Это видео недоступно.
Сожалеем об этом.
WLTOYS 144001 FULL METAL UPGRADE | DISSASEMBLY | WLTOYS 144001 FULL TEARDOWN REVIEW | WHAT'S INSIDE
HTML-код
- Опубликовано: 28 авг 2021
- Wltoys 144001 Set: bit.ly/3CKFICl
Coupon: BG70cf4a
Other RC Car Parts: bit.ly/3xPTmjG
Download Banggood APP to get an extra 10% off: banggood.app.l...
Banggood 15th Anniversary Sale:bit.ly/3ytFNHd
Banggood 15th Anniversary Sale Saving Tips: bit.ly/3sGgtMP
Don't forget to hit the SUBSCRIBE button and the chime button on the right to get notified about the latest videos on my channel
Thank you for visiting my channel
Song I used in the intro of video
Cinematic Epic Trailer Music by Infraction / Atlas - • Epic Emotional Trailer...
© Copyright by HMG CREATIVE ☞ Do not Reup
Email for cooperation: nuziwoang@gmail.com
Plastic arms and ball links are better, just buy spares…less weight, better fit and give some flexibility to prevent more severe damage😊
Yes, this is an instructional video on how to build a paperweight...lol
@@thehomefront1905 he’s right most of the metal parts won’t do you any good depending on what you’re doing with these buggies, only metal parts I really recommend and find are a need would be the front transmission box (maybe the rear too) and then the steering assembly and cups but leave the arms alone
@@thehomefront1905 you don't know sht bro
@@fiercetatsu6782 yes agree
Couldn't agree more, I have done the same with my 124017. Went all metal due to excitement then realised how much of a weight disadvantage was added. I also noticed too much play in metal turnbuckles and steering assembly. The extra weight adds much more stress to motor ESC and drive train and made the car under steer alot.
I bought one of these kits and put it together this exact way. Within 3 minutes of the first run post upgrade, two screws backed out and fell off in a grass field and the pull rods won't stay the correct length. Back to the original parts we go.
I went full metal on a wltoys and it was a mistake. Rods would just break from driving at high speed even without hitting anything. When a crash did happen, pretty much every single metal piece broke or bent. I put it all back to stock. It's better I think. Metal looks cooler but there is a place for it on an RC, and the entire car isn't the place for it. Swing arms? sure. gearing?...depends on the metal quality but sure. Chassis? Depends on what the car is for, racing yes, but for bashing metal probably is not the best. I actually prefer plastic Chassis generally.
You should get carbon chasis
@@jajbear10 that's an idea. Sounds good
Thanks for sharing. Concise and accurate with great camera angles of what you’re doing.
Glad it was helpful!
i did a full metal conversion of the 124007 1/12 scale and the upgraded parts fit super good in this newer version so dont be afraid to order go ahead the arms are thicker less gaps and now come with 2 extra needed bearings for the rear to have 3 in total for each side for clearance so overall perfect upgrade for me.
I do this metal upgrade and its just worthed for me , the problem with them only if you play extreme like you hit anything in front of you, but if you play it well the metal gave more stability, if you can't control your rc dont hit full throttle
yes this is common problem with any faster RC car even profi grade
This is a very handy video as I just bought a 144010.
good luck and have fun
although cool .... it's not rly an upgrade
it's actually making the care more fragile
Why would the pull bar rub the arms and construct the tires from fully turning!?
Hi, I did the same thing but whenever I got my tires fit, it either looses and rolls off, or gets too tight and doesn’t rotate. I thought there was a washer or something.
OMFG I've been struggling with those C clamps for like over a hour. Didnt even think to take the other piece off first. LMAO thank you.
Nice video I was literally wondering if these full metal kits are worth it. I think I'll just do the wheel hubs
Also where did you get that tool mat. It looks really nice
Great informative video. Have you bashed the all metal Wltoys in a skate park? How did it hold up?
Will these parts fit on a helion animus 18mt? They look a lot alike. Helion went out of business and I can't find parts that I need. There are some but not much. I'm hoping someone on here will know.
I loved watching your video, everything organized Everything clean and well explained, count on my support 👍👌😉
Yes, thank guy
Sorry about your COVID lockdown bro 😢 keep your head high I hope the world improves! 🙏
Wish I could get mine back together as easy as that 😢
just follow my video and you can do it, another video show detail in dissasembly, check it.
Keep on looking at the video if I can do it with one hand paralyzed !
And not bull shitting ! had a stroke in 2013
You can do it also !!!!! I assembled this left handed !!!!!
You using it all stock right ? I didn't know this will be still this fast with metal parts. Nice!
yes, only upgrade metal part.
Hi. I loved your video. Can you help me ? I've lost This rod that connects the engine to the wheel, making it spin. How do I buy a new one? What term do I use in the search?
I also lost a clamp that holds the bodywork.
I've got even more metal on mine I did suspension and wheels it's ace innit ❤
Excellent video, excellent work!
But putting lubricating paste on the reels?!?
In plastic?!
It will roll better, and make less noise, but it will create the effect of slipping, and the plastic will lose all its teeth!
Great upgrade
Amazing buggy 😲👌👍
Thanks 👍
Las horquillas serán compatibles para un Tamiya TL-01 B ?
I commented below that have the same problem that Dennis with part 1525, the rear seat wheel. I watched the full video in the link you provide in your reply to Dennis and that part is not dissasembled there. My problem is that I broke it and had to replace it. That part is joined to the arm with a very tight metal bar that I do not know how to take out. I do not know what took can be used for that. If you could give me a clue I would appreciate it. Thanks a lot for the video.
I would also appreciate if you can give me a hint of how to take out the bearings which are very tightly fit to part 1525 without damaging them. Thanks a lot.
I would also appreciate if you can give me a hint of how to take out the bearings which are very tightly fit to part 1525 without damaging them. Thanks a lot.
I fount it. The guy in the link below explains it in minute. 3:30. He is all "learning by doing", quite funny but usefull. Now I just have to find out how to take out the bearing. This is the link: ruclips.net/video/HOkMJ1_M3Ao/видео.html
does anyone else have the problem that der Servosaver doesnt come off like that?
Excelente actualizacion realizada a este WLTOYS 144001, respetos desde Venezuela.💯👍🤜🔥🤛🙏💯💯👍👍👍
THANK YOU 😁😁😁😁
@@HMGCreative 💯👍
Thank you, helps a lot
Why did you keep the plastic drive shaft and gear?
I did a full metal upgrade with a different but very similar set. On the front wheel assembly, I had a major issue with the screws that secure the steering arms. The steering arms extend inside of the body of the wheel, and the screws that keep them in place for the full metal upgrade have a large rounded head. Those screw heads rub against the inside of the wheel when you're driving. You can *almost* see the same issue in this video at around 12:03, behind the "B" of the Banggood logo. I ended up just reinstalling the ball that the plastic arms use and using some pliers to force the ball & the metal arm together. Not great. Did you run into this too?
I didn't have the same problem as yours, but you can try to fix it by grinding the head of the screw a bit, i think it should be fine.
@@HMGCreative was just going to suggest doing either that or sourcing a machined hex top screw of same size. Normally what, 10 bucks or less for a big kit of screws / ect for these things?
can this part be installed on wl144010?
Yep same base.
does it come with tools or not. if it doesnt what size tools do u need thanks
you need 1.5 and 2.0 hex hand screw driver
What is the name of this key to remove the wheel ??
Mình mua sao các mặt đạn không dính cố định dù đã đóng nó vẩn lõng le à bạn
Nó lỏng mà bạn, quan trọng nó ko chạy ra chạy vào là được.
DO the alloy upgrades make the car heavier?
Brother from Pakistan the axle and universal joint are not available ,,i export from china but it is too much price.plz suggest me tips of home-made
It's not easy to made it yourself.
Great vid
Link order ?
my upgrade kit is ordered... juhu
Follow my instructions carefully, good luck.
Which tools, glues and oil do I need to donitnlike you? Watching this is like meditation, as long as nothing is broken. Then it gets a little stressful 😁
I only need super glue and hex driver tools set (1.5mm 2.0mm 2.5mm)
He doesn't mention the grease he's using, but in case you're looking for a recommendation there too, I'm using Lucas Oil Red "N" Tacky Grease #2. It's widely available and from what I've read, it's very commonly used in the RC crowd. I got a 1 pound tub of it on Walmart. Way overkill for maintaining 1 car but there are other things it can be used for
No diff case / tower upgrade 🤔
Why you didn't use the new pinion gear and spur gear..
I mentioned in the video
You should run it for a month and a half and then try this also you didnt show how you got the glued screws loose ain't no way you undone them by hand.
The only part i needed to know how to disassemble wasn't disassembled! I need to replace item 1252 as can be seen in the video at 5:16. That's the part most close to his finger in the top of the screen. Has anybody any idea how to remove this?
check this video
ruclips.net/video/pvg4w4D9HB4/видео.html
@@HMGCreative I have the same problem that Dennis. I watched the full video in the link you provide and 1252 is not dissasembled there. Part 1252 is the rear wheel seat. My problem, and perhaps Dennis is that that pat is joined to the arms with a very tight metal bar that I do not know how to take out. I broke that part and need to repair it if you could give me a clue I would appreciate it. Thans a lot.
I have the same problem. The guy in the link below explains it in minute. 3:30. He is all "learning by doing" and its quite funny but usefull. Now I just have to find out how to take out the bearing without dammaging it. This is the link: ruclips.net/video/HOkMJ1_M3Ao/видео.html
@@naerarbern3932 you can watch this video, more details on dissasembly
ruclips.net/video/pvg4w4D9HB4/видео.html
Hello. Does the 144001 and 124017 have the same gearbox? Thanks.
I dont own 124017 guy.
Yes,I had a bad crash in my 124017 and I snapped part of the front gearbox housing straight of where it attached to the metal plate for the shock towers. Looking for a metal replacement ( I'm surprised he put the plastic ones back on ) they were selling on banggood and aliexpress and they all said they fitted 144001/124016/124017 /124019 etc etc
I ordered it and it fits mine and they were advertised for this as well
Look great .. but the vehicle performance suffers
Can this part for upgrade wltoys124016?
I dont own 124016, so I dont known.
Joli travail
Muito top
Top mano
Legend 🔥🔥
Welcome
nice
សួរស្តី
can i get this thing in amazon or ali?
ali or taobao, banggood ...
Le sospensioni arrivano già con l' olio all'interno?
sì
OwO hé lô rôm việt nam vết lốt ❤️😁
Are you Vietnamese? I'm from ú 😁😁
Veri nice 👍😅
nice as always 😍
Power full
Now it's a monster 🤣🤣🤣
muy mal ni as cambiado la electronica ni el piñon de plastico
are u from vietnam ? i has see the plate of the black car is 47A,... Its from vietnam buon ma thuot and i am from that city too
Không phải Việt Nam bác êi, kaka
@@HMGCreative Buôn ma thuột rõ ràng nha bác
@@karufx3792 bạn ở đường nào đấy.
@@HMGCreative 137/12 Nguyễn Thái Bình
bác chơi xe gì ko
😊
Super
THANK YOU
Bộ kit đó mua bn v bạn
8 trăm mấy chục nghìn đó bạn, thích con này mình bán luôn cho ^_^
@@HMGCreative bao nhiu bạn để coi hợp lý ko mình mua 😆
@@giangpham9204 1tr3, ship bạn chịu, part nhựa upgrade dư ra có đủ, xe y mới 😁😁
Hi
Bạn là người Việt Nam à
uhm bác
👍😊
THANK YOU
عالی
با تشکر ، به کانال من خوش آمدید
تو فارسی بلدی؟
نه من از مترجم گوگل استفاده می کنم 😁😁😁
آها چه هستی داری علان داری با یه ایرانی حرف می زنی
@@r_gamer8762 I reply all comments in my channel, I'm Vietnamese. Welcome to my channel.
Hởm ngày coi mà tưởng người nước ngoài
Người đi ngoài ra nước 🤣🤣🤣
Hi
Hi
Hi
Hi
Hi
Hi
Hi
Hi
Hi
Hi
hi