Z-Line Designs Entertainment Center Build (NOT A HOW-TO, DON'T EVEN COMMENT IF YOU DIDN'T READ THAT)
HTML-код
- Опубликовано: 27 апр 2015
- THIS IS NOT A HOW-TO. THIS IS PROBABLY NOT THE VIDEO YOU'RE LOOKING FOR. IF YOU BREAK SOMETHING WHILE TRYING TO FOLLOW ALONG WITH THIS EPICALLY USELESS VIDEO, IT'S ON YOU!!! Enjoy. Cuz I don't care.
04/23/2015
Something new for someplace new.
Music used in this video:
Xerxes - Selected Works : Volume Two - H-Two-O
Cameras used in the making of this video: Canon PowerShot SX230-HS Blue
Want to get to know me more outside of RUclips? Then feel free to visit my site! www.AK49BWL.com/
I just bought this from Wal-Mart and I have to say this is a solid TV Stand. I mounted a Samsung 60" TV with no problem. Probably took an hour'ish or more to assemble it. The manual takes a while to fully understand it and the parts. After all is said and done, the satisfaction is pretty awesome. It was my first time using TV mounts too so I was kinda scared so afterwards I had someone to kinda hold the TV while I stomp and jump around to see if it shakes. Very solid The screws on the back of the bracket doesn't screw into anything I believe but just touches the panel to tighten the bottom a bit. I just have a bit trouble to align it to make it balanced.
I'm late to the post but just wanted to say thanks. Wasn't looking for a how-to vid but a what's-it-look like vid. Bought it about 8 yrs ago and just pulled the sealed box outta my closet last night for the 1st time. To me, instructions looked kinda sketchy and made it to where u mounted the upright panel to the back of the table. My curiosity is satisfied, lol. Thanks again.
If you click the gear icon then click speed, you can lower the speed to .25 which should be slow enough to see what he did during any particular step to get an idea of what to do. It's what I did and it helped immensely to see it being built as I found the instructions a bit confusing in some steps when I put my TV stand together.
Bluezone777 Where can I find the gear icon to lower the speed?
Any chance you have the video in slow motion or can help me ?
I purchased this stand and am stuck on #4 so I searched for some help here. One problem is that the method that you used is different from my instructions which tell you to connect the spine assembly to the shelves first and then to attach the legs. I cannot figure out how to do that. I appear to be having the same problem attaching the legs that other people have had. Any suggestions? Thank you.
Ok so I just bought this from someone off Facebook Market place and he says all the screws are there but he is telling me to use the screws that go into the feet on my tv to screw the holder part on is that correct?
I got a tv stand exactly like this at a garage sale for $30. It was in very good condition just with some dust on it and the best part was it was all put together already 😂
After putting the glass on, I tried to put the second back panel (vertical) on with 6 screws but the screws won't thread. The two on left and one on bottom right is ok but top two on right and middle on left screws just won't catch on! Did I do something wrong or I just got defective parts? Did u have any such issue? Doesn't look like it from the video but just checking.
can you use a diffrent wall mount on this..my bars stick out the top of tv like yours and it just bothers me to death..
Is there any change you can slow the vid down so I can see what you are doing
What is the name of this particular design? The moving company just delivered my household goods and I have to put this back together but I want to make sure I have the right manual.
How long did take to setup taking into account any breaks may have taken?
what holds the top glass up when i got mine it did not have stabilizer bar and i want to know if you had problems it or can i buy them because when i go into the walmart now they have anothre bar on them
you must have those bars or the glass will not stay level, and may even break. The glass is screwed to the rear crossmember and two bars that attach to the side rails.
Hey what kind of tool did u use do you remember?
how is this stand still holding up
How tall is it from the floor to he top shelf?
u used strings to hold the arms?
Man the time lapse and awesome music made this feel like some sort of art movie, just bought this stand and this was a great video on setup, thanks for the upload.
Where to buy it..
I bought one today..Whalen 54" TV stand with a 60" 4K LG TV.will put together tomorrow but did I see that you had extra bolts or screws leftover , or are they spares ?
I like the music it goes great!! with you building the entertainment unit.Thanks for the video,it's fast but I get the idea of the way the unit is to be assembled. Besides I can also read the instructions if I get confused .This was a fast but helpful video...Thanks !
Thank you immensely! I could not have done this without your video!
I have 2 safety screws that are supposed to go in the back somewhere but can't seem to find the spot to put them where they'd do anything. Where did yours go?
Probably under the TV mount bracket to hold the TV onto the rear mount.. There are so many different screws to this thing I can only assume what you're talking about lol
couls you send me pics of the manual?
My question is how to remove the tv from that thing. Im moving out soon and dont know how to remove it.
remove the two thumb-screws from the bottoms of the two brackets that the TV is bolted to. Then pull the bottom of the TV toward yourself, and lift upward.
useless without explaining
It would have helped if you showed the model number or a link to the assembly instructions. This looks like the unit I have and I didn't attach the TV mount, but now want to attach it. I know for time you needed to speed this up, but you could have given more in the description.
can I have the instructions
make a video of the back side when its done
I was having trouble putting together the same tv stand so I was very excited to find this video. A big thank you for putting this one up because it really helped me out.
Josh Smith Really? lol I'm surprised, because I didn't really set it up to be a how-to :D Glad it helped tho!
what happen in minute 3 ?
Would you remember what model this was?
yo how do install step 3 I'm completely lost????
J Cole did u end up getting it
Okay I may sound like an idiot I got the whole stand put together but I can't figure out how to hook the red Hook's on top of the stand so that the TV stays it's tilting off like the TV wants to fall off the stand help me what am I doing with the red hook looking piece
Koi
the red hooks are attached to the back of tv and the whole thing gets placed on the stand...
Hey Brandon I'm putting this together myself rn and I've run into a huge problem... when putting on the struts and supports for top shelf the screw holes seem to be on wrong side... did u encounter this? There ontop of bar #3 n are supposed to be under it...
Flip the bar longways. Right to left, left to right.
Brandon helppppp me 😭 I hanve the same issue
Sean Hinchliff hey Brandon I ran into a problem with the support bars it seems like the screws are to small to fit the hole where they get screwed too can u help
Hi question what is the model of your furniture??
martin flores it's a z line tv stand i have the same one
Hi, I am trying to assemble the same entertainment system myself, but do not have any instructions, nor box. Could you please let me know the model number of the one in the video ? So I could contact Z-Line and get the correct instructions ? Thanks
Z-Line won't help you. I've seen too many comments on here wondering the same thing. I can't find my manual at the moment so I don't know the model, but I'll comment back when I find it.
Do i need to buy a wall mount to attached it?
I have this model. No manual anymore but I think it’s the vitoria edition. The wall mount part should be included
Is the width of the base really 50" like the dimension specs say it is? I won't have a chance to see a display of the stand till this weekend so I just wanna make sure Walmart is showing the package dimensions (it's listed as 40" width on their site) and the actual product dimension is indeed 50". Thanks
The base metal frame is technically only 48.5", the upper glass however is indeed 50".
Yes 50 I just got one check FB buy sell cost me $40 already put together
Can you set mines up for me bro
HUH? where is the instructions
yeah I'm trying to do this and the fact that its a time elapsed video doesn't help. also the fact that i can nearly see what your doing
+Joe Vargas it was not meant to be a how-to.
I just bought this and watch the video I really don't think I can put this thing together someone help me out
Don't let it intimidate you took me a couple hours and a six pack but it's solid I have a 65 inch on it
Why can’t anyone actually show you what to do ? How do you put on the metal holders for the top shelf , mine was taken apart during a move and I can’t figure out how to put them back on
I'd tell you if I hadn't misplaced the assembly instructions. That's what I'm looking for to now use the TV mount. I just sent an email to Z-line Designs and if I get a pdf link, I'll attach it here. Basically you needed the hardware for the metal holders, I just don't know which those were.
I can't see what you connected
It took me a lot longer to put mine together, still this video help a lot !Thank you :)It's on sale now at Walmart, $179.00 + tax.
I need help I can't assembly it
need help! where do you put the glass support strut
+Shanakay Senior use the large flat-blade machine screws to attach each one to the inside of the curved support about halfway up from the middle shelf, and then the back of the support attaches to the upper round bar that goes across the back - and if this bar is reversed, you'll have to take it all apart and turn it around ... Yeah, I did that lol
+AK49BWL can this hold 65 inch LG TV?
+Arbaaz Desai pretty sure it can. Especially as light as TVs are getting these days.
Just bought and assembled mine, everything pretty easy and straight forward. I am a little hesitant about just hanging the bracket on the brace without any real screws or attachment method. You still feel like it holds sturdy enough to swivel without the constant fear of it falling?
+Jimmy Bonner there are two set screws underneath the bracket, sort of easy to miss if you're not looking for them. It's very sturdy once those are tightened up :)
I saw those but they didnt seem to screw into anything after going through the lower part of the red bracket, they just kind of touch the lower arm of the mounting area. Is this just a physics compliment I am not noticing or did they not drill some extra holes I should be looking for?
+Jimmy Bonner I guess the tension of the screws pressing on the bracket is enough to hold it in place.. Idk lol. It worked well enough for mine that I couldn't force it loose without first undoing the screws.
You're fast and I'm really impressed that you built this in less than 6 mins :)
geminidaprince84 buddy this is fast motion lmao
+MikeD20 I know, I was just being dumb and silly. Lol
Excellent; now I see how I'll put it together. Looks like it'll take about an hour?
We are moving into our first house and right now we are using a coffee table as a stand lmao will this hold a 55” for sure do you know? I’m close to buying it but worried lmao
Easily. I just stuck a Vizio E55-F1 on mine two months ago and it's the PERFECT width of the stand itself :D
Yes it can hold a 55.
hello how did you put the first shelf on
Chrislene Fimerlus by Reading the extractions
Any chance you can send me the product model name? I have the same one and took it apart because I needed to move. Been trying to put it back together but don’t have the manual. Video was helpful, but was going to look up the pdf as well.
Whalen Xavier 3-in-1 TV Stand for TVs up to 70", with 3 Display Options for Flat Screens, Black with Silver Accents
What tv size is this ?
+Adnan Janjua mine is a 40, but the center will fit up to 56, maybe even lighter 65s.
Wish you where back driven somewhere, loved your work Vlogs, thanks. Jay.
Very nice about to put mines together right this minute I cant wait. And you made it look so easy. lol :))
Too fast but thanks i need to find other vídeo that can do step by step.
To fast I need step by step video
Did you find one
Thank you soooo much😊 This video helped me tremendously! People complaining can kick rocks. He does not work for Z line, he don't owe you people shit😂😂 Ungrateful asses. He did this w/o stopping once! I had to stop 80,572 times & say "WTF?!" and squint at the directions😂 MY MAN!🙌 THANK YOU😊
I bought mine used with no instructions and put mind together
Is this compatible with the sony xbr55x930e?
Rated up to 65" TVs, a 55 should be easy for it.
I don't which holes I should screw it onto on the back of my TV. Can you help me out?
No explanation bro
It would be easier if you had read the instructions. I don't quite have the manual and I'm not sure which screws go where I have the large size the medium size the smallest size.
I'm glad I'm not the only person that RUclips how to put it together. I got stuck at step 2 with the foot things cuz the bottom bar don't have hole for me to screw it.
Well you're not supposed to screw it. That's a bit kinky imho.
If they don't have the screw holes, then you got a bad set and should return it for a new one. If you're talking about the foot pads that keep the unit off the ground when upright, the holes for those should be in the two side-rails on the bottom, not the bottom crossbar. This thing really isn't that difficult to figure out.
is there part 2? to this video?
Nick Wood possibly :P
When is the next vlog getting uploaded
I bought this exact stand and I'm so pissed how easy you make it 😂😂 my biggest issue was the arms that hold up the top glass! After that the 2nd and 3rd glass just didn't look like they fit in their spots. Took me a good few hours to actually get it done but my God it was worth it. I'm actually about to tackle the mount for the TV now!
Good video! Simple and quick!
What tools did you need to assemble this?
They're provided with the hardware pack, there was an allen wrench, flatblade screwdriver...
Oh nice, thanks for the quick response! Picking one of these up later this morning.
Good job 👊🏾
Thanks!!!! Now I put together in no time!!!!
be nice if you told us how instead of doing it fast forward
Thanks! I needed to see if it could do WITHOUT that Extened TV Stand Part, and I see it can 😁
(Casuse I have a 70" Now and wanted to see if that back part was Necessary, and I see it was just an Extension part.)
It was just an extension part for holding TV's up to 65" - at least in my unit. But, the top glass was not rated for more than 65" or 135 lbs. I believe.
Brandon hey man could you please do a tutorial vid on this? I'm about to buy it but I'm not very good at building stuff lol. You would be a lifesaver! Have a good day :)
I wouldn't mind doing this if it wasn't in use and wouldn't take forever to dismantle and rebuild...
I need help anybody
ty
Why u rushing the video so fast why? What is the purpose ? Can you upload again slowly to play the video ? Please do that . I hope it should be for helping the others to assemble it easy .
frew alato Get the basics first, the rest comes naturally.
Only thing is your never supposed to lay the tv directly on the screen like that
Too funny. Maybe zline should do their own RUclips video to explain how to put together their products?
nice job
I am having issue with medal top bar, if I bolt it to the back panel then I can't get the glass holders to go into the screw part of the top bar because those holes will be on top!
Sounds like you might have that bar backward. Try flipping the bar horizontally (so the left side will be on the right, and vice versa)
Brandon if you turn the bar horizontally like u said it means no holes to screw the metal top bar ( b/c d holes are facing front)
I'm having same issue... the silver top shelf holders are ontop of the bar instead of under... if I flip it then I can't screw in the back part... bad part?
Looks like a nice place...at least when you dirty this place up you won't get in trouble and shut down like you would with TMC when they would inspect your truck! Lol. Hope you were able to get a new job as well!
You need a bigger TV :-) Can you adjust the height of the TV to make it lower down?
Yeah, I think there's like four different heights you can adjust it to. It just won't go any higher than I did mine.
***** Okay. Thanks. I was looking at that stand for someone else, but they don't want the TV to be up too high.
yes
Man how do the silver bars he did that shit sooo fast
I came here for the tv mount instead I got a muffin top good for nothing lmaooo
Maybe explain it instead of fast forwarding
You helped me out a bit. Could have been more helpful if u had just forwarded the times you secured the screws. ..But explain in real time where where the screws go. Thanks! Once u get it. It’s pretty easy just a bit frustrating.
that help me a lot. but a little bit fast was that 👍
Skinny line makes z long top but z is back to front so the skinny line will be on the right
I bought this used already assembled only a year old no scratches for $50 lol
Jasper Villa can a 32 inch fit on here
I bought the same one
its so fast i cant remember anything!
Marita Love this isn't a tutorial lol
Its hot in there
NICE VIDEO. PLEASE THE NAME OF THE MUSIC
In the description
thank you
Kind of curious but seems like you where moving, cause I did not recognized the place. 😁👌
***** You're quite observant :)
Spoiled something? 😁
***** In due time lol. I think it'll be VLog 226.
***** well if you read the descrpition, something new for someplace new
I must have missed it. Are you still a driver for TMC? Or employed doing something else? Cannot seem to find a video anywhere showing a change or why you went to left the truck and left for Alaska. Can you help direct me, or inform me?
Good luck to you, you are a machine behind the wheel for sure.
Mark Bell DD216, VLog202... I'm a machine anywhere I want to be lol. It's part of who I am... Do it well or not at all.
***** I finally found the video explanation of it all..,www.ak49bwl.com/forum/index.php?topic=1757.msg21769#msg21769
Sad, so sad to see what TMC did to a hard working guy like you. I don;t know how you treated your customers, but, certainly treated their products well during transport....Usually when one door slams shut, another opens, so don.t let it get you down. Keep on trucking. I think you were born to be a flat bedder! And what better job recommendation can you get from your dispatcher than what he said.
Happy trails man. You will do well, just keep on trucking.
***** From TMC FM: "Based on the video? I can't say he should stay. However, based on his performance, I do think he should get another chance."
I think they let the wrong guy go. The TMC safety guy is out to lunch.
I would like to bid on your old 92007, though. Looked like a good truck in your videos. Motor good in it?
Mark Bell the motor was great, I think through the last month I was in it, it may have needed the turbos looked at, as one of them seemed a little louder than usual.. But the truck still ran great, never had problems starting it that weren't dead battery related, or dead ECM, but that's been replaced so no worries there lol. It was never reprogrammed with the engine-hours or the total fuel consumption before the replacement, so the mpg data is way off according to the info center in the dash, but I have those numbers floating around in one of these videos I'm sure.. It would average about 6.4-6.6mpg in the summer and 5.8 in the winter, and I rarely idled overnight (8.3% idle time) so that mpg is based mostly around driving. It didn't leak. A/C recently fully replaced.. Last driver didn't smoke, lol
Mark Bell I never showed too many customer interactions iirc but I would always do my best to treat them all as friends :)
would've helped a lot if it was in normal motion cuz this is really fast
IF it was meant to be a how-to it would have how-to in the title.
use the speed controls or download and undo the timelapse, hope that helps
Cameras so far away, can’t even see what ur doing
Yes, this is not 'how to'. This is you on fast forward to music from Tangerine Dream.
Show me where it says it IS a how-to 😅
something magically appears at 2:39
abhishek trivedi dude fr I cant find those fucking holes on the bottom cuz there on the top.
Scope Analogy q a
He is moving too fast.
Like ..show how to put it together in fast forward !?!..with no commentary 🤷🏽♂️🤷🏽♂️🤷🏽♂️
That's what I do.
That's what he did.
A very helpful video that helped me decide to buy this stand. FYI: you can slow down the video by using the setting icon (gear wheel) at the bottom of the video.