Another good way to land the big Ten is to use FS instant approach great stuff but very tricky to keep the nose above the horizon but make sure you only use 10 degrees flaps at FL1500ft until your about one kilometer from the runway of your choice keep speed up to 290 don't go lower or the plane will stall try it fantastic but love this video
Nice video but don't forget once you up in the air to turn off the APU gen normally this is done before you roll down the runway keep up the good video's I like em
Speed from 250 to zero? Only thing I know that does that is when you're icing up. I assume you've checked on this, since it can occur in pretty much any plane, particularly high flyers.
***** Agreed. My only concern is that it might be hard to fly as I do not have that much experience. However, since its an f-series plane, I might be OK
RE: your speed indicator, do you have your pitot heat on? In default planes I used to have my SI drop to zero while flying in cold weather + precip, probably from an iced over pitot tube.
Hey man great video :) I got a question for you...is the KC-10 model included in the models for the P3D version? I know it's in the FS9 version, but don't see it for P3D and wanted to make sure it was there before I spent $40 bucks on it. Thanks
The problem I often see, with these videos, is that the guy doesn't know the first thing about the procedures. My advice is to get a manual, set the servicing up first, and then follow each crewmembers normal preflight procedures. You might also get someone who actually has operated the equipment.
Don't you think you overdoing it a little Ellis. I mean have you flown a real DC10 in life or a pilot like I was for thirty two years. FSX is a simulation not a real time flight deck. There are similarities in the video but it's the best one i have seen yet. Durka is trying to show people how to fly the aircraft and it's instrumentations and features it has. Remember Ellis there is a big difference between real time flying and flight simulations
Do not be fooled with the speed indicator these are not real time for the big Ten. I have found using 2D flight deck images works just remeber the same speed indicators are of that of the 737-800 speed indicators which only allow you top air speed of 325knots. The big ten can go up to 350 knots as does the 747-400 i have know idea why FSX did this
Gavin Wallace other than x-plane doesn't uses simulated laminar flow over surfaces vs lookup tables for flight performance. Not sure in the big tune liners, but the default 172 behaves very close to the real thing in stalls and turn without needing a "study sim" add on product.
Thank u so much for this video ;) finally i know how to do a cold start with this beauty! xx
glad it helped
Thanks so much for this! Really enjoyed watching it and easy to follow!
Another good way to land the big Ten is to use FS instant approach great stuff but very tricky to keep the nose above the horizon but make sure you only use 10 degrees flaps at FL1500ft until your about one kilometer from the runway of your choice keep speed up to 290 don't go lower or the plane will stall try it fantastic but love this video
It takes good practice to fly the big ten's around and there not a aircraft to be played with either in real time
Wow thats cool
I'm wondering how to make it cold and dark when you first get in.
Plz Tell me how to make it cold and dark.
I hope to see more of this !! Subbed !
Yes more of these and starting a classic series soon.
good job to much for one person i love the dc10 as well as the l-1011
Nice video but don't forget once you up in the air to turn off the APU gen normally this is done before you roll down the runway keep up the good video's I like em
wilie Carter many thanks. Yeah I forgot that cheers.
Thanks Durka anytime
Great Video Mate!
+Krister L cheers
Speed from 250 to zero? Only thing I know that does that is when you're icing up. I assume you've checked on this, since it can occur in pretty much any plane, particularly high flyers.
I can't remember what the issue was but this was a bug on the DC10. Need to fly this again.
Yes, it's a bug in the CD-10. Found a fix for it, but that was awhile ago and don't remember how I fixed it.
I am considering buying this plane. I've only flown freeware planes so far, and after the just flight 757, I decided to go and buy this one.
It's a good plane. Something different at least.
***** Agreed. My only concern is that it might be hard to fly as I do not have that much experience. However, since its an f-series plane, I might be OK
+Daniel Dankers watch my video 😉 you will be up and flying in no time.
***** Lol, I am already making notes on how to start it etc.
Good to hear. It's fun
RE: your speed indicator, do you have your pitot heat on? In default planes I used to have my SI drop to zero while flying in cold weather + precip, probably from an iced over pitot tube.
Yes pitot tubes where on. I've not flown this for a while. I need to take it out again and double check that. Thanks
Hey man great video :) I got a question for you...is the KC-10 model included in the models for the P3D version? I know it's in the FS9 version, but don't see it for P3D and wanted to make sure it was there before I spent $40 bucks on it. Thanks
Hey it’s not included. Sorry for being a bit late
How did you got that EZCA Free roam in VC camera? I mean. You can fly around with the camera in the cockpit...
Im using Ezdok.
I know you're using it but I'm not able to move around... Are you using a custom made camera view?
could be fun if u use the radio and talk with the tower .... just an idea :) love ur video again
Hello, many thanks. I'm back on Vatsim and Ivao again so yes some of my videos will be talking to ATC.
awesome . btw you go a new fan !! :)
+Yves Grenier thanks again.
What is your settings for EZ dok?
The problem I often see, with these videos, is that the guy doesn't know the first thing about the procedures. My advice is to get a manual, set the servicing up first, and then follow each crewmembers normal preflight procedures. You might also get someone who actually has operated the equipment.
Ellis Chernoff but you fly it yourself.
Don't you think you overdoing it a little Ellis. I mean have you flown a real DC10 in life or a pilot like I was for thirty two years. FSX is a simulation not a real time flight deck. There are similarities in the video but it's the best one i have seen yet. Durka is trying to show people how to fly the aircraft and it's instrumentations and features it has. Remember Ellis there is a big difference between real time flying and flight simulations
@@wiliecarter954 I have 5000 hours flying the DC-10.
Is this compatible with p3d v4?
Not sure why it not at 1080? Hopefully that will get sorted!
+Brenden “durka” Quinn Its 1080p now :P RUclips takes a while to process HD videos. (I'm Simmer514 btw :P)
+John514 Hello mate. Ok good. Yes sometimes it take a while sometimes it's straight away.
Bro, can you share the FedEx repaint? ;)
Can't remember where I got it sorry. Google is your friend I'm afriad..
Durka Gaming I already searched in a lot of websites but I didn't success including avsim, flightsim, etc. But thanks bro Regards ;)
Let me see if I can find it mate.
How did you get the flightplan in the fmc?
Ellmer through Avilasoft EFB is there not a link below
oh ok a Thanks! :)
Ellmer if you have the software make sure you click the option where it updates the plan
ok
and how do i export the flightplan into the fmc
how do you get it to install onto my windows 10. I have the cd and it Wil never install.
download it from your just flight account
How did you get it to work in p3d can't get mine to work in it
+Robin Lambert There are v3 installers
Do not be fooled with the speed indicator these are not real time for the big Ten. I have found using 2D flight deck images works just remeber the same speed indicators are of that of the 737-800 speed indicators which only allow you top air speed of 325knots. The big ten can go up to 350 knots as does the 747-400 i have know idea why FSX did this
how did you load the flight plan?
You add it manually
@@durkadirka I tried to use the fms, but the alphabet keys of fms do not work how much ever I try. Is there a fix for this issue?
hey mate 'how can i get this realisme
+Mouloud MOULOUDI ABDERRAOUF watch my settings video on p3dv3
What game is this
golden plays its not a game. It's flight simulation.
it completely depends on what add ons you have.
Literally the only thing better in stock x plane is scenery. And no one uses stock scenery or aircraft so why would it matter what sim you have?
Gavin Wallace other than x-plane doesn't uses simulated laminar flow over surfaces vs lookup tables for flight performance. Not sure in the big tune liners, but the default 172 behaves very close to the real thing in stalls and turn without needing a "study sim" add on product.
@@UlrikBrun-ir7mh its a good flight sim for beginners
10000th viewer Durka :D
Maurits Veen sweet, nice one