Wow! you've accomplished in 2 days what I've been trying to do for 6 years. My kit was from some other manufacture and their product is terrible. Your kit is Awesome! and fit together just the way it should, with a lil body work your gonna have a nice-looking ride. Keep them videos coming, cant wait to see the next one.
2gr Fe would sound better just listen to the Lotus evora the emira and Exige V6. They all share the same toyota 2gr fe engine and they sound pretty nice . You just have to tune the exhaust for sound. And the kit for the swap is already available and it won't sound like a 4 banger
Looks like a fun car to own. Every body panel bolts on so body damage is easy to repair on rear fenders. What I love is it is a real widebody kit, and you don't have to cut anything to install it. If you put this much into the body then you need a supercharged V6 like the Lotus Exige 430 Cup.
Paradox you can get some billets from raceline or intro wheels custom made for your car with any size barrels if you want 20x14 i bet they can do it and you will have the fitment you want with no spacer
I wished I had waited for this kit. I bought the Fortune Veilside kit, and a few months later, this design was out. I ended up getting custom Japanese wheel spacers and converted the 4 lug to 5 lug 5x114 and had advan do a custom wide offset for the wheels to fit the wide body. Good looking car good luck with the build.
Bro get Zeus fasteners...for your body panels...if you don't know what they are look them up...they will make life easier ..and makes it look really clean..just trying to help
Get some threaded insert rivets, then you can have actual bolts that thread in like they're supposed to instead of using sheet metal screws. As for the radio, you could get a windshield antenna.
Love the project. Make sure to fabricate brackets to hold up the quarter panels so they dont sag when vechicle moves up & down. Paradox: USE RIVET GUN to mount the panels.
Panel Bond is a 3M adhesive that is very good and very expensive. I believe they have a few different types for bonding different materials....steel, aluminum, fiberglass, etc.
Thats going to look insane wow , cant wait to see it when its done , will really like a body kit like that but add a victorracing wing , bet it will turning heads
Panel bond has to go to steel to the fiberglass. Make sure you put is on where is can squeeze out. You can put random dots on the middle to hold it in spots and then do all the way around the part.
Dang that looks pretty sik, at first it looked terrible because you didnt install the rear end but now looks cool. Will be fire once u wrap and add wheels!
I have the same kit i'm lost on wtf to do with the taillights! please go into detail on the splicing part! AL talks way too fast I don't understand him.
I think your build would look alot better with the Porsche rear axle and the front end Porsche suspension 😉 👍 . But something needs to go across the doors because they look bare .
Where did you buy it… all the websites I’ve gone to look super shady and sone of the currency is not even in dollars… If you could please share the link
Pls do like 13-14inch wide wheels. 3pc us had a lot of super aggressive 18s that would work. Or 19s. Just dont do a super huge spacer and normal size wheels lol. The 20s look hilarious tho. It could actual work. Even 19 front 20 rear.
It's gonna look great! But that's a lot of work to make it look like a Porsche, when nobody pays the slightest bit of attention to actual Porsches on the road😂
Wow dude! I’ve never seen a more ridiculous looking body kit but I guess it will finish up looking fabulous! I think maybe a completely new rear suspension set-up is required for an extra 2 feet of track?
You really should have use Nylok’s nuts, or at least lockwashers. Those nuts will eventually rattle loose . other than that that kit is sick. I hope you have it painted first before you wrap it.
The only thing wrong with it is it now looks like a Porsche 🤔 each to there own I guess we all like different stuff . Panel bond is basically sticking stuff together but I’d advise you to buy good quality adhesive there’s loads to choose from 3M products are good …nice job 👍
The more MR2 Spyders I see in widebody kits the more I think they should of came from the factory that way.
You don't need to drill the spot welds. There are 2 10mm bolts behind the trim inside the car. Peel back the drain bags a little for access
Name of company for body kit
Wow! you've accomplished in 2 days what I've been trying to do for 6 years. My kit was from some other manufacture and their product is terrible. Your kit is Awesome! and fit together just the way it should, with a lil body work your gonna have a nice-looking ride. Keep them videos coming, cant wait to see the next one.
We need an engine swap video. K swap this bad boy
Yupp
Nah, boxer swap gotta fit better
@@bal_723 point is the engine got to go.
2gr Fe would sound better just listen to the Lotus evora the emira and Exige V6. They all share the same toyota 2gr fe engine and they sound pretty nice . You just have to tune the exhaust for sound. And the kit for the swap is already available and it won't sound like a 4 banger
Pretty much k swap it!!!!
YESSSSSS!!!! Been hanging to see more progress on this build 💯🔥
Looks like a fun car to own. Every body panel bolts on so body damage is easy to repair on rear fenders. What I love is it is a real widebody kit, and you don't have to cut anything to install it. If you put this much into the body then you need a supercharged V6 like the Lotus Exige 430 Cup.
Nah k24
Youcan heat up the fiberglass with a heatgun n make it fit better just dont over do it or itl burn
Your background music so beautiful
Please send it me link 14:04
that's nice, the bodykit looks like the assasin super of Burnout 3
Its going to look bad ass once everything is done to it. Wrap, Wheels, suspension! Cant wait to see the progress in part 3!
This is awesome cant wait to see what you end up with. When done
I'm excited to see the final result!
Paradox you can get some billets from raceline or intro wheels custom made for your car with any size barrels if you want 20x14 i bet they can do it and you will have the fitment you want with no spacer
EVO 3 hubs fit almost perfectly but no ABS. Are 2GR engines easy to come by down there ? might be worth a look in.
Are there other evo hubs that do have ABS? I’m not trying to die
Loving your project ❤ keep at it, I can’t wait to see you wrap it when it’s done 🎉
Resembles a Porsche Boxster with that kit.
That's SICK ! Started following you from MykeMike but I'm still here for new content !! Loyal
The fact you can unbolt a quarter panel still blows my mind lol you can tell I'm an oldschool car guy 😂
Most modern cars can't, but usually it's only mid engine cars that are able to remove the rear quarter panels.
We need a pt 3, 4 and 5 asap!!!
Soon!
I wished I had waited for this kit. I bought the Fortune Veilside kit, and a few months later, this design was out. I ended up getting custom Japanese wheel spacers and converted the 4 lug to 5 lug 5x114 and had advan do a custom wide offset for the wheels to fit the wide body. Good looking car good luck with the build.
Bro get Zeus fasteners...for your body panels...if you don't know what they are look them up...they will make life easier ..and makes it look really clean..just trying to help
😅😂Hey Paradox are you sure we're talking car stuff.... The last girl I was with asked me to JIGGLE it around.😂😂😂😂😎🤙🤙🤙🤙⭐💪
Get some threaded insert rivets, then you can have actual bolts that thread in like they're supposed to instead of using sheet metal screws. As for the radio, you could get a windshield antenna.
You need to move the side mirror’s to the front fender’s that shit would make it pop.
I might do that. It comes with mirrors
@@ParadoxTheWrapper ❤️🔥💯
bodykit from thailand?
Very nice , how much paid for the kit and what brand is it
Ok ok, I see you. Going for that Porsche Carrera GT look!
Love the project. Make sure to fabricate brackets to hold up the quarter panels so they dont sag when vechicle moves up & down. Paradox: USE RIVET GUN to mount the panels.
Panel Bond is a 3M adhesive that is very good and very expensive. I believe they have a few different types for bonding different materials....steel, aluminum, fiberglass, etc.
That gap can be fixed in the Bondo prossess before paint
Awesome kit, all those curves needs a pearl wrap
Those are my wheels! At 10:40
song name at 14:08?
Thats going to look insane wow , cant wait to see it when its done , will really like a body kit like that but add a victorracing wing , bet it will turning heads
This one is going to be awesome!
Panel bond has to go to steel to the fiberglass. Make sure you put is on where is can squeeze out. You can put random dots on the middle to hold it in spots and then do all the way around the part.
This Junx is now a Porschoyota MR001 lol 😂
I can't wait for da finished product
That body kit is fire 🔥
Maybe grab a set of TE37'S depending on what color your wrapping the car those wheels in any color are so sick on a car
For the sound I would go for a 2gr fe swap. With the right exhaust you can make it sound like an exotic. Just listen to the Lotus Amira or evora
Oh yeah I should look into the 2GR
@@ParadoxTheWrapper yeah they already have kits for it and if you drop that Toyota 3.5 in their your kind of building your own lotus 😂.
ruclips.net/video/_B2AkMf0iX0/видео.html
That is one wide body kit big time. You have some wild modifications to do now. Awesome !
This looks stunning
Looks awesome. Kinda reminds me of a Porsche
Dang that looks pretty sik, at first it looked terrible because you didnt install the rear end but now looks cool. Will be fire once u wrap and add wheels!
this kit looks pretty good! reminds me of midnight 3 dub edition
I have the same kit i'm lost on wtf to do with the taillights! please go into detail on the splicing part! AL talks way too fast I don't understand him.
Awesome kit. Maybe add an air suspension. Did u need to do any special fabrication to fit the whole kit?
Im sorry, your MR2 will never B " A Supercar " , you can make it " A Super Wide Car" . Gr8 vid
Is this the LP Warrento gemballa kit from tailand or the turismo kit from the UK?
UK
Bro tryna put a Widebody porche into a small Honda civic body 😂😭
Give it a 1GZ-FE for a more exotic sound
Ah, yes, the MR2. A JDM Fiero. Master of disguise.
No roof definitely the way
Dam paradox that kit is 🔥 were u get that kit I've been wanting to do this look on mine. Can't wait to see the finished product.
Panel Bonding, Just use a Thin Layer of FG... granted ya then Need Filler n Primer but Damn it Looks Sick once Sprayed
How much budget is spent on the entire body kit that you are installing
When you do something like this the word budget doesn’t apply lol
Cool🔥🔥🔥🔥💪 maybe some spacers for the wheels
i just noticed he is turning his MR2 into a 918 spyder Porshe
It would look sick with some Work Meister S1 wheels! 🔥
They would be so sexy
Gonna be dope!! I would def use big washer with the self tappers or riv nut them. 🍻
iis it proshe?
Nice! what kit is this?
What color wrap will this beauty be wrapped in?
Will look great in Ultral gloss army green & carbon
Black rims with yellow and white tire stickers.Woo
Fitment is key . Btw epic car. Ya wife will enjoy this candy wrap a must❤❤❤❤
I think your build would look alot better with the Porsche rear axle and the front end Porsche suspension 😉 👍 . But something needs to go across the doors because they look bare .
Why does it look like a gemballa mirage gt
This is going to be out of this world.
Whats the max size wheels i can put in my 2001 Spyder?
Where did you buy it… all the websites I’ve gone to look super shady and sone of the currency is not even in dollars… If you could please share the link
TurismoUK on instagram
What’s the beat name ?
Pls do like 13-14inch wide wheels. 3pc us had a lot of super aggressive 18s that would work. Or 19s.
Just dont do a super huge spacer and normal size wheels lol. The 20s look hilarious tho. It could actual work.
Even 19 front 20 rear.
why on earth would you want radio, i cant wait for this to finish though looks dope. Im not envious of your upcoming wheel dilema
10:05 need wheel spacers and wider wheels
Where did you buy the kit from?
that porsche carrera gt inspired bodykit is so sexy and cute, its becoming a mini carrera gt.
Where did you get that kit?
panel bond is a glue for cars and trucks
Do Lambo doors!
I wish the made Lambo doors more smooth like the actual factory ones.
Looks good,
Reminds me of a Porsche Carrera GT.
This kit was made to mimic that car.
I think a 19in wheel would fit a lot better than a 20, maybe some SSR or Work wheels.
It's gonna look great! But that's a lot of work to make it look like a Porsche, when nobody pays the slightest bit of attention to actual Porsches on the road😂
😂😂😂
Where can I get this kit from
EYVALLAA
By the time your done next year, I hope you don't end up with the slowest 4 banger "supercar" out there.
Its gonna look sick once done!
Where can i get a kit like this
Wow dude! I’ve never seen a more ridiculous looking body kit but I guess it will finish up looking fabulous! I think maybe a completely new rear suspension set-up is required for an extra 2 feet of track?
Dang thats cool !!
You really should have use Nylok’s nuts, or at least lockwashers. Those nuts will eventually rattle loose . other than that that kit is sick. I hope you have it painted first before you wrap it.
Hot dayum
Can't wait for the next porschen of the vid
A 5cyl would probably be cool🤣🔥
This would have been cool if it was on a Boxter
will it be possible to make a Lamborghini Huracan from a Toyota mr2?
The only thing wrong with it is it now looks like a Porsche 🤔 each to there own I guess we all like different stuff . Panel bond is basically sticking stuff together but I’d advise you to buy good quality adhesive there’s loads to choose from 3M products are good …nice job 👍
Dont run stock suspension. Redo it all so it handles and sits right
You get spacers
reach out to e.carbon for your wheels