Amazon Handmade, Q4 Tips, New Prints - 3D Print Vlog #22
HTML-код
- Опубликовано: 5 фев 2025
- Ready to transform your 3D printing passion into profits? Join our exclusive Skool community. I have sold over $2 million with 3D printing and in this community, I will share with you exactly how I do it! Learn insider strategies, gain expert tips, and connect with fellow innovators. Don’t just print-profit. Join us today and turn your 3D dreams into reality!
👉 Come join the 3D Print Academy - www.skool.com/...
In this video, I go over some tips to get ready for the Q4 season as well as showing off some new things I'm printing. Also, I applied to Amazon handmade and after a few days and some bak and forth emails, I got approved. Hope to show you guys how the platform is and how it compares to Etsy.
**Glowing Seoul Skincare**
👉 Get Your Korean Skin Care Products Here - glowingseoulsk...
👉 Use Code Dancyn 15 for 15% OFF!!!
**FlexiSpot**
👉 FlexiSpot is having their anniversary sale now and a chance to win free orders!
🌟 Use my code ''24AUGE7PLUS” for extra $50 off on E7 PLUS! Trust me, it's a rare treat!
👉 FlexiSpot E7 Plus Standing Desk: bit.ly/3Aq3Mxv
👉 FlexiSpot C7 Ergonomic Chair: bit.ly/3M80YI8
Follow Me!!!
👉 Instagram: / dancyn3dprints
👉 TikTok: / dancyn3dprints
👉 Etsy: www.etsy.com/s...
👉 Website: www.dancyn3dpr...
**LINKS**(When available, we use affiliate links and may earn a commission, at no cost to you!)
👉 Vellgoo 3,200 sq ft Dehumidifier - amzn.to/4dfVuH9
👉 iPower 20.6 X 20.8 Inch Shutter Exhaust Fan - amzn.to/3SJSevx
👉 Air Quality Monitor, Indoor Air Quality Monitor - amzn.to/3SLgKfF
👉 Medify MA-40 Air Purifier with True HEPA H13 Filter | 1,793 ft² - amzn.to/4fIZ8La
3D Print Filament Brands I Use:
👉 Elegoo PLA - amzn.to/3WKbxqQ (Amazon)
👉 Grat Kit - Dual/Tri Silk PLA - amzn.to/4fjTkI1 (Amazon)
👉 Creality Rainbow PLA - amzn.to/3YpNXRh (Amazon)
👉 Insanmate Rainbow PLA - amzn.to/3M6MpVj (Amazon)
👉 Insanmate Dual/Tri Silk PLA - amzn.to/3ym8EDm (Amazon)
👉 Sunlu PLA (All Colors) - amzn.to/3A2LemS (Amazon) - bit.ly/Sunlu-PLA (Sunlu)
👉 Hatchbox PLA (All Colors) - amzn.to/4fs2n9W (Amazon)
*GEAR I USE*
👉 DJI Osmo Pocket 3, Creator Combo - amzn.to/3SwfwF0 (Amazon)
#3dprinting #3dprinter #3dprint #bambulab #3dprinting #3dprinterfarm #3dprintingmachine #3dprinted #vlog #3dprintvlog #advertising #hormozi #100mleads
Fantastic content & great channel. Timing is perfect about learning AMZ Handmade! I'll look into today as I'm ready to soft launch my own product.
Now I need a boba!
I’ve only just found your channel and I love what you’re doing. I’ve a P1S and only print things now and again for my son. I’d love to sell some prints for extra cash but I feel like the market is already saturated with people selling prints of dragons, eggs etc on Etsy.
Try the bigtreetech cryo build plates. No need for brims super sticky and less bed heating
Suggestion, put a lid with a hole for the tube on the overflow water tank for the dehumidifier otherwise the water will just evaporate into the air again in the warm environment.
Do you have to comply with any certification/safety codes for the products you sell? I’m think asking the lines of products aimed at children having small parts etc /choking hazard
I’m not expert considering I’ve never sold a print, but from what I’ve seen stated elsewhere, this is avoided by not actually listing the items as toys. They are usually called pets, trinkets, fidgets etc.
@@seantrainor2552 Still a huge liability selling 3D printed toys, tell that to a jury when a kid dies from chocking on one. 1 accident away from losing everything. I would like to know how the owner is protecting himself from this liability, insurance might not cover because of deceptive marketing.
I was thinking you could heat seal your plastic waste into bags to use as packaging, non clear bags would work
Didn’t know you were in the northeast, I’m assuming USA, Whereabouts? NH is my home state, live in VT now. 😊 love all your content, I play these videos while I do my morning work lol
nj
Q: amazon toys category requires toy certification. How do you address this issue with your amz items:? TY great content just subscribed
Find a way to mount to dehumidifier on the wall above the sink or on a shelf near it. Run drain tube into the sink and gravity will do the rest. You’ll never have to touch it again outside of filter cleaning.
Was thinking of doing that but then the employees can't close the bathroom door lol
Great content! Question for you, what do you use for containers for your prints when you send them to Amazon Fulfillment or others? I've been trying to find good packaging for my 3d printed resin and filament products, but everything kind of lets it move around too much and I'm worried about damage. Thanks!
If I can yes
Pretty sure I already saw this one out like 2 hours ago :think:
You shouldn’t have overwater from the dehumidifier collecting. It will just be going back into the air. That’s why it’s in a close tank within the machine.
LOL
would something like the creality cr30 be useful? for like printing the eggs?
No clue actually never tried
What thermal printer or whatever do you use to print your labels for boxes? Thanks!
Rollo
Put a sump pump in the bin and have it pump the water outside automatically
what are the little bricks in the back for
What bricks?
@@Dancyn3Dprints on the print there is like a tower of filament!
Do you having any problems shipping PLA prints during the summer?
Nope
Where do you get your files from
Online websites, patreon, etc
Friend, which printer brand do you recommend besides bambu, I wanna start a business as well but bambu doesn't ship to here and the reseller upcharge twice the asking price and no availability for spare parts
Sovol? Maybe also a creality? Those are my other two favorite trusted brands that I’ve used, I don’t like anycubic, they’re horseshit in the reliability department and quality, uhhh maybe kingroon there relativity cheap and probly available where you’re at as well as biqu I’ve heard good things from them but again I can’t recommend sovol or creality enough if you can’t get a bambu.
Where do you get your trash can files for your trash animals
If on Patreon who’s patreon
USPS is always complaining . They hat3 me at my local office because they have to scan all of my pckgs so i can get a r3ceipt
Eventually these little figurines will go the way of fidget spinners. Gotta keep your eyes open for the next big thing.
That's the beauty of 3d printing. I can switch at any moment
@@Dancyn3Dprints indeed!
Hello,
What's the braces that you have on your A1's?
Do they help and if they do can you point me to where you got them from.
Thanks
They are for the ams lite top mount. You can find them.on bambu labs website or makerworld