How to Replace Wheel Bearing 2009-2010 Pontiac Vibe

Buy Now!
New Wheel Bearing from 1AAuto.com 1aau.to/ib/1AAX...
New Wheel Bearing Set from 1AAuto.com 1aau.to/ib/1ASH...
This video shows you how to install a wheel bearing on your 2009-2010 Pontiac Vibe. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This repair was done on a 2009 Pontiac Vibe GT 2.4L Wagon 4-Door FWD Manual and the process should be similar on the following vehicles:
2009 Pontiac Vibe
2010 Pontiac Vibe
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oBy/1AX...
• Pocket Screwdriver
• Pry Bar 1aau.to/ohE/1AX...
• 22mm Wrench
• 10mm Socket 1aau.to/ow9/1AX...
• 17mm Socket 1aau.to/oBp/1AX...
• 21mm Socket
• 22mm Socket 1aau.to/obU/1AX...
• 30mm 12-Point Socket 1aau.to/on/1AAS...
• Acetylene torch
• Brake Caliper Hanger 1aau.to/obk/1AX...
• Press
• Side Cutters
• Snap Ring Pliers
• Air Chisel
• Torque Wrench 1aau.to/orF/1AX...
• Brake Parts Cleaner
• Copper Anti-Seize
• Gloves 1aau.to/odM/1AX...
• Liquid Thread Locker
• Rust Penetrant
• Safety Glasses
• Center Punch 1aau.to/obH/1AX...
• Floor Jack 1aau.to/oi9/1AX...
• Hammer
• Pick 1aau.to/ofN/1AX...
• Vise
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Pontiac Vibe 2009-2010 2nd Generation: • Pontiac Vibe 2009-2010...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@Leon-qc7fe]

That rotor came off very easy. Do they all come off that easy?

[@jsketcham]

Nice Video.. very clear, easy to understand, covers all the important things.

[@veronicawatson2525]

Dang this is a lot of work for one small piece

[@stubaker1737]

Mine, non abs didn't have that tin shield,,did someone forget to replace it or do non abs not have them?

[@donovang6911]

Unbelievable! What a tutorial! Thank you!

[@cwmaxxout805]

When is the default mileage to change them 200,000?

[@firststep6858]

Great vid !!!