Thank you so much for this video! I am VERY new to the Silhouette Machine and was having trouble loading the mat and every time I went to cut something the mat kept moving all around everywhere. Thanks to your video, I have finally figured out how to properly load the machine!
You made this set up super easy! All of the free images and the 1 month subscription loaded withe ease. I am now ready to start my very first project. Thank you for a great 1st time user tutorial!
WOW!! I did NOT receive all the items you mentioned with my Cameo 3. I have the cord!! I have had it for 1-2 yrs and just took the machine out of the box because we were in the process of moving to a new home (was "homeless" for a yr or 2) so I did not check or go online to verify what I was supposed to have. Thanks to this video I see I was not given the same items. :-(
The link I clicked was supposed to take me to the tutorial on how to check the blade because no matter what I've tried I cannot get the cameo to cut anything. GAH! I need help that I can't seem to find.
I followed these instructions and mine did not cut. I notice she never mentions to trace your image. This divice will not cut an image that is not traced. So I traced it. And it still didnt cut. What am I doing wrong? Please help. Also, is there a way to change the blade from 0 to 1? I see on my screen that my blade should be on 1 but it is on 0?
@@CreateWithSilhouette I did. I sent that yesterday afternoon. I am waiting for a reply. I am not noticing that the firmware never opened and ran etc. How do I open the zip file and run the new firmware? You can call me if you like - 973.902.7290
I just purchased a Siloutte and I am trying to set it up. When I turned on the Siloutte after plugging it up, the screen will not let me get past the language selection screen. Please help.
dumbest part is how do i remove the foam? to i force it by hand? do i power up the machine and let the carriage move? like how did the carriage disappear for me to move the foam?
yeah watch the video, the steps while i get them are just wrong. Does magic move the head? i mean it makes sense to make the video in a proper order where movie magic doesnt happen. common sense isnt common and movie magic isnt real.
@@CreateWithSilhouette mine did not cut either. I chose the circle. I chose trace select trace area. Solid fill filled in. And trace outer edge filled in. I chose send and the blade did all this noise and dance. I unloaded only to see that it did not cut. What did I do wrong?
What if you already use a cameo 2 so you already have software downloaded? I’m just upgrading to a 3. Is set up totally the same? Will it recognize this or make me reinstall and relate a new account
I am just waiting for my new machine to arrive I already have an older cameo with the updated version of the software on my computer so do I just follow the same process you have showed. I have read that some have lost their library when installing.I don't want to loose all that how do I back that up, not all my cut files are from silhouette studio. Would appreciate any assistance thank you. From New Zealand
Did you ever get an answer as to why your mat was cut even though you followed instructions? My mat is destroyed, and I followed directions. I'm afraid to try again because of wasting vinyl and cutting through the new mat I purchased.
@@CreateWithSilhouette It is not. Guys, she cleary said *SEE-THROUG*. What @TheBalancingMom is asking about is the "transfer tape"; not the metallic vinyl.
Just a quick question, where can I get the designs on the box? Cant find the cupcake or ice creams depicted on the box. Hope some one can help me to get hold of these amazing d designs. Thank you
i had the same problem but then when i was trying to print something and hit send to silhouette then it recognized the printer and downloaded the free images, hope this helps!
hi! i just purchased a cameo 3 and were setting up everything but the problem is when i connected the usb cord from the cameo to my laptop it's not loading my free 100 library content. it says in the instruction that it will automatically load once its connected, but it doesn't. i've also tried to disconnect and connect it again but nothing happened. do you have any idea what i should do? i hope someone could help me. thanks
i had the same problem but then when i was trying to print something and hit send to silhouette then it recognized the printer and downloaded the free images, hope this helps!
Mine just did the same thing and I did what was noted above. I imported a free design from the store and pressed Send to Silhouette. Once it connected to the machine, it downloaded the items.
How about starting with printed CLEAR instructions included IN the dang box?
That would be incredibly helpful!!
That would be great. I prefer to read not watch and was extremely disappointed when I saw no instructions at all.
Hannah Sullivan Same here!
Thank you so much for this video! I am VERY new to the Silhouette Machine and was having trouble loading the mat and every time I went to cut something the mat kept moving all around everywhere. Thanks to your video, I have finally figured out how to properly load the machine!
Yay! That makes us happy to hear! :)
i used this product the software is so easy to use and help me a lot in designing Tshirts
You made this set up super easy! All of the free images and the 1 month subscription loaded withe ease. I am now ready to start my very first project. Thank you for a great 1st time user tutorial!
Just got mine so excited!! This will help me improve my sticker shop 😁
How's it going?
might I add if you flip it over on the bottom there is a Bluetooth device located in the machine when you screw it open
WOW!! I did NOT receive all the items you mentioned with my Cameo 3. I have the cord!! I have had it for 1-2 yrs and just took the machine out of the box because we were in the process of moving to a new home (was "homeless" for a yr or 2) so I did not check or go online to verify what I was supposed to have. Thanks to this video I see I was not given the same items. :-(
The link I clicked was supposed to take me to the tutorial on how to check the blade because no matter what I've tried I cannot get the cameo to cut anything. GAH! I need help that I can't seem to find.
Thank you so much! This was very helpful
Do you know what to do if you buy it from a friend who cant remember if she registered it before and also forgot where and when she bought it? 😅
Will my refurbished machine come with a mat?
My cameo cut until the mat, very low. Can I fix it. The nife is in number 5
You can add material without the mat? I thought you always need the mat to lay out your material
why does my silhouette studio look different than yours? I had a cameo before and upgraded to the 3. Do I need to reinstall the software?
0:53 im on the site and I dont see the silhouette cameo 3 so I cant register mine..
Clear and Concise. Awesome. Thank you.
I followed these instructions and mine did not cut. I notice she never mentions to trace your image. This divice will not cut an image that is not traced. So I traced it. And it still didnt cut. What am I doing wrong? Please help. Also, is there a way to change the blade from 0 to 1? I see on my screen that my blade should be on 1 but it is on 0?
@@CreateWithSilhouette I did. I sent that yesterday afternoon. I am waiting for a reply. I am not noticing that the firmware never opened and ran etc. How do I open the zip file and run the new firmware? You can call me if you like - 973.902.7290
If I unbox a cameo, and the tape is green is it original?
Can you use an image you create yourself instead of the designs on file?
Yes, you can.
I'm so confused I can't register cause it won't accept the Password that I'm typing, please help.
I just purchased a Siloutte and I am trying to set it up. When I turned on the Siloutte after plugging it up, the screen will not let me get past the language selection screen. Please help.
Leanne.ab94 does it show the arrow at the bottom right
@@davionh9830 yeah, but it wont let me click on it ????
@@davionh9830 The ENGLISH selection is highlighted (it is the one I need) but it wont even let me highlight any of the other languages, though.
Leanne.ab94 try holding the power button for 5 secs and trying again if that doesn’t wrk it my be something wrong wit the screen
dumbest part is how do i remove the foam? to i force it by hand? do i power up the machine and let the carriage move? like how did the carriage disappear for me to move the foam?
yeah watch the video, the steps while i get them are just wrong. Does magic move the head? i mean it makes sense to make the video in a proper order where movie magic doesnt happen. common sense isnt common and movie magic isnt real.
How do you connect the bluetooth to your computer? I have a Mac.
New machine and followed the instructions but wot cut
@@CreateWithSilhouette mine did not cut either. I chose the circle. I chose trace select trace area. Solid fill filled in. And trace outer edge filled in. I chose send and the blade did all this noise and dance. I unloaded only to see that it did not cut. What did I do wrong?
anyone can help me please... my cameo status... "checking connection" cannot proceed the task...
how could i get rid of the 1inch indention from the start. pls help me
Can i use my smartphone for the design /images?
Good question
I don't understand why there is no user manual with the product.. I've been at this for over a hour
Can i order this to india???
What if you already use a cameo 2 so you already have software downloaded? I’m just upgrading to a 3. Is set up totally the same? Will it recognize this or make me reinstall and relate a new account
I am just waiting for my new machine to arrive I already have an older cameo with the updated version of the software on my computer so do I just follow the same process you have showed. I have read that some have lost their library when installing.I don't want to loose all that how do I back that up, not all my cut files are from silhouette studio. Would appreciate any assistance thank you. From New Zealand
Thank you so much will do that when I get back to NZ from our holiday in Australia where I have purchased my machine, and start setting it up.
Ok I did everything, so far so good, but guess what?? In the first cut I cut the mat!! I followed all the instructions and now this...
@@CreateWithSilhouette thanks but still same problem, still al the cuts are completely ruin the mat, honesty I'm getting frustrated
Did you ever get an answer as to why your mat was cut even though you followed instructions? My mat is destroyed, and I followed directions. I'm afraid to try again because of wasting vinyl and cutting through the new mat I purchased.
Very helpful Thanks!!
I just bought this machine and I'm starting to have an issue downloading my 100 images...
Hi! Send us a message at silhouetteamerica.com/contact.
WHAT IS THAT "SEE-THROUGH" MATERIAL YOU USED TO STICK THE "HAPY BIRTHDAY" SIGN ONTO THE CARD?
@@CreateWithSilhouette It is not. Guys, she cleary said *SEE-THROUG*. What @TheBalancingMom is asking about is the "transfer tape"; not the metallic vinyl.
@@i.t.577 EXACTLY!
HELP, I turn on the machine and the carriage is making awful grinding noise and wont move!
Laura McDaniel heck for star foam. It is sometimes hidden.
Anyone here from Reyes??
YES
Just a quick question, where can I get the designs on the box? Cant find the cupcake or ice creams depicted on the box. Hope some one can help me to get hold of these amazing d designs. Thank you
how to replace cameo 3 touch screen
thank you
Very helpful... Thank you.
How this Mc Cost ?
I'm also cannot access the 100 free images.
i had the same problem but then when i was trying to print something and hit send to silhouette then it recognized the printer and downloaded the free images, hope this helps!
Makeup Junkie download firmware
Hi, I recently bought the cameo 3 and it isn't working :/
When I plug it in and press the button to turn it on nothing happens.
hi! i just purchased a cameo 3 and were setting up everything but the problem is when i connected the usb cord from the cameo to my laptop it's not loading my free 100 library content. it says in the instruction that it will automatically load once its connected, but it doesn't. i've also tried to disconnect and connect it again but nothing happened. do you have any idea what i should do? i hope someone could help me. thanks
i had the same problem but then when i was trying to print something and hit send to silhouette then it recognized the printer and downloaded the free images, hope this helps!
yes..i can only see the 100 images if im using cutter connected to the computer. thanks for the tip :)
The same thing happened with me.
Thanks that solved my problem as well. Thanks for your helpful reply!
I’m having trouble downloading too
How to know if a silhouette or cameo 4 machine is fake or not legit?
My 100 free images are not loading.... even after I have disconnected and connected the USB cable multiple times
Mine just did the same thing and I did what was noted above. I imported a free design from the store and pressed Send to Silhouette. Once it connected to the machine, it downloaded the items.
font name mam