Yo dawg... this shit is to the point and totally on point. Just got an mk2 which has an amazing workflow from a hardware and software level... but Im native to fl and being able to drag and drop samples and the mixer in fl is way better for the mixing phase. Question for ya, off topic but the midi in and out ports on the physical hardware side.. do you get RCA/audio out as well on that cable?
I DONT THINK SO , BUT IM NOT SURE WHAT YOU MEAN. THE MK3 IS CONNECTED BY USB TO THE COMPUTER, NOT MIDI. AND THE AUDIO COMES FROM THE COMPUTER, NOT THE MK3 AUDIO DRIVER...
Great video...lots of info!! My question is, when you drag the tracks to the piano roll all the instruments go to C5......how do you fix that? Thanks for all the tips, much appreciated!!
twisted whisker when you drag midi it brings up a box u only highlight the number you want, or what I do is before you drag midi make sure you are in Maschines Piano roll view mode then it only drags that one midi pattern
I've come back to this video a few times and I still don't quite understand quite how to get the sounds from maschine into the sequencer on fl. As soon as I route a sound to a mixer, it doesn't appear in the audio export but at the same time, when I transfer midi information into a channel, I can't get it to activate the sound. Been very frustrated with this for a while now, do you have a video on this topic??
Hi, I've just bought your MK3 template with custom FL Studio template. Could you please make a tutorial beat on the custom FL Studio template, just to show how to use it, with Maschine and some different VSTs?
Actually, this is exactly what I was looking for.. bout to get a Maschine, but wanted to make sure the software can be routed to individual outputs... Was googling that and came up with nothing. Good info!
Its a lot of extra steps to move patterns from maschine to fl studio. I tried it once and said f it... may drop ni altogether. Its so damned bad with daw integration. Its a time suck.
thanks for the video. have you had any problems with pitch bend wheel events and getting artifacts added to the recording that you didnt play and being off octave etc with version 2.6.10? ive contacted NI about it and it seems that they act like there isnt a problem. i went to another studio that has maschine jam and they are having the same problem using their pitch bend wheel.
NO I HAVENT HAD ANY PROBLEMS, FL STUDIO NEEDS TO BE SET UP PROPERLY TO RECOGNIZE YOUR MIDI CONTROLLERS PITCH BEND WHEEL. BUT IDK ABOUT THE OTHER PROBLEMS, SOUND LIKE A BAD SETTING YOU HAVE SELECTED
MAKE SURE YALL CHECK OUT MY QUICK TIPS AND MASCHINE MK3 CUSTOM TEMPLATE.: ruclips.net/video/XVEylp0Y59Q/видео.html, ruclips.net/video/fRdlfD1GUOc/видео.html
Mariusz Bibik LOL,YA I HATE TRYING TO USE ADOBE AND PHOTOSHOP AND TRYING MAKE VIDEOS AND PICTURES FOR RUclips AND STUFF ,IM JUST GOOD ON FL STUDIO AND MASCHINE BUT I GUESS YOU GOTTA LEARN BOTH NOW DAYS TO KEEP UP. ILL SAVE THAT FOR LATER FOR NOW JUST WHATEVER WORKS THE EASIEST AND FASTEST, ESPECIALLY WITH YHE LONG RENDER TIMES AND ALL, LOL, SO HERE IS IT!
@@CADILLAKTRACKZ today is my first day with FL Studio (I bought it today) and I'm impressed with this DAW (I already have experience with Live, Studio One and Reason). I absorb every source of knowledge and I thank you for a very useful tutorial. Sorry for my comment, I did not want to be mean :)
MY CUSTOM TEMPLATE FOR MASCHINE AND FL STUDIO:
sellfy.com/p/zIAz/
sellfy.com/p/zIAz/
sellfy.com/p/zIAz/
Yo dawg... this shit is to the point and totally on point. Just got an mk2 which has an amazing workflow from a hardware and software level... but Im native to fl and being able to drag and drop samples and the mixer in fl is way better for the mixing phase. Question for ya, off topic but the midi in and out ports on the physical hardware side.. do you get RCA/audio out as well on that cable?
I DONT THINK SO , BUT IM NOT SURE WHAT YOU MEAN. THE MK3 IS CONNECTED BY USB TO THE COMPUTER, NOT MIDI. AND THE AUDIO COMES FROM THE COMPUTER, NOT THE MK3 AUDIO DRIVER...
Great video...lots of info!! My question is, when you drag the tracks to the piano roll all the instruments go to C5......how do you fix that? Thanks for all the tips, much appreciated!!
twisted whisker when you drag midi it brings up a box u only highlight the number you want, or what I do is before you drag midi make sure you are in Maschines Piano roll view mode then it only drags that one midi pattern
I've come back to this video a few times and I still don't quite understand quite how to get the sounds from maschine into the sequencer on fl. As soon as I route a sound to a mixer, it doesn't appear in the audio export but at the same time, when I transfer midi information into a channel, I can't get it to activate the sound. Been very frustrated with this for a while now, do you have a video on this topic??
MarcadamiaNut Watch my videos, you must not be following along all the way, watch this video! ruclips.net/video/fRdlfD1GUOc/видео.html
MarcadamiaNut ruclips.net/video/g8BNJufvliE/видео.html
Thank you! qt#101 was the one I needed. Love it!
HEY SUBSCRIBERS, IF YOU HAVE ANY QUESTIONS FOR VIDEOS LET ME KNOW, ALSO I LEFT A LINK FOR A DRUMKIT INSIDE OF MASCHINE! HOPE THIS HELP SOMEBODY!
Hi, I've just bought your MK3 template with custom FL Studio template. Could you please make a tutorial beat on the custom FL Studio template, just to show how to use it, with Maschine and some different VSTs?
I JUST STARTED A SERIES OF LIVESTREAMS MAKING BEATS, THEY ARE LONG AND MADE USING THE CUSTOM MK3 TEMPLATE:
ruclips.net/video/hhV8CDqFssQ/видео.html
ruclips.net/video/PGfzvuoT6Mo/видео.html
Great video thank you !🙏🏾
Kareem Coley No problem,make sure you chk out my custom MK3 template for FL studio,and my 100 quick tips for Maschine and FL studio on my channel
I most definitely will check them out
Actually, this is exactly what I was looking for.. bout to get a Maschine, but wanted to make sure the software can be routed to individual outputs... Was googling that and came up with nothing. Good info!
I purchased your template for maschine. Do you have a the template of machine already routed to fl studio?
CHRIS DAVILA the template already is routed from maschine into Fruity Loops Studio
Dude works in music production, fucks up the audio on the video
Lol
I found your comment on Reddit and they was being a holes about typing in CAPS. This was helpful though. Thanks
Glad it was helpful! YA THEY HATE THE CAPS, BUT MY SCREEN IS HUGE AND I NEED TO SEE FAR AWAY
shift and 6 is quantize on the mk3
Dose this work on MK2?
It can but it customized and mapped out specifically for the Mk3, also the Mk3 has more buttons
Its a lot of extra steps to move patterns from maschine to fl studio. I tried it once and said f it... may drop ni altogether. Its so damned bad with daw integration. Its a time suck.
THINK SMARTER NOT HARDER , ALWAYS A EASIER WAY
THINK SMARTER NOT HARDER , ALWAYS A EASIER WAY
thanks for the video. have you had any problems with pitch bend wheel events and getting artifacts added to the recording that you didnt play and being off octave etc with version 2.6.10? ive contacted NI about it and it seems that they act like there isnt a problem. i went to another studio that has maschine jam and they are having the same problem using their pitch bend wheel.
NO I HAVENT HAD ANY PROBLEMS, FL STUDIO NEEDS TO BE SET UP PROPERLY TO RECOGNIZE YOUR MIDI CONTROLLERS PITCH BEND WHEEL. BUT IDK ABOUT THE OTHER PROBLEMS, SOUND LIKE A BAD SETTING YOU HAVE SELECTED
Thanks for the gems. very helpful information
WELCOME CHECK OUT MY CUSTOM MK3 TEMPLATE FOR FL STUDIO ALSO!
I cant get it to record in maschine
HAVE YOU FIGURED IT OUT
iSlam!!! salute brother
CHK OUT MY CUSTOM TEMPLATE FOR MASCHINE AND FL STUDIO:
ruclips.net/video/b7c2jifC_gE/видео.html
MAKE SURE YALL CHECK OUT MY QUICK TIPS AND MASCHINE MK3 CUSTOM TEMPLATE.: ruclips.net/video/XVEylp0Y59Q/видео.html, ruclips.net/video/fRdlfD1GUOc/видео.html
This helped a lot, better than that other guy -_-
WELCOME ,BE SURE TO CHK OUT MY QUICK TIPS AND MY CUSTOM MASCHINE MK3 TEMPLATE FOR FL STUDIO!
You're working in audio and you cant record your voice in right level?
Mariusz Bibik LOL,YA I HATE TRYING TO USE ADOBE AND PHOTOSHOP AND TRYING MAKE VIDEOS AND PICTURES FOR RUclips AND STUFF ,IM JUST GOOD ON FL STUDIO AND MASCHINE BUT I GUESS YOU GOTTA LEARN BOTH NOW DAYS TO KEEP UP. ILL SAVE THAT FOR LATER FOR NOW JUST WHATEVER WORKS THE EASIEST AND FASTEST, ESPECIALLY WITH YHE LONG RENDER TIMES AND ALL, LOL, SO HERE IS IT!
@@CADILLAKTRACKZ today is my first day with FL Studio (I bought it today) and I'm impressed with this DAW (I already have experience with Live, Studio One and Reason). I absorb every source of knowledge and I thank you for a very useful tutorial. Sorry for my comment, I did not want to be mean :)