I have a 5 stage bean sorter I got from Amazon a few years ago, same concept. However you have to take it a step further, start with your bulk lego (small, big, and technic) and use the largest sorter and scoop bulk into it while it's sitting in a bin it's size. Shake and mix until the smaller parts are in the clear bin and dump the large parts (you can fish out technic CCBS and partial builds out) then repeat until third box is full and bin of small/medium is full. Take layers 1-4 and use those to sort by size. It helps to get the sorting by size done first then take a paper plate and sort the sizes by type.
This is how you know someone is Neurodivergent (myself included, I'm guilty too) "This will take too much time...I KNOW! I'll spend even more time making an overcomplicated solution!"
Could be! But as @thecringebeginschannel868 said, you probably can't buy it. I do know there are others that actually have this idea available for purchase, but I just wanted to build my own 😄
How about: There's a box. Inside the box, there is one, say, half the size. This second box is composed purely of holes. This second sif box is supported by a lever, which you can rotate. This way you'll have 2 layers which are well sorted, better than shaking. Repeat the idea for how many layers you want. Many concentric boxes.
2:09 no I mean yes it sounds easy but them large plates are going to be REALLY good at blocking the holes stopping the smaller bits from falling though, once your past the plates part it will get slightly easier but the whole reason a coin sorter works is it has a way to get rid of everything it it’s sorting try while what you suggested is both the sort tray and the final destination which is going to be a pain in your ass.
@@SunshineCo225at that point you're sorting the Legos yourself lmao. You missed the point, at every level the Legos will clog the holes of the smaller holed tray that they sit on, meaning you'd have to pull Legos out on every size
It's honestly really cool! I thought about getting one for so long before xTool reached out. You could even start an actual business with something like this, it's not just a hobby machine
Yea that's gonna be tough. You could always write a business plan, get the funding from the bank and start a lasercutting business. There's great money in that actually hahah
It's a clone of my own voice. I run the channel with my friend who does most of the editing and with our busy schedules doing a speech to speech AI voice over, it's a lot easier to manage. We do plan on transitioning to a "real" one at some point though
after wasting all that time, you still have to sort the bricks by color and type, which is MOST of sorting. separating elements by size take a few minutes even in a large pile like that!
I know, it's an investment but look at it this way. These machines can actually be used to start a business as well. You can easily make your money back in no time
Maybe I should actually only use red parts from now on. For literally everything. I could redo my city and make a video "I made a lego city and everything is red" 😂
Using laser cutter to build a large over engineered lego sorter is like killing chicken with a maximum enchanted diamond sword for the heck of it... This is why youtube was invented
Ah yes, I see we have a fellow autistic. Well, I have ASD, but that’s close enough! XD I see you didn’t want to spend time sorting the lego so you spent WAY more time building a contraption just to sort the lego. Don’t worry I made the same mistake. I simply sort my lego in my spare shelves, yet I never use it as much, aka *SCREW SORTING!!! JUST DUMP THE LEGO IN THE BIN!!! IT BOOSTS THE CREATIVITY OF YOU USING THE FEW PEICES YOU KIND FIND IN THAT HUGE PILE!!!* XD
Bro wasted days of his life to save some hours of sorting... then again if you have more Legos you can save time with the machine that you already build but sill isn't that a bit to much money And are you making a company because I have a big ass box full of random Legos 😫
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
DISCOUNT CODES
xToolEUYT80 for €80 OFF on Orders over 999€
xToolEUYT100 for €100 OFF on Orders over 2299€
Cool
In the red brick in the fitht u could do an hole for the bricks
noone gonna buy this
My brain overcomplicating the most menial and simple tasks:
Why do something the sensible way when you can spend hours or even days coming up with a way to make it easier? 😂
@@renzo260 So true!
Exactly @@renzo260
simple is not mutually exclusive with tedious
True
I have a 5 stage bean sorter I got from Amazon a few years ago, same concept. However you have to take it a step further, start with your bulk lego (small, big, and technic) and use the largest sorter and scoop bulk into it while it's sitting in a bin it's size. Shake and mix until the smaller parts are in the clear bin and dump the large parts (you can fish out technic CCBS and partial builds out) then repeat until third box is full and bin of small/medium is full. Take layers 1-4 and use those to sort by size. It helps to get the sorting by size done first then take a paper plate and sort the sizes by type.
That sounds like it works well too!
this exact thing was a lego product years ago, it was in the shape of a lego head
I actually wonder why they discontinued it
i actually have this lego sorter
It’s really bad at sorting Lego though. The holes are all way too big. The hardest pieces to sort are the
@@dunnimation I guarantee this has the same problems
1:37 little do you know that’s the exact same thing :)
😂
This is how you know someone is Neurodivergent (myself included, I'm guilty too)
"This will take too much time...I KNOW! I'll spend even more time making an overcomplicated solution!"
Hahahah I feel this. I could probably run for president of the ADHD club with how bad it is 😂
Hey, at least now he has a way to speed up any sorting he needs to do in the future, so it'll save time in the long run.
How dare you be _absolutely right_
2:16 You censored it despite already showing it, lol
Hahahah damn, you're right! Small editing mistake, I hope you can forgive me 😂
Didn’t unnecessary inventions do this?
Yeah but u can’t buy it
Could be! But as @thecringebeginschannel868 said, you probably can't buy it. I do know there are others that actually have this idea available for purchase, but I just wanted to build my own 😄
Awesome! I need this for my son
interesting idea, i'll make one to sort my bricks 😆
Spending time sorting lego : NO
Spending triple the time filming and editing a video about making a tool that do it faster : YES
Accurate
The way I would make the holes is based on a lego brick size
take a 2x2 brick, then you make the holes big enough for a 3x3 stud one
That's basically what I did yes. Measure the part and add a little extra space
How about:
There's a box. Inside the box, there is one, say, half the size. This second box is composed purely of holes. This second sif box is supported by a lever, which you can rotate. This way you'll have 2 layers which are well sorted, better than shaking.
Repeat the idea for how many layers you want. Many concentric boxes.
That might work too! Probably does take up a bigger footprint right?
Didn’t even realize this was renzo, watched your old glock lego tutorial years ago
It sure is! Welcome back!
My dad had the same problem sometime in the 80s and made a similar contraption minus the vibration
Cool!
2:09 no I mean yes it sounds easy but them large plates are going to be REALLY good at blocking the holes stopping the smaller bits from falling though, once your past the plates part it will get slightly easier but the whole reason a coin sorter works is it has a way to get rid of everything it it’s sorting try while what you suggested is both the sort tray and the final destination which is going to be a pain in your ass.
To be fair it wouldn't be that hard to just... Pick out the large plates. They're kinda already large and obvious.
@@SunshineCo225at that point you're sorting the Legos yourself lmao. You missed the point, at every level the Legos will clog the holes of the smaller holed tray that they sit on, meaning you'd have to pull Legos out on every size
I haven't really had that problem yet to be honest but I get where you're coming from
Make it modular so that another LEGO block can be added underneath, and the filtering will continue
It actually is already! I can easily add more layers if I wanted to
Wow that laser printer is insane and insanely expensive
It's honestly really cool! I thought about getting one for so long before xTool reached out. You could even start an actual business with something like this, it's not just a hobby machine
I need this
I’ll auction it for 200$
❤Cool!
Yes
Post more I love the content
I'm trying, but it's a lot of work. What kind of videos would you like to see?
Where can I get the project to cut one for myself?
I can upload it to the Discord server one of these days. Just keep an eye out for that!
I'm gonna call you red guy
😂
@@renzo260ima call you redzo 260
@@renzo260 RedPar260
I am the real red guy
Nice video!!
Thanks! 😄
hello what the size of holes you used ?
Not sure on the exact sizes but they're based on the sizes of the bricks I need filtered
lego already made a head ver of this
I like making crafts like this but they take more time then actually doing it lol
Usually yes hahaha! It'll save some time in the long run though
I need this too!🤣
Hahahah! I wish it would actually sort everything by color and part type though, that would be the best 😂
next sorter: colours
4:05 what if my budget is 0?
Yea that's gonna be tough. You could always write a business plan, get the funding from the bank and start a lasercutting business. There's great money in that actually hahah
You should take a look at Modulex bricks
Will do!
is the voice over ai?
It's a clone of my own voice. I run the channel with my friend who does most of the editing and with our busy schedules doing a speech to speech AI voice over, it's a lot easier to manage. We do plan on transitioning to a "real" one at some point though
@@renzo260 thats actually clever!
Couldn't you just 3d print it buying one if you dont have?
Yea but I like to make things complicated for myself 😂
We use something like that to sort out different sediments in geology!
Oh yea, that makes sense!
Leuke video
I definitely thought it was gonna be made out of lego…
Then what am I gonna sort if I use all of my Lego to make the sorter? Hahaha
Renzo more like red-zo
TAKE MY MONEY
😂
I am the 1k like
Instead of purple guy, he’s red man
Awesome! There's a lot of great building inspiration in Italy
What?
Oh what the hell, I responded that to someone else. I think RUclips messed something up 😂
after wasting all that time, you still have to sort the bricks by color and type, which is MOST of sorting. separating elements by size take a few minutes even in a large pile like that!
True, although a lot of people don't actually separate much further. It's a decent starting point I would say
Er zijn tekeningen voor zoiets een american heeft die al gemaakt 7 lagen
Did i for real see me as lego?
Yes, yes you did
this was already a lego product
Yea but they discontinued it a while ago I think
Hi
bro it whould havebeen easyer just to sort
Probably 😂
Yea, then you have three piles of Lego instead of one to sort, really not much of a difference.
At least I don't have to make those initial 3 piles, saves a bit of time probably 😂
cheapst one is 990€ 💀
I know, it's an investment but look at it this way. These machines can actually be used to start a business as well. You can easily make your money back in no time
U=RED
Maybe I should actually only use red parts from now on. For literally everything. I could redo my city and make a video "I made a lego city and everything is red" 😂
Cool@@renzo260
All those scratches 😬
Good for children but not for parts used in exhibitions 😬
Luckily it was a box of Lego from a loooong time ago, they were already pretty scratched up haha
Twenty-third
First
Using laser cutter to build a large over engineered lego sorter is like killing chicken with a maximum enchanted diamond sword for the heck of it...
This is why youtube was invented
Exactly! 😂
Ah yes, I see we have a fellow autistic. Well, I have ASD, but that’s close enough! XD
I see you didn’t want to spend time sorting the lego so you spent WAY more time building a contraption just to sort the lego. Don’t worry I made the same mistake. I simply sort my lego in my spare shelves, yet I never use it as much, aka *SCREW SORTING!!! JUST DUMP THE LEGO IN THE BIN!!! IT BOOSTS THE CREATIVITY OF YOU USING THE FEW PEICES YOU KIND FIND IN THAT HUGE PILE!!!* XD
ADHD, but yes hahaha
My brain just works so much better if everything is organised to perfection 😂
Bro wasted days of his life to save some hours of sorting... then again if you have more Legos you can save time with the machine that you already build but sill isn't that a bit to much money
And are you making a company because I have a big ass box full of random Legos 😫
It'll definitely save me a lot of time in the future with all of the Lego I have! And no, I'm afraid you're going to have to sort yourself 😂
@@renzo260 o gess I will 😫
nice commercial
Dude i also love stranger things