First step in transforming the Off-Grid Garage into...? Success with my sketchy welding skills.
HTML-код
- Опубликовано: 2 окт 2024
- I started the garage transformation today! First job was to weld this metal beam under the roof structure. Seems to be an easy job and should not take long. Well, the welder constantly overheats and leaves me with 20min breaks to cool down... not great!
I also have to find a solution for the roller door support which needs to connect back to the ceiling. I've got an idea already...
What do you think this all is for?
16-Line Self-Adjusting level. Great for construction and renovation:
off-grid-garag...
And my new self-darkening welding helmet. First time I'm using it, I like it!
off-grid-garag...
Please subscribe and join me on my journey of the Off-Grid Garage!
For more information, please check out my website with links to all the batteries, materials, devices and products I have used in my videos: off-grid-garag...
The 'Buy me a Beer🍻'-link is here (on the website, scroll all the way down):
off-grid-garag... Thank you for your support!
I'm also drinking coffee (not really). But hey, I'm into Smoothies, so that counts, right? www.buymeacoff...
You can also click on the Thanks button under the video to support the channel. Thank you, if you have already!
You can also become a member of this channel (and receive additional content from time to time):
/ @offgridgarageaustralia
T-Shirts, caps, mugs and more in our merch-shop:
off-grid-garag...
**** These are the batteries you are looking for ****
🔋➡EVE LF280/304 LiFePO4 cells 3.2V/280+304Ah: off-grid-garag...
🌞➡Solar charge Controllers, Inverters and accessories: off-grid-garag...
🔧➡Tools, Analysers and Testers: off-grid-garag...
📈➡ Battery Tests and Results: off-grid-garag...
🔌➡Batteries, charger and accessories: off-grid-garag...
⚡➡Cables, Inverters and Electronics: off-grid-garag...
The Sunfunkit DIY battery. Great product to build your own 12V battery. Use OGGA at checkout to get 6% off. More info here: off-grid-garag...
Video review: • The Sun Fun Kit Experi...
Best prices for Victron gear in Australia: Auto Parts Co has you covered.
www.autopartsc...
(they have 4WD parts and accessories too)
Take a live sneak peek at the Off-Grid-Garage in the Victron VRM World (link at top of the page):
off-grid-garag...
My other (German) RUclips channels:
/ offgridgarageaustralia
Please don't leave any links in your reply. RUclips will not publish your comment in this case.
If you decide to send me an email, I really appreciate your time and effort for doing this. However, please consider leaving a comment under my videos instead as I may not be able to reply to your email due to the sheer number of messages I'm receiving.
Absolutely hilarious! "that is why they call it stick welding"! So funny!
As you own an angle grinder you could have easily prepped the area to be welded, nice shiny steel makes for much easier welding. Not to mention the fumes that zinc plating/galvanising gives off. It would have also been pretty easy to make some brackets to bolt the beam up, but would of taken longer of course. Perhaps you're hanging a curtain, or building a wall to make a cold air conditioned corner.
Andy, Galvanized makes bad fumes when welded You should use good ventilation and a respirator when welding galvanized metals we can't loose our solar genius
You might also need to grind away the zinc coating before welding.
You soon learn once you have had zinc/foundry chills.
All went well. I used this gal steel for a long time and never grinded anything away. Some of the welds are over 15yrs old and are still like day one.
@@OffGridGarageAustralia they’re more worried about your brain and not the welds. Inhaling zinc is hazardous to your nervous system. Ventilation and a respirator are necessary. I’m not a welder but my cousin was in the trades for three decades and hated galvanized work.
Andy, remove the zinc before welding. It's healthier for you, it makes welding easier and the welds come out better.
Andy see about getting a Clark mast SQT15-7HP/QTX15-7/HP also known as a 15-meter handpump mast for small wind turbines...
Probably a mini crane for heavy batteries and stuff 😀
That is what I was thinking. Some sort of overhead gantry.
I already have a battery crane!🏗️
Swinging chairs inside the garage😂@@OffGridGarageAustralia
@@netrocker9990 for SPAT calibration💖
@@OffGridGarageAustralia You certainly can't have enough battery cranes! Not you!
A closed off room to house a Small Modular Nuclear Reactor to charge all your batteries over winter. 🙂
Look at those welds!
Battery nr 4!
It’s going to be closed room for cooling the batteries and inveters because lithium gets hit around 30 degrees and above.
Yes and no. Yes for the room and no for the batteries. They are totally fine to 50°.
Think you're putting in a gantry crane to pull the motor out of your Tesla. :)
8:50 I thought everything was upside down in Australia anyway 🙃
Ah, yes, hence welding would be much easier for people from up north!
it is that making welding a lot simpler
I think you are getting comfortable and want a solar powered garage door opener.
Seen from Germany, you are laying out railroad tracks.
If you're making an overhead gantry crane, you might want to build a strap and go under the main beam, and bolt it to top truss. Welds are good and all, but those welds in the center will be taking the full load. And a bolted connection would be much safer. But if you're not making a crane ... never mind. I was a machinist in another life and built many a crane for loading parts on large 6 & 8 spindle gantry mills. 👍
edit: I had an epiphany ... are you making an A/C controlled battery room? You've talked about that before ...
LOL Germany engineering at its best ha Andy!! as to what it is your building, a cool room hopefully! because things are hoting up on planet Earth.
I'm guessing you are going to be building another wall, to add MOAR POWERWALL. LOL
Yes, something like that actually
Andy you know that there are 230vac fans 120mm just connect it on the power switch of the welder
But where is the fun in that!😄
@@OffGridGarageAustralia i knew you where gonne say that but sometimes its easier to take tye easy route 😅
😢 ‘grinder and paint make me the welder i ani’t ‘ easy rhyme for you, Andy
Andy I hope there is no white fluffy stuff near your welds - galvanized steel is notorious for giving off zinc oxide which is very toxic if breathed in - I have a young buddy who put himself in hospital welding a galvanized bike stand - he was in an oxygen tent for a few days it gave us quite a scare
When welding galvanized steel, the zinc coating easily vaporises. This will form zinc oxide fumes that will mix with the air. This gas may give short-term effects to your health which is also known as “metal fume fever”. Welders may experience flu-like symptoms once they inhale the fumes. These may include nausea, headaches, high fever, shivers and thirst. The symptoms will usually go away within 48 hours of exposure.
Yes, there was some white stuff inside the beam. I kept it all in a bag just in case it is important.
Liftträger ... oder ein Träger für einen Flashenzug :)
No. I have the battery crane for that.
@@OffGridGarageAustralia Dann eben das Oberteil für eine Rigips oder Blechwand :)
Putting up a firewall / fire suppression system to keep the batteries segregated from the rest of the garage?
Not a firewall as such.
Hay Andy, I have been watching a few RUclips videos about Wind Power. They explain the benefits of incorporating Wind Power with a Solar system to improve the power availability to your home and/or batteries. Have you thought about adding Wind Power to the Off-Grid Garage?
Thanks, I needed a change from all the BMS BS 😜
Isn't welding galvanized incredibly toxic?
It's incredible fine.
I hope you have done the zinc coating away before welding 😅 Do you want to install a new wall?
6th correct answer. But I had only 5 medals...
@@OffGridGarageAustralia lol..
Think its for a winch to pull heavy stuff up from the floor??
Noooooo!
Partitioning the garage so the air con area is reduced
🏅You got the last medal of 5!
Wow, I am super surprised you were not wearing a respirator, galvanised metal is toxic to weld. I pray there is no long term health repercussions. Long live Andy.
Swing?? Thanks for this video. ps your back will thank you.
Danke fur dieses video. ps Ihr Rücken wird es Ihnen danken
A swing... great guess!
same weight, either rolled up or down 😂😂
But the weight is distributed differently since instead of being inboard it is flush with the outside wall..
A new dividing wall to have 2 sections in your garage.
How to short wiring cell connection JBD AP24S001 24S to 19S. Sir pls reply me
Some grinding and paint, makes me the welder I ain't!
What are you actually trying to do?
Why do you want to put that tiny little pipe along the ridge beam? I guess for unloading batteries from the ute with a roller winch.
But I wouldn't lift >100kgs on it. The strength or any cross beam is only as much as its end supports, and given that your roof and ridge and rafter truss structure has NO VERTICAL SUPPORTS at its ends or in the middle, over time your roof will slump if you lift too much. Those sheds are designed to support ONLY the aluminium roof sheets, not even the solar panels you already have up there. So be careful not to overload it.
A simple test would be to make a measuring stick from floor to roof ridge and see what slump it has when you lift various loads.
Its to hold up your new insulation 😕😕😕😕😕
nope.
the new rails are needed for the new port or harbour you might not have heard about: Andy's OGG port for batteries.
Wait till the first ocean going container ships will arrive from the famous and german deep water container port Wilhelmshaven - emperor Wilhelms haven for the german fleet and now a more or less barely used containter terminal harbour.
Wilhemshaven to OGG port - but what cells should we ship ?
Of cause the german made CATL cells .
Good luck for the further welding adventures on this channel. I like these challenges and struggles.
Making a computer / battery air conditioned room .... 6yh corrects answer
Correct, but like 12th or so...😋
Andy you're going to turn your batteries into a cool room
🏅
His been talking aircon for some time.....
Gyprock off half you garage for a safe place, and new studio to experiment with all types of batteries?
So much stored Ah in the garage. And no motorizied rollerdoors. I´m a little disappointed, my dear Andy
Ya it's so if your head gets elephantiasis like mine and blows up bigger than a beach ball you'll have a reference beam.
You are building a dedicated mancave, so your cooling of the batterys snd inverters is more effective.
my comment for the algorythm. Thank 4 ur Vids!
a grinder and paint make me the welder I ain't
Is it for a remote control camera dolly setup? You're going Hollywood style you dog!! Maybe a crane too... 😂
Fantastic idea! I would love to have one!
How many times did I tell you that you have to wear helmets on the construction area 😂
Hi, hab da ein Problem und brauche Rat vom Fachmann. Hab eine Batterie bei der 2 Zellen nicht ballancen aber einen Drifft von über 200mA dadurch. Hab mal das Ballancing auf 3,35 herunter gesetzt wo die beiden Zellen stehen bleiben aber es tut sich trotzdem nichts.
ac mini split
Building a wall
Yes.
I'm curious how did you power the welder? Was it powered from the MultiPlus? Did it handle the load? Did it start the Phoenix "generator"?
Of course the MP can handle the load! My solderer consumes max 300W!
If it's stick indid it mean that you need to increase the current.
A winch on rollers, a type of elevator or lift for batteries?
Beam me up, Andy!
😀 Plus que 2 vidéos à regarder et je suis de nouveau à jour ! 😉🤞
I'm not sure it would be strong enough for a winch. Maybe for new roof phonic and heat insulation?
It's not a winch...
kran
😁
Nein
5:45 Yeah I like having one too. I suck with levels.
It is so much easier. Can't believe I did without one for so long.
A wall for isolating the batteries and invertors from the high Aus temps?
Yes, correct. And a bit more...
Moin Andy, maybe a cage for Andy II ?
25 ton overhead crane with wireless remote control 😂❤
and Home Assistant integration...
But nope...
Hi Andy, I have seen worse welds done by time served welders. Top tip keep your rods bone dry, high humidity and moisture causes tons of problems, cook them in the oven for a few hours before welding if you can't keep them BONE dry.
My guess is a smaller climate controlled fire proof battery room.
Luv ya
Gaz
Or an old fridge “not operational” with a 40 watt old style globe inside just enough heat
Thanks Gaz. You're spot on!
I might be a traverse crane preparing. 😂
Bat cave
A grinder and paint makes you the welder you ain't....lol
Hahaha, great, love it!
Installing a lift for moving your batteries around??
I already have a lift as you have seen in the video. So, no.
lol, I had my dealing with welding upside down ( at 4.5meter height ) .
I still have a nice 'round spot' on my right arm musle. lol .
When the WAY TO LARGE blob of red hot molten metal fell on my arm, I felt nothing at all. The pain came 1 day later, haha.
Good times :)
I have the same welder (GMC brand). Bought it about 26 years ago from Bunnings and installed a 240 v ac computer fan in it due to the overheating issues like yours. Still going strong today.
Hi Andy,
I am concerned for your health the way you are doing your welding! You need to always wear long sleeve clothing, and protect your neck from the intense and damaging UV that is generated by the welding arc!
I imagine you had a pretty bad "sunburn" from the welding you did on your arms and neck. This is a major cause of skin cancer for those who weld without the proper protection. It's no joke.
Also, welding galvanized materials produces toxic fumes that require a respirator that is intended to protect you from those fumes.
Please take better care of your health when welding, and be a good example to your subscribers....
Cheers from Oregon, USA,
Philip
Wow, No undercut , Great floe, Penetration looks perfect. Great job for position # 1. 60 series my guess.
Hallo, wo ist Andy 2 wenn man ihn einmal zum Gegenhalten braucht? Solche Sicherheitsschuhe muss ich mir noch zulegen!
He extended his holiday from what I heard.
Could it be the Off - Grid battery swap station ?
Very close!
Only 6 ants outside?
I have a suggestion that may help with your welder situation where it overheats. If you install a 12v power supply that connects directly to the power lead it won't shut off when the welder get's too hot. I'd attach it right onto the output of the power switch and neutral. That way it turns off when you hit the mai9n switch.
Heya, oh your just as good in welding as I'm lol
Hoist for more power.....
Portalkran :-)
Naaaaah!
It’s going to be the top of a new powerwall (v3 tm)
Powerwall 3.0! I like that.
Ein Flaschenzug ? Or some Motorlifter stuff ?
Nein, nein, nein!
Are building a mini crane for lifting batteries?
Or just a floor for storing stuff obove?
You have solar panels, they make great DC welders.
Not when it rains! And I need around 100A
@@OffGridGarageAustralia
LFP make even greater welders...⚡
YT channel MRMining made a Video trying to weld with a 16S Battery.
It worked!
My guess: you put a curtain to hide your batteries 😅
Hahaha, great idea!
Laser levels are better than sliced bread. Get the floor to ceiling pole you can mount it on.
running electric lines
suport for a wall?
pour un palan roulant
Cable gutter for on-grid garage
😋
Eine Trennwand um den Speicher im Sommer besser kühlen zu können!
🏅
Thanks Andy, (89.7k at 5:21am) 👍
Thanks, Wayne. Oh, wow, I haven't checked for a while...
@@OffGridGarageAustralia Onward and upward to 100K. I think you get a plaque for that and a lot of kudos. André
😎
Andy is building enclosed conditioned space or a room for batteries
Yes, with a bed!
😂
Insulation
A dividing wall to have 2 sections in the garage. 😊
🐸🐸🐸😊
2nd place goes to Berlin🥈
Moin 👍👍👌
CRANE!
Room divider
Kind of... 🏅
oh my god, he has one of these deathdapters
looks like you're building a new wall.
Yes, correct.
@@OffGridGarageAustralia So you are finally building yourself a prison cell out of heavy steel?? Why not just galvanized steel sheet metal studs for top plate, bottom plate and walls?? Or are you planning on a heavy rollup doorway?? Me I am lazy and would have just put up a curtain rod and a heavy curtain to separate the delivery bay from the work area.. But I suppose Australia's climate is like Florida, hot - muggy and buggy..
You will see... It will be a proper wall.
Luckily, we don't get these muggy days very often but rather have a dry heat which is much easier to cope with.
@@OffGridGarageAustralia Climate control for the Power Room! Perfect solution!
Internal solar panels!
😯
Ευχαριστούμε!
Thanks for your ongoing support! 🙏
gantry crane:)
I already have one.🏗️