Yea, War (the person in the video) had also basically no issues, except for the trigger unit misfiring. We are working on making the last part in the build series. We just need to find the remaining parts.
Hi, i have a MB03 as well. I was thinking about uprading the inner and the outher barrel, i don't know yet what to get, you have some suggestionor what can i search to be sure if it compatibile?
If you're looking for inner barrels, look up vsr-10 inner barrels and find what length you're going for. And for the outer barrels, the only ones that I know of are by maple leaf and Action Army.
Thanks for making this video. I'm considering VSR platform and trying to decide between inexpensive clone (WELL, CYMA, JG, HFC) vs more expensive TM or Action Army T11. Regarding the WELL MB02 (300mm barrel) or MB03 (430mm barrel), why did you decide to reduce your barrel length? I'm trying to decide which length to get.
I reduced my barrel length because I'm using a suppressor. If I were to use the normal length the whole rifle would be too long for me, I would be hitting and striking the barrel against everything. Based on past experiences with the Ares Stricker having both a long and short barrel I enjoyed more the short barrel because of maneuverability. But what you could do if you get the same rifle I did you can change the inner and outer barrel to a shorter length or possibly longer if there is one, but that's entirely up to you.
6:14 The lower the degree the better it hops every bb. But, you need a stronger degree for higher fps. The lower the degree the softer the material the higher the degree the stronger and stiffer the material Sorry for the mix up.
Now I've been reading the Well MB03 actually uses a 500mm inner barrel instead of the normal 430mm used by other VSR clones. Any idea of the inner barrel lengths of the MB03 and MB02?
@@thefourhorsemen04 thanks for the info. Those are the same dimensions I've found. The MB03 is about 3 inches longer than a normal VSR10 but the MB02 is similar to the G-spec. Not sure why Well went with a 510mm barrel. I have a new AA 6.01 430mm VSR barrel I can install but the outer barrel will be too long. Oh well, MB02 is a great price! Thanks again.
andysairsoft.ca/index.php?route=product/produc There are more places to get them. You just need to search vsr10 inner barrels. And look for the length you want
![FORTNITE CLASSICS IS BACK! Fortnite Item Shop [November 15th, 2024] (Fortnite Chapter 5)](http://i.ytimg.com/vi/RbQURbeFwqs/mqdefault.jpg)
I've been upgrading my mbo3 for years now and I still am working it
I will say Ive fortunately had little to no issues with parts compatability
Yea, War (the person in the video) had also basically no issues, except for the trigger unit misfiring.
We are working on making the last part in the build series. We just need to find the remaining parts.
Hi, i have a MB03 as well. I was thinking about uprading the inner and the outher barrel, i don't know yet what to get, you have some suggestionor what can i search to be sure if it compatibile?
If you're looking for inner barrels, look up vsr-10 inner barrels and find what length you're going for. And for the outer barrels, the only ones that I know of are by maple leaf and Action Army.
Awesome another canadian were are you located
We're located in Northern BC
Thanks for making this video. I'm considering VSR platform and trying to decide between inexpensive clone (WELL, CYMA, JG, HFC) vs more expensive TM or Action Army T11. Regarding the WELL MB02 (300mm barrel) or MB03 (430mm barrel), why did you decide to reduce your barrel length? I'm trying to decide which length to get.
I reduced my barrel length because I'm using a suppressor. If I were to use the normal length the whole rifle would be too long for me, I would be hitting and striking the barrel against everything.
Based on past experiences with the Ares Stricker having both a long and short barrel I enjoyed more the short barrel because of maneuverability.
But what you could do if you get the same rifle I did you can change the inner and outer barrel to a shorter length or possibly longer if there is one, but that's entirely up to you.
6:14 The lower the degree the better it hops every bb. But, you need a stronger degree for higher fps. The lower the degree the softer the material the higher the degree the stronger and stiffer the material
Sorry for the mix up.
Can i put on rail 11mm and 22mm scope ?
The rail in 20mm so if you get a scope that can fit 20mm you should be good
Now I've been reading the Well MB03 actually uses a 500mm inner barrel instead of the normal 430mm used by other VSR clones. Any idea of the inner barrel lengths of the MB03 and MB02?
From what I found the inner barrel on the MB02 is 300mm and the MB03 has a 510mm inner barrel. I reduced mine to 300mm.
@@thefourhorsemen04 thanks for the info. Those are the same dimensions I've found. The MB03 is about 3 inches longer than a normal VSR10 but the MB02 is similar to the G-spec. Not sure why Well went with a 510mm barrel. I have a new AA 6.01 430mm VSR barrel I can install but the outer barrel will be too long. Oh well, MB02 is a great price! Thanks again.
Awesome hope you enjoy and have fun
Do you have a link to the barrel
andysairsoft.ca/index.php?route=product/produc
There are more places to get them. You just need to search vsr10 inner barrels. And look for the length you want