Airsoft Tokyo Marui VSR-10 Upgrade
HTML-код
- Опубликовано: 27 июл 2024
- A near complete overhaul of my very used Airsoft Tokyo Marui VSR 10 Pro Sniper Rifle.
Parts installed:
- Maple Leaf 428mm Crazy Jet barrel
- Action Army Hopup chamber
- Maple Leaf 70 degree Monster bucking
- STALKER Panther Concave Nub
- Maple Leaf Enlarged Magazine Catch set
- Maple Leaf Strengthen Screws
- Laylax PSS10 Spring Tensioner
- Laylax PSS10 Silence Piston Cusion Dampmening Sorbo Pad
- Action Army Fluted Barrel
TDC (top down center upgrade) • VSR 10 TDC Hopup Turre... 
Спорт
Possibly the best install video I've found so far. Thanks a lot!!
Hey Richard thank you very much hope it helps you out for your upgrade :)
Love the vid....Can’t wait till you can get back on the field
Thank you Blood hound :) and I know the feeling I can’t wait either haha I’m starting to go shack happy lol.
kokosaysnono Would you like me to get some of your best moments and make a video out of it?
Well done vid. I have an M24 Snow Wolf, first airsoft rifle (although I grew up shooting real firearms.) I only target shoot, and pest control, no field games so I'm mainly interested in accuracy and consistency. Very helpful vid, thanks for sharing!
Thanks David, glad it helped you out and they’re fun to plink around for sure gotta new those pests under control too haha
This is the video I wish I had found before I started modding my VSR. 😅
Nice video great precision u gave me a idea of using those spacers for spring guide to get around 0.99/98 j because I'm in Italy
1j on sniper F
Nice!
Great video ! Thank you for making it. Where did you buy the Sorbo pads ?!
Hey Max thank you very much, I got those online from the skrimshop Netherlands.
i would recommend against a spring upgrade with the original cylinder, mainly because it will eventually break. It was not designed for more than 1 joule springs, i think it is an aluminum body and head(correct me if im wrong) and you need steel for stronger springs or it wont last long.
Hey thanks for the advice and checking out my video. I’ve heard the threads can strip going 2.3+ joules over time. I was willing to take that chance as I was planning to upgrade the cylinder anyway when I had the budget for it. It never did break but I did eventually upgrade to a new action army cylinder to match the barrel. Im guessing when you drill out the hole to upgrade it your weakening the existing threads combined with it being aluminum. This particular unit was running close to 2 joules for 7+ years on that original cylinder. It could just be luck of the draw but good advice it can’t hurt to upgrade the cylinder if / when you have the budget for it.
Nozzle is brass, and cylinder is some weird material too
i would recommend to put the barrel guides last and push them with some rod just where you want them... I doubt they are in the same position after you put evertthing in...
Thx for the tip and watching the vid. I feel I also could have added some silicon to the orings on them which would have made that process a bit easier haha. Happy holidays hope all is going great for you.
参考になりました。
I'm glad it helped you out. Thank you for watching :)
This comment is for the people that has no airsoft upgrading experience
If money is not a problem and you want a gun that is good out of the box. You should check out
1.maple leaf mlc338
2.ssg10/ssg24
3. Action army aac t10
If you dont have that much money and ur budget is around $200 I recommend
1. ares amoeba striker s1/ striker s2
2. Asg mcmillan m40a3 (I dont recommend this that much)t
3.Echo 1 asr
4. Jg bar 10 (just change the bucking and youre good to go)
And if you dont have money
Just throw some bb's :)
super good video fun to watch and informative!!! i m looking to upgrade my hop up chamber too but i m hesitating between the AAC like you or the Maple leaf one...apparently the AAC one is better but the fact that you have to have a allen key with you and take out a mag to adjust the hop up is annoying that is why i m still hesitating...any feedback on this? thanks
Hey thanks for checking out my vid. I'm agree with the annoyance of having to use an allen key / take out the mag to adjust the hopup. Since this video was posted I have currently installed a TDC (top down center) mod for the AAC hopup adjustment. It's the Gunsmithy TDC mod which is literally a turning nob on the top of the barrel which works amazing for quick tuning. I recorded my install of it and plan to make a video on how to install it but I'd like to record some test firing shots as I didn't get any in the last video which I'm sure people were hoping to see.
@@kokosaysnono oh i d love to see that video about the tdc!! i have it on my striker AS02 and really love it!! do you have to drill something though? i can't find a shop that sells that here in europe though :(
@@SololaneMvlog Nice my buddy has the AS02 and indeed you do have to drill through the barrel :) I'll admit it was sketchy haha but I managed to drum up enough guts to go for it and it was a success. I probably measured 100 times first haha but better safe than sorry ;). I ordered the TDC from the Skrimshop in the Netherlands, they might actually be closer to you than me as I'm in Canada. I will definitely be making the video for the TDC I just might have to film the test fire footage during the Canadian winter lol if I don't hurry up.
@@kokosaysnono yeah it sounds kinda hard to do!! don't worry upload it when you can, anyway we will be home here as we are going to be back in confinment because of the corona . pretty sure of it..we are again not allowed to play airsoft sooooo...yep maybe won t be able to before next year... hopefully not we ll see. thanks anyway, i ll keep up for your videos! have a nice one
@@SololaneMvlog Thank you and stay safe and healthy during these crazy times. The hardest part was the measuring to find the right spot to drill. It was a fun project to do during our lock down as I had lots of spare time for the attempt. Sorry to hear you can't play airsoft atm but that's understandable :( Hopefully everything is back to the norm by next year and we'll all be out enjoying the sport again.
Hey Koko, you think you'd be able to do the same build for a JG bar 10? I'm 99% sure it's a copy of the TM vsr 10
Hey thanks for checking out my video :) I believe you are correct the JG Bar 10 is a clone of the TM vsr 10 so most of these parts would work , AA hopup chamber, crazy jet barrel, maple leaf monster bucking , either nub tensioner maple leaf or panther stalker. mag release. The cylinder parts i'm not 100% but from what I read they should work as well. Mine already had the LayLax PSS10 Zero Trigger / piston installed which should be compatible too. I'd say research each part to be 100% sure but so far it seems they're compatible.
You sound a lot like the dude that eats MREs from past wars! :)
Steve1987mreinfo?
@@razbiton173 that's the guy!
Too funny I’ll take that compliment he makes great videos I’ve been subbed to him for awhile haha.
@@kokosaysnono it definitely wasn't meant to be an insult. :)
@@dansandy7670 All good I didn't take it that way no worries haha. What's even funnier though was when this last comment notification popped up it cut off at " it definitely wasn't meant to be" and I thought ah oh here we go hahaha.
Question I have fully upgraded my vsr-10 and I am now having a problem with my bbs not being consistent what should I do I am running a m170 spring and .30 gram bbs should I try running heavier bbs with the upgraded nub for the aa nub???
How’s long ago did you upgrade ? If the issues started right after the upgrade and you did cylinder work it could be grease getting in the bucking. If it’s been a while since the upgrade it could be the bucking is wearing out. Can’t hurt to try different weights to see if the results change, clean out the barrel in case it got dirty, add some Teflon in case the air seal is now an issue and if using the aa nub try reseating it as maybe it wasn’t lined up properly when the arm was put down or is catching on the edge of the HopUp window when the arm pushes down.
What is the term for the "Inner barrel Guides" to help with stabilizing the inner barrel. When I search inner barrel guides online I just find comparisons of different inner barrel types.
Try searching for “barrel spacer” :) and thanks for checking out my vid as well
Hi!, how long is that stock cylinder can last with the M150 spring?
Hey thanks for checking out the video. That’s a good question this particular cylinder is like 15 years old and housed a number of different springs over the years with zero failures. I tried working the m150 in for a few months but it was still shooting hot around 2.4 joules where I need to be at 2.3joules (500fps with .20g) I’ve since upgraded it to an action army cylinder mainly for cosmetics and the fact I wanted one without a hole drilled in the side. I plan on making a part 2 upgrades video for that including the install of a action army piston and tdc mod. I may cut the m150 just to get me under the 2.3 joule requirement as my old cut spring has me around 2.10 joules with those spacers added.
@@kokosaysnono thanks for the reply!. Well, i don't have a vsr10, instead i have a echo1 m28, and one day I put a laylax M150 spring, but the cylinder top part starts to deform, so I put a M130 and the cylinder has no problems for now
Oh no that’s no good sorry to hear it deformed your cylinder. I did read online that putting too strong a spring in can cause issues with stock parts but I think they were going over 500fps when related to the vsr 10. Things like the stock trigger sear would fail , cylinder nozzle threads, spring guide. I’ve yet to experience any of those failures myself but my spring guide and trigger assembly were already upgraded when I got my vsr. It all comes down the the quality of the metal and as they say “ they don’t make them like they used too” could be why my old stock one is tougher than say what the new stock ones come with.
This'll be the end goal in a few years. Meantime it'll be GBB and mk23 stuff.
Nice I love my Mk23 I did a tdc upgrade to mine but haven't had the chance to actually game it yet :) so I plan to pair it up with this vsr10. I'm still trying to figure out how to carry the 2 of them as the mk23 with silencer is so long but so quiet ;). Thanks for checking out my video and stay safe and healthy in these crazy times.
@@kokosaysnono Yeah the mk23 is chunky but it does through out the bbs when upgraded. You need to pair the mk23 with the nvg setup. I'm sure that'll be interesting to watch. Also if you do need spare mags, get the clone ones as they allow for higher pressure gas unlike the TM ones.
What fps gain did you get? Compared to stock
Initially I got 3joules until I worked the Spring in then I was getting around 2.3 joules of energy which was exactly what I needed 500 FPS shooting .20 except I shoot .45 with it. So the fps will be lower but joules close to the same. The stock cylinder has been known to break overtime shooting above 500 FPS or around there ( nozzle threads can fail) so it’s good to upgrade the cylinder as well if you plan on shooting higher FPS/joules
You sound Canadian if you are where did you get these parts from can’t really find any places here
Good ear Indeed I am Canadian:). I got them from a few places. Divisionxp (Quebec) and the skrimshop nl which is in the Netherlands.
kokosaysnono how much is the shipping from the Netherlands
Dylan t it was pretty reasonable about the same as shipping across Canada. It only took a couple weeks to get here as well which was great. I’ve ordered multiple times from them and have no complaints.
Haven't commented in a while how you doing Koko
All good bud thanks for writing :) I can't wait to get back out and play again this lock down can't end soon enough :). How have you been ? I hope all is well and stay safe and healthy :)
if i upgrade the exact same way could i shoot .46 bbs at 80ish yards?
Pretty much that.
You will also want a Bulltrigger and the Lambda cylinder set from evike.
Also, instead of a Maple Leaf barrel, the Lambda 6.01 should be a little higher power and be a little more accurate depending on what you do.
Silicone Sword thank u bro
Silicone Sword would it still be as good if i used a action army trigger unit and action army 6.01 barrel?
@@lathanlang7922 I would not recommend the Action Army trigger unit as people tend to have issues with them.
Bulltrigger is like 130$ shipped, and it gives you up to 15% more FPS.
As for the barrel, I don't really recommend Action Army since the bore quality isn't very good.
A Crazy Jet will be perfectly fine, but Lambda will be better and not cost too much more if you use coupon codes.
If you are in America I would highly recommend Evike for most of your stuff and for the trigger you should just search Bulltrigg.
Hmu on Instagram @silicone_sword if you need any more help with your rifle.
Silicone Sword ok sounds good i'll dm you my name is lathan.lang
Would've been nice to see a before and after test fire and Chrono. Regardless, good job on this! What were your results before and after?
Agreed that would have been good to include and thanks for checking out the video. I did some results footage in the following video when upgrading it to use the TDC HopUp tuning. VSR 10 TDC HopUp Turret Installation. Without the TDC I found it a pain in the butt to dial in the HopUp haha. Better results with the TDC forsure
where did you buy all of these parts from?
Hi Gage, Thanks for checking out my vid I got the majority of the parts from skrimshopnl and divisionxp.
What is the scope? I have a really bad scope with terrible eye relief.
Hey Thanks for checking out my vid Victor. Unfortunately it came painted / used when I got the vsr. However if I were to guess it’s something like a 3-9X40MM RED GREEN ILLUMINATED SNIPER SCOPE. The eye relief on mine is about 2ish inches.
@@kokosaysnono it's annoying since I need to jam my head all the way till my goggles are touching the scope to see anything. Everyone I do NOT recommend the NCStar shooter series P4 sniper scope. It is less than garbage for $50. Wish I donated to charity or homeless.
Yeah it’s hard to find good eye relief for sure especially for when wearing goggles. I use shooting glasses which helps me get a little closer but depends on if the field allows them.
Will this work on any VSR-10? I have the CYMA VSR-10 version and I hope it could work with that
As far as I know they’re compatible with tm vsr clones. The cylinder upgrade might be diff for the cyma But there are some vsr sniper forms that would probably have some good info on any issues with the cyma
@@kokosaysnono do you know where I could find those forums, please? I'm completely new to upgrading airsoft rifles and I don't know much technical stuff about this.
Could you do a cost breakdown?
It’s been awhile but I’ll see if I can recall and ball park an approximation :)
Can the tm vsr10 stock internals handle a 550 fps spring (0.2bbs)
I wouldn’t recommend it, the cylinder could fail over time “threads strip”. Trigger sear could also be an issue with the upgraded spring.
@@kokosaysnono would you recommend buy the TM vsr10 for someone with a tight budget and plays in sites with 550 fps limit for snipers?
I love my tm vsr10 and what you’ll find with pretty much all snipers is you buy it then upgrade the internals. Doesn’t have to be right away you can always pick away at it. May want to look for a used one too that might already be partially upgraded. The clone models are cheaper and you can put most of the same parts in them so you could save bucks their to put towards upgrades as well.
@@kokosaysnono TYSM for replying to my questions, been a great help.
Is that ok only the piston, spring guid and spring change and the cylinder tock?tnx
Hey Mark thanks for checking out my vid. Yeah depending on how much your going up in spring power the stock cylinder is still good. Since this vid I’ve actually upgraded the cylinder and piston to an action army one but not because the old one failed. I just wanted one that didn’t have the hole drilled out of the side and was newer as the original was getting pretty old for mine. Depending on the spring guild / piston you should just make sure they’re compatible with the old cylinder but I never ran into issues myself.
Nope these weren’t the edgi parts. I believe with edgi you need to upgrade the cylinder from the original vsr TM.
Can i change only the piston the spring guide and sear only amd m150 spring ? ? Is that ok ?
You use zero degree trigger of aac?
Can i usee three iron sear for aac piston ,spring guid and m150spring
I am going to upgrade my TM VSR-10 and made a list of parts, am i missing something?
Please help, i am not a very technical person
MAPLE LEAF CRAZY JET BARREL SYSTEM (GBB, VSR, AEG) 430 VSR
NINE BALL VSR-10 HOP UP BUCKING (ALSO FITS P226, HI-CAPA, G26, SOCOM)
ACTION ARMY VSR-10 CYLINDER KIT
ACTION ARMY VSR-10 SPRING GUIDE
ACTION ARMY ZERO TRIGGER VSR-10
ACTION ARMY VSR-10 M150 SPRING
ACTION ARMY VSR-10 HOP UP CHAMBER
Nice list you may want too get sorbo pads and an omega HopUp nub or STALKER Panthera Concave Nub as well if your doing that full upgrade.
@@kokosaysnono Ok, but the store i am using does not have STALKER Panthera Concave Nub but Maple Leaf Omega Hop Up Tensioner Nub. I guess it works aswell?
Yup that will work I prefer the panther as it fits the window perfectly but the maple leaf is good as well just takes a little more fiddling to get it in place :)
@@kokosaysnono Like these? www.airsoftatlanta.com/products/maple-leaf-aeg-hop-up-tensioner-omega www.airsoftatlanta.com/products/sorbo-pad-cylinder-head-damper-aeg-version-2-3
Yup those are what I was talking about. If they say their for the vsr you should be good.
Tell me, pls, what silencer do you have?
I believe it’s the stock original gspec suppressor but this vsr has had 4+ owners before it made it to me so I can’t be 💯 sure on that unfortunately. It’s been painted a few times as well so I can’t find any markings on the suppressor. This puppy is probably 15+ years old and still rockin :)
Will these also work with the JG Bar10?
Hey thanks for checking out my vid, they should work with the Jg bar10 yes. I had someone else writing about installing these in their jg bar10 and they were successful.
@@kokosaysnono No problem it was a great video! Awesome thank you so much for the response. Keep up the good work!
No test fire at the end???
My bad :) but I did some tests with it at the end of my TDC installation video ruclips.net/video/k83lSGdkgp0/видео.html
5 years ago buy a TM now days just get the SSG10
5 years... this puppy was bought over 10 years ago :) I’ll stick with old faithful but I’m sure the ssg10 is fun to use as well.
@@kokosaysnono no 5 years ago TM was the only snipers and AEG' to buy but now days there are better guns out of the box for cheaper but no one has come close to their HiCapa still
Where are you from? Your voice is so interesting.
Well thank you kindly Justus :) I'm from Nova Scotia Canada.
Cool. My two favorite airsoft RUclipsrs are from Canada. You and House Gamers
House of gamers makes great vids for sure and thank you very much for that compliment that’s awesome I’m glad you enough my vids bud.
What silencer do you have
Hey ghost :) It’s just the TM gspec mock silencer painted.
where can i buy this parts?
Hi Vince, Skrimshop in the Netherlands was where I order most of them from.
what was the fps after upgrade?
Hey Rana thanks for checking out my vid. I put the 150 spring back in and worked it in so the joules are now 2.3 with .43g bbs so that’s around 340 fps. So if it was using .20g BB that’s 500fps
@@kokosaysnono cool, i upgraded my L96 fully but after while the aim went off prob need to use clamp and test it properly 😁
@@cathalmire Yeah the nub could have got un-aligned or might just be a simple barrel cleaning. Too much grease in the cylinder can have it come out the nozzle like mist into the barrel / bucking / hop up unit which can cause the curving / inconsistency.
Show us you shooting iiiiitttt :D
I use it in the last video I uploaded :) but I plan on doing a specific video to show its performance after the upgrades. I’ve since done a few more upgrades like a new cylinder and piston so that will be in the vid as well. Along with a tdc adjustment upgrade that I’m currently working on. Thanks for checking out my vid as well and hope all is going great :)
@@kokosaysnono going to watch it now, thanks for your awesome streamlined video so easy to follow and satisfying to watch! Looking forward to the next video :)
can this shoot .46 bbs?
It can shoot .46 but it’s about finding that happy medium sweet spot. Between spring power , the type of bucking, weight of bb and cylinder air volume. I’m limited to 2.3 Joules of energy which is approx a .20g bb shooting 500fps. Moving up to .46 you could start losing range and/or speed to the target. The 70 degree bucking I’m using recommends between 360 - 460fps setups. I’m going to be a bit below that with .43s shooting around 330fps. If I get some .46s I’ll test out the diff though. So many factors it can be a lot of trial and error haha.
kokosaysnono yeah i understand, i'm building my own VSR-10 in a week, what's your instagram or anything i can contact you with, i have a couple questions about this before i build
Kokosaysnono is my Instagram or you can find the link on the main page of my YT channel. That’s awesome you’re building your own it’s fun to do and you’ll learn a lot about it’s inner workings that way for sure :). Pop me a msg if you have some questions and if I can help with some advice I will.
kokosaysnono my IG is Lathan.Lang
Your sear stock ?
My sear is the one that comes with the Laylax PSS10 ZERO Trigger 90 degree
how much joule does it shoot?
Hey Thomas thanks for checking out my video. It’s now shooting 2.22 joules with 0.43g bbs.
@@kokosaysnono thnx dude i just bought a vsr10 pro
No worries and good choice it was fun to upgrade and to use :) also I ended up putting the Action army m150 spring back in and working it in a bit by leaving it cocked for a couple hours. That’s what the Joules are now after working it in a bit ;).
where did you buy all of the parts?
Np a couple different spots. Skrimshop in the Netherlands and divisionxp in Canada.
Can you recommend me some vsr10 stocks?
Hmm when you say stocks are you referring to the entire lower body/stock as they’re one piece?
@@kokosaysnono no i mean the stock the plastic piece of thing that holds the gun
Haha sorry I'm a filipino its kinda hard to explain it in english
@@migo9625 haha no worries bud I've only used the stock I currently have but I looked into the MLC-S1 stock. It's pricey though but comes with more features and is bigger :)
@@kokosaysnono thanks bud
Last one question
Do ya think I can modify a m24 stock to make it work with vsr 10 or is there any company that makes a m24 style stock for vsr10
I personally don’t know anyone that has done that mod. Looking online I see some old forums pages of people taking a ca m24 stock and modding it. They mention its discontinued though so probably be hard to find.
How many fps?
The m150 will shoot hot until it’s worked in but it’s now shooting .43g at 2.20-2.30 joules which would translate to 500 FPS with .20g. I left the spring compressed for a few nights. Brand new before being worked in it was doing 3.0 joules.
Silencieux ?
Good question it came with it when I bought it used so I’m not 100% sure but I believe it’s the TM gspec mock silencer.
not impossible because the silencer of the gspec does not mount on the barrel flute aac .... shows under the foam green fabrics if there is a mark
At least 4 people owned this one before it landed in my hands so I’m guessing someone upgraded the outer barrel so they could use a suppressor. I then upgraded the outer barrel to the AAC fluted which has a removable adapter on the end that allows this silencer to attach. It’s painted and I can’t find any markings on the silencer but it screws on ccw if that helps :)
Fps of that sir?
Good day sir :) thanks for watching my vid. I ended up putting the 150 spring back in but it shot hot at 3.0 joules so I worked it in by leaving it cocked for long periods of time, 24 hours a few times. The joules are now 2.3 with .43g bbs so that’s around 340 fps. So if it was using .20g BB that’s 500fps
what silencer are u using ?
I thought it was the tm gspec but since it was painted I couldn’t find any markings on it. It’s basically a mock silencer that threads ccw and fits the action army flutted barrel.
Pshhh you actually install the stuff rather than just select a different part in a drop down menu that will get installed right away? Noob ;)
I see you've begun to buy parts during the whole airsoft apocalypse like me, I've already bought a vortex red dot, different mount for it, lbx duffel, new rail, and so much other stuff I don't want to talk about lol so much money
Haha so true :) and as much money I’m saving being locked inside it’s still easy to spend it that’s for sure. I feel like we will be seeing a lot of tuned up equipment when the seasons finally allowed to start lol.
kokosaysnono very true, saving a lot on other random daily things I don’t need to buy and now it’s going towards other purchases when I think I am saving it lol