TIIIIITE!!!!! Im turn my shadow into a bobber. I've watched tons of videos. But your one video offered so much info. Im all about stealth clean odd. And u nailed it. THANKS BRUH!!!! I BEEN TRYING TO FIGURE OUT HOE TO LOWER THE FRONT AND GET MY CLIP ON BAR HIGHER AT THE SAME TIME. AND U TO HAVE DONE BOTH!!!!
Nice looking bike! Can you tell where you got the custom parts because I have a problem finding CLIP ONS and good blinkers. Also how did you move the clip ons over? Also do you know what paint I can use to paint the rims and forks?
You can find the clip-ons on eBay but look them up under Harley-Davidson so you get the 1-in bars. You can also find the blinkers on there as well as for the paint I use a high heat paint and heat treat each coat. I start with Matt Black to high gloss black then clear coat
This came at the perfect time. Im considering those same blinkers you used on the front. Which ones did you settle on and how did you find the build quality?
Another Sweet Build! Do you think one day you can make a video on how you shorten the forks to hold the Clip on cafe bars up top? Got My VLX 600 and so far all I want to change is the Bars & Grips
Powder coat is the best but pricey. So I use a high heat and treated with a heat gun to harden it then I use a epoxy paint and clear-coated all. I haven't had any issues with any of the bikes.
So first of allthe speedometer I bought was for the vlx 600. If you have that one all you need is one power wire one ground wire and the wire for the oil light. That's it then you connect your Speedo cable.
Hey brother I have cafe bars like that but I want to know how you mounted them to the top of the triple tree ive been struggling to figure it out cuz I don’t wanna mount them to the forks help!😫
Maestros Customs Gregory Garay so I don’t have to take the triple tree bolts completely off or do I just loosen them then lower the forks and take the bolts off, then mount the bars on?
@@derricktyroneward247 you just got to loosen up the Allen bolts on the sides where the forks go. If you do one side at a time that fork will slide up.
The blinker wires are on the left side of the bike and the power wire is gray and I believe the left blinker wire is solid blue and the right blinker wire is solid Orange. Connect those to a switch and you will have blinkers
Maestros Customs Gregory Garay damn bro it looks pretty cool man it looks like it has a bad ass grill in front that looks like the old school scorpion and sub Zero mask .. you have my number bro if you still have it shoot me over some pictures of it and maybe I can find out please
@@MrgLoRybLue hey what's up. I looked up how much it would cost to New Zealand and it looks like anywhere from $1,300 to $1,500. If you're serious and I think it would be cool to have one of my bikes sent out there I would do the vlx on the video for $3, 000. They go for 3500. So 4500 with shipping. Clean title, Registered and running great!
This setup, the indicators and bars, look super clean
Thank you bro!
Did you ever make a video showing the install of the speedometer by chance...?
Just bought a 94 Honda vlx 600 bobber you videos are giving me some great ideas for some upgrades!!!!
Got links for the speedo and the turn signals bro ? It’s a very nice build I just bought mine today
Another amazing bobber. You are the master. Thanks for sharing.
Thanks bro
dude said "alot more safer" and i'm just sold, that's like the safest you can get.
LOL jay kay, sweet looking ride! Can't wait to build my shadow.
lookin so awesome! what route did you go towards blacking out your triple tree?
Sweet build. Ant Man does excellent paint!
TIIIIITE!!!!! Im turn my shadow into a bobber. I've watched tons of videos. But your one video offered so much info. Im all about stealth clean odd. And u nailed it. THANKS BRUH!!!! I BEEN TRYING TO FIGURE OUT HOE TO LOWER THE FRONT AND GET MY CLIP ON BAR HIGHER AT THE SAME TIME. AND U TO HAVE DONE BOTH!!!!
Thanks bro.
Nice looking bike! Can you tell where you got the custom parts because I have a problem finding CLIP ONS and good blinkers. Also how did you move the clip ons over? Also do you know what paint I can use to paint the rims and forks?
You can find the clip-ons on eBay but look them up under Harley-Davidson so you get the 1-in bars. You can also find the blinkers on there as well as for the paint I use a high heat paint and heat treat each coat. I start with Matt Black to high gloss black then clear coat
Hell of a build. making me want to put those bars on mine instead of apes.
Saludos moustro, hermosa tu motor, como le conectaste los rpm al tacómetro 🙌🏻
Love your work and your videos mate! The blinkers, speedometer and bar end mirrors with leds are sick!
What brand is the speedo?
The speedo is an off brand and I'm thinking of trying some different styles. I got it on eBay. Thanks for all the good comments
Another nice ride man!
I wish my back could take sitting on a seat! Looks tan chulo tío!
Hi bro. That is a beautiful bobber great job God bless you brother!
Thank you so much and God bless you and family.
Great job as always!
Also where did u get the gas tank and digital speedometer?
I got the speedo from eBay and that gas tank is the stock tank but painted by my home boy ant man
This came at the perfect time. Im considering those same blinkers you used on the front. Which ones did you settle on and how did you find the build quality?
So I got them off of ebay and the build was pretty easy for the fork blinkers but a bar blinkers I had to heat to fit. But it came out sick! Thanks
Another beautiful masterpiece my brotha!
Thats a masterpiece bro!!! Any tips on how i can get my engine block shinin’ like that? Got any buffing tips?
to clean your engine use a very fine steel wool and that will shine it all up!
Maestros Customs Gregory Garay thanks for the reply bro u got a new sub!!!
Another Sweet Build! Do you think one day you can make a video on how you shorten the forks to hold the Clip on cafe bars up top? Got My VLX 600 and so far all I want to change is the Bars & Grips
Another beauty! Nice job
Killed it brotha💯
Nice,how hard was to install the chinese speedo,I’m thinking to get one myself
Not too hard the wiring is basic but the install is a little tricky. You have to turn the bracket over and then bolt it
I will give it a try
Thanks
Yo maestro are you using powder coat or paint.. nice bike!
Powder coat is the best but pricey. So I use a high heat and treated with a heat gun to harden it then I use a epoxy paint and clear-coated all. I haven't had any issues with any of the bikes.
How did you wire the digital speedometer, im trying to install one on my bobber now but idk what wires too connect together ?
So first of allthe speedometer I bought was for the vlx 600. If you have that one all you need is one power wire one ground wire and the wire for the oil light. That's it then you connect your Speedo cable.
Yeah Buddy your the MAN!!!
Nice bro I have the same bike but 2004 complete stock and want to make it a bobber
Niice!!! I just bought my own. Where can I find those handlebars and guage?🥵
You can find them on eBay
@@maestroscustomsgregorygara7624 Thanks a bunch!!!! No what about those wheels? Beautiful!!
Do you make the seat pan yourself? I'm thinking about doing it for mine! Since my air intake is under the seat in the stock position.
I make the cover under the seat myself
Maestros Customs Gregory Garay dope that really work man! It’s small details like that that make all the difference
Where are you located at? serious buyer/build at your hands. Id like to get in touch.
I'm in Hemet CA
Beautifully done 👍👍👍 did you use the stock exhaust?
Yes I chopped and added tips and it sounds tight, right?
Maestros Customs Gregory Garay 🙏🙏 hell yeah 🙌
Another great job brother! Where did u get the exhaust tips? Did u make them or ordered it? Thanks in advance
@@jomelsanarez4800 tips from Auto zone
How hard is it to convert to a digital speedo? That is a sick looking bike!
It's not hard at all. Wire up your power and ground then your oil pressure wire. Hook up you speedo cable and you good
Maestros Customs Gregory Garay do you have the link to that speedo?
@@kawi724_eric www.ebay.com/itm/114187969589
Maestros Customs Gregory Garay thank you! I’m gonna give it a shot!
What is the kind of speedo? I need one for a shadow aero 1100 2001 do you know what I need?
The aero is an electric Speedo not cable.
Where do we get the speedo from
Hey brother I have cafe bars like that but I want to know how you mounted them to the top of the triple tree ive been struggling to figure it out cuz I don’t wanna mount them to the forks help!😫
Loosen the triple trees and lower the front end and the forks will be higher. Then you can mount to the forks
Maestros Customs Gregory Garay so I don’t have to take the triple tree bolts completely off or do I just loosen them then lower the forks and take the bolts off, then mount the bars on?
@@derricktyroneward247 you just got to loosen up the Allen bolts on the sides where the forks go. If you do one side at a time that fork will slide up.
Sick ass bikes bro!! 🔥🔥
what exhaust tips did you use ?
What is the size of rear tire?
It's the stock rim and tire
@@maestroscustomsgregorygara7624 so it must be lowered, because tire looks so big! Love all your projects btw
How did you wire the blinker switch?
The blinker wires are on the left side of the bike and the power wire is gray and I believe the left blinker wire is solid blue and the right blinker wire is solid Orange. Connect those to a switch and you will have blinkers
@@maestroscustomsgregorygara7624 hell yeah.. thanks brother. And your bikes are sikk.
Hey brother nice ass bike as always man ... by the way what kind of helmet was that
That helmet was a gift
Maestros Customs Gregory Garay damn.. so you don’t know the name or style and make???
@@039kings no bro it doesn't have any names on it
Maestros Customs Gregory Garay damn bro it looks pretty cool man it looks like it has a bad ass grill in front that looks like the old school scorpion and sub Zero mask .. you have my number bro if you still have it shoot me over some pictures of it and maybe I can find out please
How much do u sell your bikes bro
3500
How much a bike like that cost.
3600
@@maestroscustomsgregorygara7624 been watching your video bro some dope Bobbers🤙. Ill be hit you up when im ready for sure.👍
Hey man you do a mad job at making these bikes. Would you be able to ship overseas?
Thanks bro. Where over seas? I can find out the cost and give you a deal on the price of the bike.
@@maestroscustomsgregorygara7624 New Zealand
@@MrgLoRybLue hey what's up. I looked up how much it would cost to New Zealand and it looks like anywhere from $1,300 to $1,500. If you're serious and I think it would be cool to have one of my bikes sent out there I would do the vlx on the video for $3, 000. They go for 3500. So 4500 with shipping. Clean title, Registered and running great!