Wonderfully clear and detailed tutorial. Beautiful neat wire skills. This is something to aspire to do. Hope I can do it justice. Thank you for sharing your knowledge.
I’m so excited to see this, I didn’t notice it till 1am. But when I wake up this is in my to do list. Thank you so much for sharing this project what I see do far it looks like a great tutorial. With great tips. There will probably be an edit when I work this ✌️❤️
Blessings. Eternal life. Nicely done. Ankh thanks for the excellent work of art with copper. Thank you. I learned from the best. 😊. One love Afro G64 lamiert Park Village LA Crenshaw 😇✨⭐💜🔥❤️
This is so neat!!!!!! Somehow though... my frame wires didnt end up as long for the last step to secure the stone 😅😅😅😅😅😅 going to try to get it set somehow. Confused bc i thought it was correct measurements
We can start with the same amount of wire but if your arms and base are slightly wider or your bale a bit longer, then it can vary a bit, I always recommend adding a couple inches to measurements the first time. You'll get it! I appreciate you! ❣️🙏🙏❣️
Thanks Jennifer! I buy a lot of my tools and wire from Riogrande.com but you can find these Chasing Hammers in many places like beadsmith, eurotool, Michael's crafts, etc. Hope that helps!
I'm fairly new to wire jewelry making (a few weeks), and made some pretty nice rings mostly. I've tried to make this project and followed the instructions but for some reason my bends all come out uneven on the arms either one is too long and the other one too short, not sure what I'm doing wrong since I am marking my bends first with sharpie. Any tips? ty
I appreciate this question and reviewed my video... I could have been more clear for sure, here is a post I made for you so you can see how to mark the wires... Please let me know if this helps, there are five images. Thanks so much for reaching out with a great question! ruclips.net/user/postUgkx3edbezQeXEQH3UqP2WzFY8C8-AM3m7bB
@@PerfectlyTwistedJewelry Yes helped a lot thank you! It did not come out as perfect as yours but it's not bad for my first time making it, looks so much easier to make in the videos lol. I got pictures wish I could post them up on here to show you.
@PerfectlyTwistedJewelry How do you get the half round so neat? I've been trying but definitely struggling with it! When I go to clamp it down it looks uneven and messy 😂
Half round can be hard to work with, it has a direction, so the focus will be to keep the flat side of the half round against the frame wires and the curved decorative side, facing up. You can sub with a weaving wire like 26 or 28 gauge also. I hope that helps!
Thanks, Judy! It's about 2.25 inches from top of the bale to the bottom of the pendant and about 1.25 wide. I hope that helps! Great suggestion, I should have put the finished size in there at the beginning. Will do from now on. Thanks again!
Nailed it on the first try, thanks to your teaching style. Gratitude 💗✨
Wonderful! Gratitude back to you Ms. Cheyenne, that makes my day to hear!
Respect for this video perfect plain and simple but yet really good crafting thank you
Thank you MD! Yes... the Key of Life. ⚘️🙏 I'm glad you like it!
thank you, fabulous art!!
Thank you too!
Dios mío….cuanto ingenio….gracias por compartir su arte!!!!!!
So very sweet, thank you so much!
Très beau travail et bien expliqué, un gros merci pour ce tuto!
You are very welcome! Thank you for watching, I'm glad you enjoyed the video!
this is exactly the type of video i was hoping to find. no talking, instead we have clear, well thought out directions we can pause to re-read.
Thanks so much, Joe! I hope you enjoy the project and please subscribe if you haven't already, I'm making a lot more videos this year :)
A great project. You are a wonderful teacher, Thanks.
Thank you so much!
Hermoso trabajo….felicidades y gracias por ese tutoríal !!!!!!!!! Bello!!!!!
Thank you!! Enjoy it!!🌷🙏❤️
I have been asked for this, I will follow this detailed tutorial. Thank You.
Glad it was helpful! Thanks for watching!
This came at the right time! 💜
Thank you Maya, enjoy it!
Fabulous work, I've been looking for this kind of tutorial for creating ankhs
Fantastic! Thanks for this wonderful comment! Enjoy! 🌹💕
Absolument magnifique. J adore🌹🌹🌹🌹
thanks so much!🙏🌷
Great tutorial! Thank you so much for sharing this with us. You made my day!!!
Thanks for this great comment! You made mine too :)
It is really beautiful!! I can't wait to try it. Thank you for sharing your talent with us!!
Thanks so much 😊
Magnificent!!! I can't wait to try this later :)
Hope you enjoy it! Thanks for your comment, Debra! Have fun!
Awesome!!!!
Thank you! Cheers!
Wonderfully clear and detailed tutorial. Beautiful neat wire skills. This is something to aspire to do. Hope I can do it justice. Thank you for sharing your knowledge.
You can do this! Thank you for such a lovely comment, please feel free to ask me questions as you work, I'm happy to help. Have fun!
THANKS FOR SHARING!!! BLESSINGS FROM MEXICO
Same to you! Thank you!
Awesome! Been waiting for this to come out since you posted in the group on FB. lol. Thanks!!!
Awesome! Thank you!
Beautiful! So excited about this. Thanks so much..
So glad! Thank you so much, have fun!
Attempted a similar design and fumbled… 😐your tutorial cleared up a couple things. Thank you for sharing ✨
Glad it helped! Thanks for your comment!
YEAH!!!!. Thank you thank you thank you.
You're welcome!! Thank you too Marti! Have fun!
Thank you for this!!! I will be trying it soon
Wonderful to hear!! Thank you and have fun!🤩🌞
Beautiful.
Thank you! Cheers!
I’m so excited to see this, I didn’t notice it till 1am. But when I wake up this is in my to do list.
Thank you so much for sharing this project what I see do far it looks like a great tutorial. With great tips. There will probably be an edit when I work this ✌️❤️
Hope you enjoy it! Thanks so much T Billy! I count on your input, thank you so much!
@@PerfectlyTwistedJewelry this is perfect timing….I just pulled the video up. And grabbed my tools 🤓✌️❤️
A must try for me thanks
Hope you enjoy, thank you!
Blessings. Eternal life. Nicely done. Ankh thanks for the excellent work of art with copper. Thank you. I learned from the best. 😊. One love Afro G64 lamiert Park Village LA Crenshaw 😇✨⭐💜🔥❤️
Thank you so much!
Fantastic!
Thank you! Cheers!
This is so neat!!!!!! Somehow though... my frame wires didnt end up as long for the last step to secure the stone 😅😅😅😅😅😅 going to try to get it set somehow. Confused bc i thought it was correct measurements
We can start with the same amount of wire but if your arms and base are slightly wider or your bale a bit longer, then it can vary a bit, I always recommend adding a couple inches to measurements the first time. You'll get it! I appreciate you! ❣️🙏🙏❣️
magnifique 😍
Thank you!
This is so beautiful! Any details on where you purchased your hammer?
Thanks Jennifer! I buy a lot of my tools and wire from Riogrande.com but you can find these Chasing Hammers in many places like beadsmith, eurotool, Michael's crafts, etc. Hope that helps!
Hermoso trabajo……..lástima que no los puedo hacer así!!!!!
Thank you!! I hope you enjoy it!🤩🥰
@@PerfectlyTwistedJewelry gracias por ver mi comentario…..sigo de cerca su trabajo,pero los materiales no los veo en mi país…Rep. Dom.!!!!!!
I'm fairly new to wire jewelry making (a few weeks), and made some pretty nice rings mostly. I've tried to make this project and followed the instructions but for some reason my bends all come out uneven on the arms either one is too long and the other one too short, not sure what I'm doing wrong since I am marking my bends first with sharpie. Any tips? ty
I appreciate this question and reviewed my video... I could have been more clear for sure, here is a post I made for you so you can see how to mark the wires... Please let me know if this helps, there are five images. Thanks so much for reaching out with a great question!
ruclips.net/user/postUgkx3edbezQeXEQH3UqP2WzFY8C8-AM3m7bB
@@PerfectlyTwistedJewelry Yes helped a lot thank you! It did not come out as perfect as yours but it's not bad for my first time making it, looks so much easier to make in the videos lol. I got pictures wish I could post them up on here to show you.
@trustworthyjane5243 wonderful!! Please tag my FB business page to share you pictures, I'd love to see! facebook.com/PerfectlyTwistedJewelry
Yay!!!
Yay here too! It's finally done. Enjoy!
Thank you
You're welcome! Enjoy Tashas!
Can this work with an Oval Cabachon?
It should work fine with oval and rounds too, just a small shape difference up top, but the wrap should work the same.
Omg👑✨💜💜💜🥰🥰🥰🥰💋🌹😍😍😍thank you
🤗 Thank you too!
How would you adjust this for a slightly bigger stone? Do i just add abit of extra lemgth to my wires? My stone is 28mm by 18mm ish 😂😊
Thanks for watching, your stone isn't too much bigger, if you added two inches you should have more than enough. Enjoy!
@PerfectlyTwistedJewelry How do you get the half round so neat? I've been trying but definitely struggling with it! When I go to clamp it down it looks uneven and messy 😂
Half round can be hard to work with, it has a direction, so the focus will be to keep the flat side of the half round against the frame wires and the curved decorative side, facing up. You can sub with a weaving wire like 26 or 28 gauge also. I hope that helps!
How large is the pendent once it is complete?
Thanks, Judy! It's about 2.25 inches from top of the bale to the bottom of the pendant and about 1.25 wide. I hope that helps! Great suggestion, I should have put the finished size in there at the beginning. Will do from now on. Thanks again!
Ojalá y pudiera hacerlo!!!!😢
You can do it!🙏❤️
looks like an alien.... hahhaa
(Sudden gasp!)... having not noticed this before, I think you're quite right! :D Thanks for watching and for commenting!
11:12 pm
I give Thankhs 🤲🏿🤎
Thankhs in return! I hope you get Hours of enjoyment from my tutorial! :D
@@PerfectlyTwistedJewelry yes I did 🤎