Trick How to Keep Your Glue Down Wood Floor Installation CLEAN MrYoucandoityourself
HTML-код
- Опубликовано: 7 сен 2024
- This video is for everybody who has a problem with dirty glue down engineered floor on concrete installation. How to keep it clean? Learn this simple trick! Previous MrYoucandoityourself video: • How to Level a Plywood...
SUBSCRIBE FOR MORE VIDS! www.youtube.com...
ALSO, FIND ME HERE:
Visit us www.hardwoodflo...
/ mryoucandoityourself
/ ovisha
------------
STUFF I USE TO MAKE VIDEOS:
Canon T5i - amzn.to/2i3ptu5
Favorite tools:
1. Woodworking:
- Dewalt Miter Saw - amzn.to/2i7JonF
- Miter Saw Stand - amzn.to/2hQbdDM
- Dewalt Table Saw - amzn.to/2h3aOgy
- Milescraft FeatherBoard - amzn.to/2kjsvIC
- Router Table - amzn.to/2ikRmO2
- Dewalt Miter Saw Crown Stops - amzn.to/2hObQOa
- Pin Nailer 23-Gauge - amzn.to/2ibSUds
- Dewalt 18 Ga nail gun - amzn.to/2i7TTaa
- Dewalt 16 Ga nail gun - amzn.to/2h33B06
- Dewalt circular saw - amzn.to/2jkgG80
- Compressor - amzn.to/2ihgl0X
- Compressor hose - amzn.to/2kOlyyl
- Ridgid Vacuum - amzn.to/2i7HWRZ
- Festool 36 Auto Clean Vacuum - amzn.to/2jt9jX0
- Makita Jig Saw - amzn.to/2i7Oe3V
- Makita Cordless Tool Kit - amzn.to/2i2oNVF
- Laminate cutter - amzn.to/2h3A6LG
- Rubber Mallet - amzn.to/2i7mnBa
- Rockwell Versacut Saw - amzn.to/2h3zTYB
- Fein Multimaster - amzn.to/2gVcZQ0
- Undercut Saw - amzn.to/2i3poqc
- Angle Grinder - amzn.to/2jXLnMh
- Sliding T-Bevel - amzn.to/2i3qMJu
- Hot Glue Gun - amzn.to/2hOEuz2
- Adhesive Gun - amzn.to/2hOEoI4
- Construction Adhesive - amzn.to/2hOFeEz
- Wood Glue - amzn.to/2i3vqH4
- Tongue and Groove Glue - amzn.to/2hC8bD9
- Heavy-Duty Utility Knife - amzn.to/2kIvPvY
- Duct Tape - amzn.to/2jk6WdU
- Scotch Masking Tape - amzn.to/2kMnA6p
- Clamp - amzn.to/2lqwJxL
- Irwin Clamps - amzn.to/2mWmmDE
- Water-Based Spray - amzn.to/2lsKSNZ
- Bostik Best flooring glue - amzn.to/2kLc4U6
- Waxed Paper Underlayment - amzn.to/2iiCi3m
- Laminate Flooring - amzn.to/2mh4fdX
- Flooring Underlayment - amzn.to/2lYSXZd
- Finish Stain Marker - amzn.to/2n2FEWw
- Floor Strap Clamp - amzn.to/2nYcCLU
Thanks for watching! Please give this video a thumbs up, leave a comment and add to your favorites! Please share this video with your friends, family, and animals it really helps me out! =]
All MrYoucandoityourself videos are here: www.youtube.co...
Visit my website: www.hardwoodflo...
Trick How to Avoid the Glue Marks During Your Wood Floor Installation MrYoucandoityourself
Hi Sir, the best channel on RUclips thanks for sharing. I have one question please. I am going to glue down engineered hardwood floor myself. I had a professional team come in and do the self levelling compound so good to go. Do I need to prime the floor before glue down?
Hi Richard,for subfloor leveling you have to prime, but for glue down installation you dont need it, because most of brands of flooring glue stick to subfloor very well.Thanks!
MrYoucandoityourself, I have another question. I am starting against a wall, is it best to run the tongue towards me as I work down the room or the other way around? Many thanks 🙏
Yes, you are right.
Thank you for sharing openly your trade secrets. One of the best channels on a RUclips!
OK, Thanks!
My friend. We share many strong traits and knowledge. So much respect for you to share. I just recently found your channel. When you say muscle memory for the spreading the glue, its a highest level tip. People learn from you. Thank you for your efforts.
I appreciate that! Thanks and welcome!
Thank you. Hands down best tutorial!!!! I’ve watched many!!!!!!!
I am very happy to help!
Great tips on staying clean and not sticky. Would love to see a video on selecting whether to have a floating floor instead of a glue down floor. Thanks.
OK, I 'll think about it. Thanks for watching!
Beautiful, this tip helped me out big time !!
I'm so glad!
Beautiful job, you can tell a lot about the work a guy does by how clean he can work.your a professional sir.
I bet the bucket does not show up late to work, great tip.
Thank you very much!
Just Brilliant - great tips. thank-you for sharing.
Thanks for watching and commenting!
Thank you for this tip.
You are welcome!
I know Glue is hard work, however, the end results speak for it self, I am currently installing 1750sq in my house, I love the solid feel of the floor, my friends ask me if it is tiles !!!
Great!
Amazing
Thanks!
Very easy technique how to keep your floor clean during glue down floor installation. If you use another technique, just share it!
Nice work . Thank you
Thanks for watching!
Hello and thanks for sharing! Great job!
I’m about to try install (first time) engendered hardwood,Just wanted to ask in which cases have to use nails,and would like to hear your opinion about nails
Thank you
Hi Eugene, I am not doing often nail down. For solid wood nail down is ok, but for engineered hardwood floor the best way glue down or floating type of installation. Thanks!
@@MrYoucandoityourself
When you have time, pls explain what is floating method
Thanks
P.s. is there any chance to speak with you and my be you’ll install it for me? for sure I’ll pay
If you are living in Vancouver Canada, I can install floor for you, no problem. Floating sister it’s very simple like laminate installation. Floor freely moving because not nailed and not glued to the subfloor.
@@MrYoucandoityourself
Thank you, unfortunately I’m not in BC I’m in ON
This is the same method I use to install solid wood pine flooring. Always measure a 1/2" back from the edge of wood and pop a glue line that way glue does not go past the wood edge and get in the way for next run, so if you need to stop for the day . There will be no glue that would have to be cleaned up .
Hi Barry, I thought I am smartest guy around the world, but not....:-( Thanks for watching and commenting!
I'm planning to glue laminate floor (12mm).. any advice's?
Hi, I glued vinyl flooring two weeks ago. Floor should be overlap without on the short side. Otherwise you and your floor will be with glue from the had to the legs. I cut the short side of the lock each piece for smooth installing. I hope to publish video about it on the end of this week. Thanks
@@MrYoucandoityourself Cool... I was thinking to use a table saw and cut the lock sides from the plank for a smooth install (and avoid expansion), thank you!
You are welcome!
Thanks for the video. Some sites recommend no traffic on the floor for 24 hours to allow glue to set, but I notice you are working from a section that is already installed. Is it ok to be working from a section that was only installed a few minutes ago, or are you only going in that direction for the purpose of the video. Thanks again.
Hi Jason, Good question. Usually, flooring glue settles approximately in two hours. For safety reason, I taped the floor with masking tape and can work right away over the just installed part of the floor. Thanks for watching and commenting!
jason l @1
1/ Is that a tongue and groove or click lock? Can they both using glue down method? Thank you.
Hi, this is tongue and groove. Lock sister possible to glue it, I did it few times. Only one trick- cut off the lock from the front and you can install it easy like tongue and groove. Just take more time. Don’t forget taped floor together. Thanks
love the video, personally don't like glue. In this application can I use underlay instead?
You can use underlayment if you need to install floating system floor.
Can you show how to make your own transitions? I have a bamboo floor I'm going to glue down, but the price they wanted for the transitions was astronomical! I want to just take my own boards and create my own.
What kind of you are interested? Overlapping or reducer?
@@MrYoucandoityourself I think that's considered overlapping. I think I need a "T" section type, because there isn't too much of a difference in height between the two floors. I think that's considered "overlapping" right? I have extra boards. I should be able to make my own. It would be AWESOME if you could make a video showing that! By the way, thank you so much for your video's! They give me confidence to try to do this kind of stuff on my own!
Ugh! I can't believe I was trying to do this without a chalk line. When you have a messy edge, you can never stop without having a lot of clean up when you return. Off to go replace my missing chalk line.
It's work! Isn't it?
Pvc floor?????
Hardwood floor.
Is vethy good floor, no?
Did you wait a while for the glue to dry a little bit or how long to wait before you Install it?
I install it instantly because the glue drys very fast. If you never done it before I don't recommend using this type of floor installation in your house yourself. It is very difficult job.
What is the name of your glue.. Please let me know its brand.
Hi, this is Mapei flooring glue.
Mapei 975
But if its over concrete and you have moisture issues, you need to make make sure you dont have breaks in the glue. Every spread you did there has a gap and can make moisture come up through.
Hi Jared, where did you find a gap?
MrYoucandoityourself in the last spread you did, looked like the last board did not get covered.
I guess you second language is Russian?
Yes!
I guess Russian is the first language of this guy;), nice job, great tips! spasibo
@@eugenekamionsky5412 mine is not, but I like russian language a lot