Hello, what a good job. I'm about to venture to make white cement terrazzo-style dog bowls but I have a question. What pigments can I use that are non-toxic (food grade)?
The sanding is my least favorite part... what about using a electric sander? Also this is beautiful!!! You inspired me to try cement. SO far I have tried jesmonite and hydroflow but they are hard to get in the US so I will try cement
Hi, I have tried the mini sander but it doesn’t work. The cement is too hard 🙁. I think it still the best by hand sanding because you can control the pressure.
I tried doing the gloss finish on mine and it turned out so streaky, what do you apply the gloss sealer with to avoid streaking? I used the 2 inch brush… 🥲
For brush application it's a bit challenging. You cannot put too much pressure else the brush streaking is very obvious. Have you try the sponge brush? The one with the black sponge? It might work better.
how does this mix work using just water & cement? I mean, I'm about to start a small business over this and I'm wondering if this mix is strong enough to handle being shipped you know?? I've seen several videos where people mix cement with plaster & sand to make it lighter and stronger, but IDK.
I have no issue mixing only cement with water. I did it for my craft and even my house tiles. Never break. But I have issue with plaster mix with cement. It crack 🥲
I also have had same problem. I made a tray out of jesmonite and it broke while I sent it to a friend. I heard if you add river sand to you concrete mix or white cement. It makes it stronger
Hi, I never try mod podge before. Better go for stronger and waterproof sealant for soap dish as it may contact with water frequently. For trinket dish I think no issue. I’m glad that my video help u ☺️
Hey! I used a normal varnish or sealer available in Pakistan, for my tray but it broke the trinket tray immediately (leaving cracks). Moreover, my white cement vase would always break from the top/neck during de-molding after 24 hours. Please suggest.
@@BearBearCammy tks so much, that will be great if you are going to show the tutorial of craft made by plaater; your channel is a treasure for beginners of cement craft, can't wait to see more
Hi, i'm using the normal white cement i got it from the hardware store. Mostly Portland brand i would say. And i just adding water for this. You can refer to my Q&Q video if you feel doubt ya. Thanks for dropping by 😀 ruclips.net/video/qU3MXX9hCOI/видео.html
Hello, what a good job. I'm about to venture to make white cement terrazzo-style dog bowls but I have a question. What pigments can I use that are non-toxic (food grade)?
Yup, you can go for the food grade pigment. Mica powder for food will work too.
The sanding is my least favorite part... what about using a electric sander? Also this is beautiful!!! You inspired me to try cement. SO far I have tried jesmonite and hydroflow but they are hard to get in the US so I will try cement
Hi, I have tried the mini sander but it doesn’t work. The cement is too hard 🙁. I think it still the best by hand sanding because you can control the pressure.
Well done 😊
I tried doing the gloss finish on mine and it turned out so streaky, what do you apply the gloss sealer with to avoid streaking? I used the 2 inch brush… 🥲
For brush application it's a bit challenging. You cannot put too much pressure else the brush streaking is very obvious. Have you try the sponge brush? The one with the black sponge? It might work better.
how does this mix work using just water & cement? I mean, I'm about to start a small business over this and I'm wondering if this mix is strong enough to handle being shipped you know?? I've seen several videos where people mix cement with plaster & sand to make it lighter and stronger, but IDK.
I have no issue mixing only cement with water. I did it for my craft and even my house tiles. Never break. But I have issue with plaster mix with cement. It crack 🥲
I also have had same problem. I made a tray out of jesmonite and it broke while I sent it to a friend. I heard if you add river sand to you concrete mix or white cement. It makes it stronger
Loved this video! What microphone do you use to get the nice sound quality?
Original iphone built in microphone :)
Hi can I use mod podge to seal? Beginner and your vids have me ready to try it :)
Hi, I never try mod podge before. Better go for stronger and waterproof sealant for soap dish as it may contact with water frequently. For trinket dish I think no issue. I’m glad that my video help u ☺️
hi, where we can find terrazzo flakes ?
i have a video on how to make this: ruclips.net/video/68EOBmOUcZU/видео.htmlsi=4GjnXEtb87B3FcyH
Hey!
I used a normal varnish or sealer available in Pakistan, for my tray but it broke the trinket tray immediately (leaving cracks). Moreover, my white cement vase would always break from the top/neck during de-molding after 24 hours. Please suggest.
White cement have a very high resistant and seldom break. Do you consider to try another brand?
Hello! May i know if i can get the same result while the cement is replaced by the gysump / plaster? Btw, your video is soothing and inspiring!
I think yes. I’m going to test that out soon too. Please stay tune :)
@@BearBearCammy tks so much, that will be great if you are going to show the tutorial of craft made by plaater; your channel is a treasure for beginners of cement craft, can't wait to see more
Hi, the video was in the mist of editing. I will schedule it on this coming Wednesday GMT+8 9am, Remember to look out for it.
Hi Frankie, plaster of Paris will work but it will not be as strong.
Ohhhh! What sealant should I use? I want to make something like this! =)
I got video on this. Check it out: ruclips.net/video/KrGiUwKG-vM/видео.htmlsi=DwYsoYWGjM9U30ZN
Can you do the same process with cement all and titanium dioxide (to make it white)?
I which i could try it but in my country there are all Cement All. You can use whatever cement you have in your country/region. Technique is the same.
Hey, wanted to ask my tray got some cracks can u help me y its happening.
Hi, there’s few reason why your cement crack. You can refer to my previous FAQ video: ruclips.net/video/qU3MXX9hCOI/видео.html
What is the measurements?
What kind of sealant you used there ! Name of the proctuct seal
Hi, i have included the necessary link in the video description :)
Mold?
Beautiful!!
Nice video and beautifull soap dishes. Can i ask what do you use for sealant?
Yes, I’m using lacquer as sealant
@@BearBearCammy , thank you. Is it specificly for concrete?
@@alinakhunoyan88 not specific. Multi purpose sealant :)
what brand of coating do you use?
Hi, you can refer to the type of coating I’m using. I have made a video on this.
ruclips.net/video/KrGiUwKG-vM/видео.html
@@BearBearCammy Thank you
New sub, love your video ❤
Thank you ❤️
So beautiful.
Thank you ❤️
Hi 👋🏼 which white cement did you use? Did you add anything to it other than water? Thank-you, beautiful soap dish and trinket tray
Hi, i'm using the normal white cement i got it from the hardware store. Mostly Portland brand i would say. And i just adding water for this. You can refer to my Q&Q video if you feel doubt ya. Thanks for dropping by 😀
ruclips.net/video/qU3MXX9hCOI/видео.html
Thankyou for the speedy reply! I'll check the video out too. Have a great day 😀