INSTALLING IT, POUNDING ON IT. WHILE IN THE FRAME! AND HE SAYS! IS THAT A CRACK! THE JACKASS CRACKS THE NEW PIECE OF GLASS, I BET THE FOLKS AT ( SPEEDY GLASS ) ARE WATCHING THIS EPISODE. THEY ARE LAUGHING THERE ( ASS ) OFF! ALSO MAKING BETS! I BET HE COMES IN SAYING THE ( GLASS IS BROKE ) YOU BURNED ME! HA! HA! HA! THAT'S WHY FOLKS LAUGH AT HIM ON HIS CHANNEL, HE'S TOTALLY CLUELESS! ALWAYS BLAMING FOLKS! HE HAS THE BEST CAR COMEDY CHANNEL, IT'S LIKE WATCHING A ( DRUNK ) DRIVE A TRAIN AT 3:00 PM EVERYDAY INTO A PARK TRAIN, AND THEN BLAME THE PARK TRAIN! YOU CAN'T MAKE THIS SHIT UP! YOUR SO LUCKY BROTHER DOUG, THAT YOU LEFT THAT LOSER SHOP! HE'S A FAKE! A JOKE! THAT'S THE VILLAGE ( IDIOT ) OH! YEAH!
Second day he's been cutting and sanding glass. I'm surprised his fans over there haven't ( yet) heralded him as the GOAT glazier, especially gay Brucie and the bald headed girl Aaron. 🤣🤣
Considering he was going to replace the glass before he Cracked it if you actually listen 😂😅, all the best
@donaldhalls2189 IF YOU LISTEN! WHEN HE CAME BACK FROM ( FLORIDA ) WITH HIS TAIL BETWEEN HIS LEG! HE TALKING ( SHIT ) A MILLION DOLLAR BUILD! BUT THEN HE GET THE BACKLASH FROM VIEWERS THAT HE'S A FAKE, AND THE TROUBLE BETWEEN THE SKINNY ASS GIRL! THEN HE STARTS BASHING THE FOLKS COMMENTS, THEN YOU GET THE SKINNY GIRL DOING THE SAME! THE MORAL TO THE STORY IS THEY GOT COUGHT BY THEM SELFS RECORDING HIS IN-EXPERIENCE! HE HAS NO CLUE HOW TO BUILD A CAR CORRECTLY, HE MIGHT GRIND OFF A ROOF! BUT IT COMES OUT CROOKET ALWAYS, THE WINDOW NEVER ROLL UP! WHY! AGAIN HE HAS NO CLUE WHAT HE'S DOING! FOR EXAMPLE! THIS CARSON TOP FOR THE 1934 CABRILET, HE HAD TO CALL THAT ELDER MAN! ALWAYS BANGING SHIT AROUND GRINDING OFF THE STUDS FOR THE ROOF! WHY HE CAN'T TAKE MEASUREMENTS, HE CAN'T READ A TAPE MEASURE! SAD! ASK YOUR SELF! WHY HE HAS NO PAYING CUSTOMERS WITH BEUTIFUL CARS, NO ONE IN THERE RIGHT MIND WOULD EVER! EVER LET HIM PUT HIS HANDS ON THERE CARS! NOW! ANOTHER CAR! THAT SO-CALLED FAKE-ASS BUGATTI, WHY ISN'T THAT CAR AT ANY OF THE SHOW HE VISITS! BECAUSE THERE A CONTENT CHANNEL OF ( HALF BUILDS ) THOSE WORDS CAME STRAIGHT OUT OF ( JOLEENE ) MOUTH! SHE TOLD OLD ( ERNEST T. BASS ) WE DON'T HAVE TO FINISH ANYTHING! PERIOD! THERE CHANNEL IS A SCAM! FOR RUclips MONEY & THERE SUBCRIBERS PAY THEM! THAT'S WHY PEOPLE ARE NOW DOGGING HIM! HE'S BEEN EXPOSED! HE JUST MAKE LAWNART OR CARS HE PUSHES AROUND! OH! YEAH! DON'T FORGET THE PUSH-UPS! WHAT A IDIOT!
To much talk and no content. Time to stop watching this channel
Did you see the BAD Chad has CHANGED his name to " BAD ATTITUDE " while working on that beautiful car that he's Totally Destroyed
Wasn't it his bad attitude that got him the 'bad' name in the first place?. Pretty sure he's mellowed since his more youthful days. Doubt if anyone referred to him as a nice polite person back then. 🤣🤣
He's A STROKE. @haynesdavis-m3p
Hey Douglas have you got Facebook