Thank you! I cannot express enough Gratitude 🙏 Your donation is uncalled for and truly a blessing. This helps the channel produce more content and make spreading information a priority. Thank you once again and Happy Printing:)
hey i have a dtf like your panda one and my color is off ive cleaned it already like your video shows and no i dont use it often probably had been a week or 2 :(
Have you come across where it starts to pull the PET film but then it stops completely and once you press the manual feed it will attempt to pull through but then it stops? It’s like the print head is not aligned to where it needs to be each time before it starts to print?
The paper seems to be feeding too much to one side and is casuing head knocks on that side. The paper seems to be bunching up under the metal lip it feeds under while printing. Do you have any insight on how to correct this? Thank you.
I would need to see more to better assist you can you kindly send me an email and give me as much information to what you did before you had this problem and what you have tried to do to fix it. Please be as precise as possible and include photos and videos, Thanks !!
glad i found your channel. great advice, and also another fellow Canadian :) once i finally get started ill for sure look into ordering materials from you.
Hello, i need help. I lost my father who bought a procolored printer. But i seem to cant get help from procolored since i dont know the order number and cant find the order information... Please some help . Because they say the can only help me if i got an order number
Hi guys I have a problem with my dtf printer 1390 Epson achi I printed every picture and today when I got new orders it doesn't print yellow anymore no matter what I do it doesn't work the dumpers I remade color is more than enough clean is it nozzel check comes everything but no yellow head cleaning I also did but yellow doesn't come can someone please help me thank you
I’ve covered in a lot of previous videos, however we’d be happy to send you a photo of all of our current settings! If you’re interested , send us an email and we will send you photos of all of our current settings! e-mail - wholesprinting@gmail.com
I just upgraded to one of these. I converted an epson et8550 to dtf to pinch penny's like you said and its alot of head aches which is time consuming. Im excited about it!
@Wholeprinting it's coming along great honestly! At first I wasn't sure about the printer as a red light kept blinking every time I would turn it on. But I found if you kill the printer than turn it back on before using it fixes that issue although I wish I knew how to permanently fix it so I wouldn't have to do that every time. Other than that it's been great! Thanks for your videos brotha!
Hello how likely am i going to have issue with the procolored dtf printer so need a couple of spare print heads And mother board goes too with a bad printhead from what people say on the procolor facebook group Can you actually make any money or do you spend it fixing it again I thought about getting a white toner printer instead
Hello, I’m not sure about the white toner printer since I’ve never used one, I would suggest you calculate everything and outweigh the pros and cons and make you’re own educated decision on what’s best for you!
I just came across your video and would really love some help. I bought the panda L1800 printer about a month ago and it has been working great until it just stopped working yesterday. I have been working on it for 2 days now. It will not print the white. I have cleaned the printhead, but still having issues. Do you have any suggestions?
Sorry to hear that you’re experiencing some issues… DTF Printing can feel very very overwhelming when first starting out… I know how you feel I’m here to help you every step of the way Send me an email and I’ll help you directly 1on1 wholesprinting@gmail.com
I close my printer only before going to bed! However if it has been over 30 minutes nothing has print I do à head cleaning and run a nozzle check to ensure everything is still perfect!
I just purchased the L805 A4 from procolored. Do you leave your printer on all the time or turn it off? I’m a little worried about the heater being on 24/7
We just started working with DTF and yes white is a pain the sack but cleaning periodically prevents a lot of issues. I'm curious, what cleaniinf fluid and DTF ink you use? I've noticed that some ink clogs more than others. GREAT VIDEO, Thanks for the tips 🙂 TOGETHER
I also meant to ask you about the print head. You mentioned about having a spare. I looked in the manual, guide from the manufacturer and couldn't find the print head model. Mine is L1800 :-)
I’ve never used one up to date. I’ve got some coming tho so I’ll be testing out soon I’ll give you feedback once I’ve tried it myself so I can give an honest review!
@@dsignprinting7156 yes I’ve got some extras for sale on my website! They are often out of stock so I like holding some in inventory. You can check out the website I have it for sale. There’s also lots of other companies that can also offer this model at a better price. So do you own research 🙏 But I understand that they can often be out of stock so there’s still a option to get it if ever your in a time rush! Best regards - Dom
Having a problem getting ink to come out of my procolored l1800 . I did head cleans nozzle check. Took out the print head cleaned it did ink guidance. Power ink flush and still nothing .
I would need to see more to better assist you can you kindly send me an email and give me as much information to what you did before you had this problem and what you have tried to do to fix it. Please be as precise as possible and include photos and videos, Thanks !!
@@WHOLEPRINTING yeah I seen that 😂 I ordered one from procolored but doesn’t have there label on it but works great! Your videos our my go to when I in-counter a problem 😁
I purchased a ACHI DTF printer, I can’t get the self to respond to me I’m seeking help on instruction and setting up. I was sent a usb with instructions it will not open on my HP! I f you can help me out
On the panda printer... my paper light comes on non stop and I can't get anything printed. How can I fix that? I feel like I've watched/tried everything
Can i ask you if this is good to have a 2nd set of refillable cartriges fulled of cleaning fluid, and in case of not use for days, to fully flush the printhead and fill in with cleaning fluid by doing some "cleaning job" with the printhead ?
Yes!! I agree. I love the content and very thankful for the knowledge being shared here, but I seriously feel motion sickness from all the moving back and forth. I tried to stare somewhere else while listening, but I know there is value in the video/visuals being shown so I still try to watch but I just can't anymore. 🤢
This is the worst in vestment EVER!!!!! Paid almost 5k in April to find out the print head was refurbished and stopped working just at the end of June. I’ve been trying to get them to help with a replacement and they refuse. The warranty covers ZERO!!!!! A new print head is 2 THOUSAND dollars- your better off buying your prints than investing in this junk box! Such a joke! April and her staff will not provide any kind of warranty and you will be out of money! Such a horrible mistake and I wish I never saw videos like this encouraging their products because it’s such a financial loss! Horrible horrible experience with Pro Colored!!! Do not buy these printers! The print heads are as much as the systems and only last a few months as they used refurbished! Total waste for me and my family! :( ☹️💔
It’s really unfortunate that you had that experience I can relate When I got my first DTF printer everything was going bad I did not know how to use the machine properly and my print head clogged within the first week of getting the printer due to the lack of information online I did not know how to properly care for my printer It caused me many trials and tribulations and even nightmares ahaha…. I now feel like I need to educate everyone who’s interested in DTF about the pros and cons of theses printers so people can have a better ideal of what they are getting themselves into… I’m lucky to have Nice after sales support hence why I suggest buying printers with my links to have acess to that same support! I’m learning everyday and I often go on wild rides!!! After two years I almost quit MANY times but I’m happy I’m still at it!
Thanks for the insights and effort
Thank you! I cannot express enough Gratitude 🙏 Your donation is uncalled for and truly a blessing. This helps the channel produce more content and make spreading information a priority. Thank you once again and Happy Printing:)
hey i have a dtf like your panda one and my color is off ive cleaned it already like your video shows and no i dont use it often probably had been a week or 2 :(
That’s the worst
Print heads can clog easily that way
Make sure to do your maintenance everyday to ensure longevity of equipment!
@@WHOLEPRINTINGwhat kind of maintenance? The syringe cleaning peocess ??
Do I have to use only procolored ink in my procolored f13 l1800? I have some ink that I had left from another printer. Not cheap ink was good ink.
No you don’t need to use procolored ink !
Have you come across where it starts to pull the PET film but then it stops completely and once you press the manual feed it will attempt to pull through but then it stops? It’s like the print head is not aligned to where it needs to be each time before it starts to print?
Yes that issued already happened to me, are you still experiencing issues?
@@WHOLEPRINTINGyes! I can’t seem to get it to pull through for a test print, manual feed, or a regular print.
Well you're not buying the best ink the best paper and all the stuff he said in the video
The paper seems to be feeding too much to one side and is casuing head knocks on that side. The paper seems to be bunching up under the metal lip it feeds under while printing. Do you have any insight on how to correct this? Thank you.
I would need to see more to better assist you can you kindly send me an email and give me as much information to what you did before you had this problem and what you have tried to do to fix it. Please be as precise as possible and include photos and videos,
Thanks !!
Hello I can use the epson l805 print head on to the procolored l805 right ? It won’t affect it? It fitted perfectly and all is the same.
Hello im not sure what you mean?
glad i found your channel. great advice, and also another fellow Canadian :) once i finally get started ill for sure look into ordering materials from you.
Thanks for your kind words!
Happy Printing 😁🇨🇦
Hi. My prints have black ink smearing on them and now the white ink is scraping off. Can you help me. Love the info you provide.
Thanks! Sure email us - wholesprinting@gmail.com
Hello, i need help. I lost my father who bought a procolored printer. But i seem to cant get help from procolored since i dont know the order number and cant find the order information... Please some help . Because they say the can only help me if i got an order number
Send us an email - wholesprinting@gmail.com
Hi guys I have a problem with my dtf printer 1390 Epson achi I printed every picture and today when I got new orders it doesn't print yellow anymore no matter what I do it doesn't work the dumpers I remade color is more than enough clean is it nozzel check comes everything but no yellow head cleaning I also did but yellow doesn't come can someone please help me thank you
my printer power light want become steady. do you have suggestion only had 2 days only printd one image
Can you please elaborate on this issue?
Where did you buy your procolored dtf printer?
Links in desc. :)
can you show your settings on the software
I’ve covered in a lot of previous videos, however we’d be happy to send you a photo of all of our current settings!
If you’re interested , send us an email and we will send you photos of all of our current settings!
e-mail - wholesprinting@gmail.com
I just upgraded to one of these. I converted an epson et8550 to dtf to pinch penny's like you said and its alot of head aches which is time consuming. Im excited about it!
Yes it is but it’s worth it in my opinion
You need to embrace the process!!
Hows your journey developing?
@Wholeprinting it's coming along great honestly! At first I wasn't sure about the printer as a red light kept blinking every time I would turn it on. But I found if you kill the printer than turn it back on before using it fixes that issue although I wish I knew how to permanently fix it so I wouldn't have to do that every time. Other than that it's been great! Thanks for your videos brotha!
the tear drop button on my printer is solid red, is that because I have not added ink yet? I just started setting it up today
I’m not sure
Hello how likely am i going to have issue with the procolored dtf printer so need a couple of spare print heads
And mother board goes too with a bad printhead from what people say on the procolor facebook group
Can you actually make any money or do you spend it fixing it again
I thought about getting a white toner printer instead
Hello,
I’m not sure about the white toner printer since I’ve never used one, I would suggest you calculate everything and outweigh the pros and cons and make you’re own educated decision on what’s best for you!
I just came across your video and would really love some help. I bought the panda L1800 printer about a month ago and it has been working great until it just stopped working yesterday. I have been working on it for 2 days now. It will not print the white. I have cleaned the printhead, but still having issues. Do you have any suggestions?
Sorry to hear that you’re experiencing some issues…
DTF Printing can feel very very overwhelming when first starting out… I know how you feel
I’m here to help you every step of the way
Send me an email and I’ll help you directly 1on1
wholesprinting@gmail.com
do a super flush or pull the ink through all the lines/dampers and waste tank line with a syringe 10ml
@@Geekedatbirthapparelthanks for actually answering the question!
Sir, did you experience the printer the 2 lights blinking the ink sign and paper..what did you do?
Email us -wholesprinting@gmail.com
Hi my friend. I have a question Do you keep your dtf on or off after you finish your prints? Thanks
I close my printer only before going to bed! However if it has been over 30 minutes nothing has print I do à head cleaning and run a nozzle check to ensure everything is still perfect!
I just purchased the L805 A4 from procolored. Do you leave your printer on all the time or turn it off? I’m a little worried about the heater being on 24/7
I turn them off before going to bed and I do a maintenance everyday to ensure longevity of print head
@@WHOLEPRINTING thank you.
@@MrBenButtons God Bless & Happy Printing
@@WHOLEPRINTINGgreat video, but what kind of maintenance do you do daily? The syringe cleaning maintenance?
@@ravenfwz218 yes exactly!
Hi can I turn off the power on My punehod dtf printer .daily?.
Thanks
Good question!
Yes you can turn off printer when you’re not using it
What ink do you suggest?
Links in desc:)
We just started working with DTF and yes white is a pain the sack but cleaning periodically prevents a lot of issues. I'm curious, what cleaniinf fluid and DTF ink you use? I've noticed that some ink clogs more than others. GREAT VIDEO, Thanks for the tips 🙂 TOGETHER
I also meant to ask you about the print head. You mentioned about having a spare. I looked in the manual, guide from the manufacturer and couldn't find the print head model. Mine is L1800 :-)
I’ve never used one up to date. I’ve got some coming tho so I’ll be testing out soon I’ll give you feedback once I’ve tried it myself so I can give an honest review!
@@dsignprinting7156 yes I’ve got some extras for sale on my website! They are often out of stock so I like holding some in inventory. You can check out the website I have it for sale. There’s also lots of other companies that can also offer this model at a better price. So do you own research 🙏 But I understand that they can often be out of stock so there’s still a option to get it if ever your in a time rush! Best regards - Dom
How often do you clean using the syringe???
I need help bad bro I have a procolored a4 dtf printer I need to repair can u please help me
Hello sorry to hear your experiencing issues, is everything okay now?
Having a problem getting ink to come out of my procolored l1800 . I did head cleans nozzle check. Took out the print head cleaned it did ink guidance. Power ink flush and still nothing .
Email us
wholesprinting@gmail.com
Do you ship to the UK?
Yup!
I need help with my l1800
Hello are you still in need of assistance?
could a printhead malfunction could make my white ink tuns out gray on my prints?
I would need to see more to better assist you can you kindly send me an email and give me as much information to what you did before you had this problem and what you have tried to do to fix it. Please be as precise as possible and include photos and videos,
Thanks !!
@@WHOLEPRINTING I just saw you monthly membership thing, do you offer one on one video call and or assistant if I sign up? How does it works?
@@JuanCastro-dx1jk send me an email and we will hop on a phone call and I will explain everything!
Is the brand for your new printer by procolored or punehood?
IDK i just know it works well lmao (they are always changing so I really don't know...)
@@WHOLEPRINTING yeah I seen that 😂 I ordered one from procolored but doesn’t have there label on it but works great! Your videos our my go to when I in-counter a problem 😁
@@Jojo_joannna really happy to hear that! Thanks Joanna
I purchased a ACHI DTF printer, I can’t get the self to respond to me I’m seeking help on instruction and setting up. I was sent a usb with instructions it will not open on my HP! I f you can help me out
Email us - wholesprinting@gmail.com
I sent you an email
HOw to NEVER have an issue with DTF printing? Yeah, it's called not getting into DTF. lololol.
Normal 100% cest bon , ou meme 70%!
On the panda printer... my paper light comes on non stop and I can't get anything printed. How can I fix that? I feel like I've watched/tried everything
I was having this, I had to manually roll the paper roller until it was at starting position.
Email us - wholesprinting@gmail.com
That can be it... but probably not...
Where you got the printer from???? I was about to order one from alibaba untill I saw ur video
Help please!!!!?!???!!!!
Did you get a printer?
What can we do if we are going to be gone a week or so to prevent clogging?
GOOD Question! Video coming soon :)
Hi, do you have any news about this please ? Thanks
Thank you, looks like you have alot of tees, stocked up, mind sharing how you source for those tee?
Wordans.ca
Thank you, for sharing!
Thank you for watching 😄
Phsyco Cybernetics! Great book
Oh yes!
Got it from an Amazing Friend
Hello Dom, did you purchase those 🐼 panda printers on Aliexpress?
Hello! No I bought them all on Amazon
Does the printhead cause the left side of the printer to shut down where nothing is working at anymore
what do you mean by this?
Have you ever had issue where the thermostat screen wont turn on but the printer is on? I'm having 2 flashing red lights at the same time.
Many variables can cause this... Full video on Flashing Lights coming soon :)
where do i buy the print head
wprinting.ca/collections/dtf-inks-direct-to-film-inks/products/replacement-printer-print-head-epson-1390-1400-1410-1430-l1800-1500w
I’ve been banging my head for a week because of my l1800. Starting to feel like I made a wrong decision to upgrade my shop😢😂
Are you still experiencing lots of difficulties?
I’m in the same boat
Great Video
Thanks!
My paper touched the printhead cause it had a fold, so I guess my new printhead just died? It was printing and the paper kinda jumped and touched it😢
If your nozzle check is bad and you’ve been having issues with head cleanings you might have to change your print head:/
@@WHOLEPRINTING procolored Sent me a free new one, it was definitely the printhead
Can i ask you if this is good to have a 2nd set of refillable cartriges fulled of cleaning fluid, and in case of not use for days, to fully flush the printhead and fill in with cleaning fluid by doing some "cleaning job" with the printhead ?
Never done it... but I believe its all good!
What do you think of those panda procolored printers vs other similar models?
What would you get nowadays?
@@urjnlegend hood questions, if I had to redo it again, I’d go with theses (the pandas are perfect for small to medium size businesses)
I like your video, but I am so seasick with all the moving. Sorry 😮
No need to apologize, I respect the feedback
Yes!! I agree. I love the content and very thankful for the knowledge being shared here, but I seriously feel motion sickness from all the moving back and forth. I tried to stare somewhere else while listening, but I know there is value in the video/visuals being shown so I still try to watch but I just can't anymore. 🤢
@@athinawest8749 thanks for the feedback! Appreciate it:)
Yeah I got the same printer you have in back I don't know what is wrong with it not the panda one other one 1390
Most likely the print head?
@@WHOLEPRINTING sounds good I'm gonna buy a new one and new software
Print stopping half way thru print job
This a little scary! I trying to buy my first printer today the 1390
Risks = Rewards :)
I feel like I wasted so much time energy and money! All I’m getting are muddy soup prints
Email us for 1on1 assistance - wholesprinting@gmail.com
don't worry bro, DTF problems make me look like a homeless person too, actually more crazy eyes
LEGIT LOL
This is the worst in vestment EVER!!!!!
Paid almost 5k in April to find out the print head was refurbished and stopped working just at the end of June. I’ve been trying to get them to help with a replacement and they refuse. The warranty covers ZERO!!!!!
A new print head is 2 THOUSAND dollars- your better off buying your prints than investing in this junk box!
Such a joke! April and her staff will not provide any kind of warranty and you will be out of money!
Such a horrible mistake and I wish I never saw videos like this encouraging their products because it’s such a financial loss!
Horrible horrible experience with Pro Colored!!! Do not buy these printers! The print heads are as much as the systems and only last a few months as they used refurbished!
Total waste for me and my family! :( ☹️💔
It’s really unfortunate that you had that experience
I can relate
When I got my first DTF printer everything was going bad
I did not know how to use the machine properly and my print head clogged within the first week of getting the printer due to the lack of information online I did not know how to properly care for my printer
It caused me many trials and tribulations and even nightmares ahaha….
I now feel like I need to educate everyone who’s interested in DTF about the pros and cons of theses printers so people can have a better ideal of what they are getting themselves into…
I’m lucky to have Nice after sales support hence why I suggest buying printers with my links to have acess to that same support!
I’m learning everyday and I often go on wild rides!!!
After two years I almost quit MANY times but I’m happy I’m still at it!
Hey just get a M&R Sportsman 6 head and 8 station you will make your profit!!
In a bigger shop, maybe.
nauseating watching the camera moving back and forth, couldn't get pass 2 minutes into the video.
Thanks so much for the valuable feedback, I will take that into consideration
I have a L1800 printer 🖨 is my primo head the same like yours
Cool stuff Mauricio !