Genesis Coupe 3.8 Automatic Transmission Fluid Change
HTML-код
- Опубликовано: 6 сен 2024
- In this video we are flushing the transmission in the Hyundai Genesis Coupe 3.8. This is the automatic transmission in the BK2 genesis. Same should apply to the BK1 automatic and the 2.0 of both models. Fluid for the 8 speed auto in the BK2 is SP-IV-RR. This is the how to, to help others flush their transmission fluid. We show how we did the flush, and how to check the fluid and fill it.
Thanks for Watching
If you haven't watched my other videos click on my channel or the links below to see them:
INFINITI G35 MOTORDYNE TDX2 SHOCKWAVE EXHAUST INSTALL AND REVS!!!!
• INFINITI G35 MOTORDYNE...
How to Change your Differential Fluid
• How to Change your Dif...
AWD TO RWD CONVERTED BMW 750i ATTEMPTING A BURNOUT!!!
• AWD TO RWD CONVERTED B...
ATTEMPTING BURNOUT IN A 2019 DODGE CHARGER
• ATTEMPTING BURNOUT IN ...
Installing Tomei Titanium Cat-back Exhaust on 2018 Subaru WRX
• Installing Tomei Titan...
I BOUGHT HIM A GENESIS COUPE!!!
• I BOUGHT HIM A GENESIS...
I BOUGHT ONE OF THE CHEAPEST BMW 7-SERIES ON THE MARKET!!!
• I BOUGHT ONE OF THE CH...
INSTALLED A EXHAUST ON 2019 Toyota Camry XSE 2.5L
• INSTALLED A EXHAUST ON...
WE TRIED TO DO A BURNOUT ON THE 2019 TOYOTA CAMRY XSE 2.5 FAIL!!
• WE TRIED TO DO A BURNO...
Camry Burnout Blooper Video
• 2019 Toyota Camry 2.5 ...
POWEDER COATING MY GENESIS COUPE BREMBO CALIPERS
• POWEDER COATING MY GEN...
VOLKSWAGEN JETTA SHOOTING FLAMES
• VOLKSWAGEN JETTA SHOOT...
DRIVING FERRARI IN SNOW!!
• DRIVING FERRARI IN SNOW!!
Honda S2000 Revs and Launch!!!
• Honda S2000 Revs and L...
400HP BMW 335i REVS and LAUNCHES!!!!
• 400HP BMW 335i REVS an...
FAIL DRAG RACING IN THE SNOW MANIFOLD ALMOST ON FIRE!!!!
• FAIL DRAG RACING IN TH...
Driving Ferrari 360 Spider LOTS OF REVS
• Driving Ferrari 360 Sp...
How to Change Forge Wastegate Spring for Hyundai Geneis Coupe 2.0
• How to Change Forge Wa...
Replacing the PCV Valve on the Genesis Coupe 2.0T
• Replacing the PCV Valv...
Toronto to Winnipeg And Back Time Lapse
• Toronto to Winnipeg An...
DROVE FROM TORONTO TO WINNIPEG TO PICK UP PARTS
• DROVE FROM TORONTO TO ...
Strada Season Opener Car Meet 2019
• Strada Season Opener C...
Installing Forge BOV Spring On My Genesis Coupe
• Installing Forge BOV S...
INSTALLING THE CLUTCH ON MY GENESIS COUPE Part 1
• INSTALLING THE CLUTCH ...
INSTALLING THE CLUTCH ON MY GENESIS COUPE Part 2
• INSTALLING THE CLUTCH ...
Corvette REVS and LAUNCHES
• Corvette REVS and LAUN...
HAVING FUN DRIFTING IN THE SNOW!!
• HAVING FUN DRIFTING IN...
that fluid looks clean.
That's what I thought.
Interesting. You removed the "Level" drain plug and got a ton of fluid before removing the "Drain" plug. I thought the purpose of the level plug was to show if barely any fluid is coming out the transmission is properly serviced...similar to servicing the differential.
mine is brown... dont think the previous owner ever did one. I'm at 160k miles...
One thing this video forgets to mention. Is that the trans oil filter is molded into the oil pan. So the proper procedure would require an oil pan change too
The reason for opening the fill plug first is, if u drain the trans before u take out the fill plug. And the fill plug won’t come out. How are u gonna fill the trans?
I have a 2015 Hyundai genesis coupe I got with very low mileage last year for a really good deal. Its a nice quick car and with some basic mods it can go from 0 to 60 in the 4 second range compared to the factory 5 second range. The only major complaint I have for this car was the automatic transmission feels laggy. My advice is go for the manual ones
aye, managed a 4.8 0-100km/h so guess 0-60mph could be aroun 4.6 at best. Yes the auto is slightly "laggy" mostly on downshifts, but it mostly becouse of the map on the tcu that is conservative.
Theres a lot of complaints about the manual transmission on gennies. Its actually advised to get automatics. The 8spd ones specifically.
I heard a tune or throttle controller fixes the lag right up. What mods did you do for 4 second range?
Get you a TCU tune. My shifts feel way more responsive. From factory it’s not the quickest shifts, mine wasn’t that laggy tbh but i still feel a big difference with the tune.
What is the level plug for? You're filling it up with ATF and checking it's overflowing at the fill plug.
Level plug shows you the level on the fluid but you have to keep filling it comes out of the fill plug. You open both drain and level plug to get out most of the fluid.
@@JustRandomCars service manual says to use overfill (level) plug to check level. On the differentials you use the fill plug to check level.
Should I flush or change my transmission fluid? I got my 2015 Genesis G80 3.8 a little under 100k, and never asked if the previous owner changed the fluid prior. Now I'm at 116k (drives fine), and never flushed or changed it. What should I do? I don't want to damaged the transmission doing so.
Definitely drain and fill, a flush on these cars destroys the transmission because of the very narrow passages on this transmission.
@@itsben8156 Thank you!
where does that clack sound come from! which is heard at minute 4.13 when entering reverse.
If i pull the drain and let it drain till stop on an automatic 2013 3.8 how many quarts does it take?
Good vid. I would recommend replacing the filter and pan.
Thanks, will do!
Drewism How do you replace your pan? Because AFAIK, if you remove fluid, you need to quickly fill oil back in because the grains of the gearbox grains cant go dry.. Is it a fast bolt off and on the process? or do i have to apply silicon and wait for it to dry?
Was the fill plug on the driver side?
Yes
Great video boss thanks!
Thanks
BK1 and bk2 trans are completely different. BK1 is 5 speed auto, bk2 is a 8 speed auto. Different trans. I can’t remember what the name is I have to look tomorrow
BK1 2.0 is 5 speed tranny, BK1 3.8 is ZF Tranny 6 speed, BK2 Tranny is 8 speed
I was changing my transmission oil on my genesis , same exact year and transmission, it wouldn’t give any oil back from the fill , but when I opened the level plug, a bunch started coming out .. what do you think could be the reason ?
It probably needs more transmission fluid. Did you measure how much fluid came out originally. You fill it using the fill bolt til it starts dripping. If it does not drip then you will need to keep pumping. If the level bolt is full then you start up the car get it to operating temp and check the level, if fluid comes out then it is full, if it does not then the transmission needs more fluid.
I have a 2010 genesis coupe 3.8 grand touring. Is it the same one like yours help !
What problems where u having ? Did u fix?
Would the process be the same for a 3.8 genesis coupe?
That's the title of the video? Maybe you mean the 3.8L sedan?
Would the 2.0t take the same fluid?
how about replacing the filter or its not recommended
The filter is built into the pan. If you want to replace it then you will have to replace the whole pan. We didn't bother to change it. But if you want you can change it, it all depends on your cost.
@@JustRandomCars changing the oil and leaving a filthy filter in is bad idea, the filter is loaded with debris from clutch wear and metal from gea wear, this contaminates the new oil plus reduces oil flow and increase pressure on the pump. This video is the cheap guy fix, avoid not changing filter
How much quart did you put in it
How many mile the car covered before you change the oil ?
Iam just about to hit 60k miles and still did not change the transmission oil
This car has roughly 150k km on it when we did the flush. Check your service manual for fluid replacement intervals.
@@JustRandomCars Thank you.
How can i tell if my transmission fluid is low? How do i check?
The only way to check is to lift the car on a hoist and having the engine running with the car in neutral and parking brake engaged. You would open up the level plug and see if fluid comes out. The genesis don't have a dipstick for the transmission. If you have a leak then the fluid will be low otherwise they are a sealed unit and the fluid does not go low.
So a gallon of fluid should be enough?
1 Gallon in liters is 3.785. It was close to that. Took almost 4L. But always check how much fluid comes out first. Then put the same amount back in.
Is it safe to change the fluid ??
Yes, drain and fills are always safe. The myth is for flushes anyways.
hi is this mount as the same in 5.0 engine?
Hey, I'm not sure if this is the same mount. But the sedan and coupe use the same automatic transmission.
@@JustRandomCars Ok how much liters you put 3.5 or 4 ???
@@doctorabbas542 It was close to 4L. But see how much comes first then fill close to how much came out.
@@JustRandomCars Thank you
My 2010 3.8 Bk1 only has one screw on the bottom, and I for the life of me can't seem to find the fill hole. How would I go about finding out how much I need to fill it up to, without the overfill hole to help. You know, once I find the fill hole. 🤦🏽♂️🤦🏽♂️🤦🏽♂️🤦🏽♂️
Check how much fluid came out by pouring it in a container that shows the amount like 3L or 4L etc...
Put the exact amount back in.
The fill bolt should be on the side of the transmission.
What transmission fluid does it take?
SP-IV-RR is the fluid specification for the auto transmission
Thank you brosky and when you said "it slipped" did you mean your transmission or the car slipped as in it lost traction?
The car lost traction