Thank you so much! I think the plastic one will still live in a drawer as it'll probably just end up in landfill if I chuck it out. Glad you like it, was a lot of fun this one. 😁
Coolness, learned something again from you. Wasn’t sure how you were going to carve out the scoop, but then you showed us and it was like of course….. Thirsty for some fresh brew now
Thanks buddy! That grip chuck was inspired but you saw it for the first time as I did when cobbling it together 😂 Now I know it works I can have a proper go at making one that might look a bit prettier, rather than a Frankengrip haha. Go on, flick the kettle on, I'll have one!
Cheers Matt! This is something I've been wanting to make since getting the coffee machine, can't believe I left it so long! Thanks for watching mate! 👍
Thank you!! I know what you mean, when I do a production run of something the first thing is to make one item, then a template which will often take longer but ultimately speeds up the rest of the job. Nothing more time consuming than having to constantly go back and forth changing the caliper sizes. Thanks for watching!
Cheers Mike! I feel like I drink a lot more coffee now than I did a few years ago but it's ok, when I start getting the shakes I just lay off it for a few days 😂 Thanks for watching mate!
@@makermark1 Definitely stuck fast! I only put three screw holes in at first but I wasn't thinking straight with the heat and drilled them wider than the heads of the screws.. Amateur move 😂
Cheers Doug, it scoops there or thereabout the same amount as the plastic one but it did work out a wee bit shorter than I'd wanted, my own fault, i've always struggled with getting close to spheres, guess what i'll be practicing soon haha. Thanks for watching!
No idea why you only just decide to notify me this video was up lol. Anyways looks awesome Tim great product idea and the jig work to make it Aston @IWMS
Cheers Aston!! I've noticed that sometimes, a vid goes up then the notification comes through days after the fact 😂 Thanks for watching mate, hope you found it useful!
So, you're a three-scoop-man eh? Just the kind of steel-nerved chap we're looking for in... the Department. (cue spy music) Personally my nerves are like jelly and I held my breath all the way through the hollowing of the scoop. Great vid as always Pog, you just go from strength to strength. Cheers mate. (I'll be in touch about the spy recruitment thing. In the meantime, don't tell anybody.)
Haha cheers Mark, I will keep watch for 'the sign'! 😂 The scoopy hollowing wasn't too bad really, for the second refinement of the grip I am going to countersink the screws as that looked like the only bit that could have caused problems. Very much against the temperature clock yesterday though, was close to 30°C at noon when hollowing and finishing up 😂 😅 Thanks mate, hope you're well!
@@tfturning Hot, yeah, I understand mate. My workshop has been like an oven. And ironically our actual broke down this week - I'm sure there's a lesson here but I have no idea what it might be. Anyway, it's a lot cooler here today, rain overnight and I'm really glad of it. Cheers mate.
@@MarkMcCluney Me too mate, just been and done a food shop, hot when I went in, raining when I got out and noticeably cooler. I took a moment and just stood in it for 5 😂 Thought I would have looked crazy but there were a few others across the car park doing the same haha.
@@tfturning I just got my machine in November and bought a tamper on Amazon shortly afterwards haha. If I could do something like this I totally would have! BTW this is a great channel you have here and I am glad to have found it. New sub
I love the little guy making his way across the lathe in the beginning of the video! 🤓
Glad you like it, thanks for watching! 😀
Genius jig!! Now you have a scoop and tapper that will last for a lot longer than plastic!
Thank you so much! I think the plastic one will still live in a drawer as it'll probably just end up in landfill if I chuck it out. Glad you like it, was a lot of fun this one. 😁
Beautiful and functional, definitely better than the plastic one. Keep well, Rob
Thanks Rob, much appreciated mate!
Coolness, learned something again from you. Wasn’t sure how you were going to carve out the scoop, but then you showed us and it was like of course…..
Thirsty for some fresh brew now
Thanks buddy! That grip chuck was inspired but you saw it for the first time as I did when cobbling it together 😂 Now I know it works I can have a proper go at making one that might look a bit prettier, rather than a Frankengrip haha. Go on, flick the kettle on, I'll have one!
Clean work👌 You show the woodturning process perfectly. Congrats🛠️
Thanks brother, you're too kind! 😊
Nice scoop Tim 👍 I’ve never thought of putting a stand on it. I like it ⭐️⭐️⭐️⭐️⭐️ keep up the good work.
Cheers Matt! This is something I've been wanting to make since getting the coffee machine, can't believe I left it so long! Thanks for watching mate! 👍
Nice work and interesting process, thanks for sharing. Full View and Like 👍
Thanks for watching Allen, much appreciated 👍😁
Nicely done. For some projects I've spent more time making a jig than the actual thing.
Thank you!! I know what you mean, when I do a production run of something the first thing is to make one item, then a template which will often take longer but ultimately speeds up the rest of the job. Nothing more time consuming than having to constantly go back and forth changing the caliper sizes.
Thanks for watching!
I think that's a massive improvement on the plastic one, especially as you need a bit of compaction to make espresso! Great work!
Cheers mate, I think so too! A little disappointed that it ended up shorter than planned but..no biggie, I'll just make another 😂 Thanks for watching!
@@tfturning if you make another one do you think you will sell the other?
@@realretrorelapse Absolutely, If you'd like me to make one up for you drop me an email to chat about it.
Really nicely done Tim!
Cheers pal! Really enjoyed this one, was like a problem solving task, I don't have a jig, right, i'll make one 😂
Great idea👍🏻I don’t drink coffee, but may have to try to make one of those for the guys at work. Nice job!
Cheers Mike! I feel like I drink a lot more coffee now than I did a few years ago but it's ok, when I start getting the shakes I just lay off it for a few days 😂 Thanks for watching mate!
Nicely done Tim, well done! 😃
Thank you Val 😁
Bravo Tim ça sert à quelques chose top 👍👏👋
I had used the plastic one for so long even though I could have made one at any point over the last 18 month haha. Merci Denis! 😁
Nice work Tim very well done 👍
Thank you Barry, much appreciated mate! 👍
This jig is amazing!
I want to make it too.
Thank you for a nice video!👍👍
Thank you too for the kind words and for watching 😁
Top job Tim, great jig. keep well, John
Thanks for watching John, glad you like it! Super happy with the jig, now I know it works I can refine the design a little. 😁
That is great. Love the 2 in 1 idea.
Thanks mate, seemed the right thing to do to combine the two 😁
Awesome brother always need a great coffee scoop 😀
Thanks man! Glad you like it 😁
That is brilliant Tim.
Great video as ever.
Take care mate and nice cameo at 8.25.
Cheers, Huw
Thanks Huw! Pressure was on with this one to get it ready as I only started turning at about 11 yesterday morning 😂 Cheers mate!
@@tfturning I've kept the video as may well be making some for my craft fairs.
👍Great technique, I really like how you presented the video.👏👏👏 Bye😊
Thank you my friend! Glad you liked it 😁👍
Really
great idea. The wood chuck is awesome! 👍
Nice one Mark! Pretty happy with how well that chuck worked out, could have gone either way 😂 Thanks for watching mate!
@@tfturning better than the usual"jam" style chuck though. That baby was not going anywhere! 😁
@@makermark1 Definitely stuck fast! I only put three screw holes in at first but I wasn't thinking straight with the heat and drilled them wider than the heads of the screws.. Amateur move 😂
@@tfturning heat will do that. I live in Australia mate 🤣
Nice job nice demonstration 👍
Thanks for watching Luie, hope you found it useful 😁👍
@@tfturning sure did👍
great job mate
Cheers Mark!
Very nice. Smells good from here. I’m guessing you got the size of the scoop right. Well done Clint.
Cheers Doug, it scoops there or thereabout the same amount as the plastic one but it did work out a wee bit shorter than I'd wanted, my own fault, i've always struggled with getting close to spheres, guess what i'll be practicing soon haha. Thanks for watching!
No idea why you only just decide to notify me this video was up lol. Anyways looks awesome Tim great product idea and the jig work to make it
Aston @IWMS
Cheers Aston!! I've noticed that sometimes, a vid goes up then the notification comes through days after the fact 😂 Thanks for watching mate, hope you found it useful!
Nice!!
Thank you! 😀
So, you're a three-scoop-man eh? Just the kind of steel-nerved chap we're looking for in... the Department. (cue spy music)
Personally my nerves are like jelly and I held my breath all the way through the hollowing of the scoop. Great vid as always Pog, you just go from strength to strength. Cheers mate. (I'll be in touch about the spy recruitment thing. In the meantime, don't tell anybody.)
Haha cheers Mark, I will keep watch for 'the sign'! 😂
The scoopy hollowing wasn't too bad really, for the second refinement of the grip I am going to countersink the screws as that looked like the only bit that could have caused problems. Very much against the temperature clock yesterday though, was close to 30°C at noon when hollowing and finishing up 😂 😅
Thanks mate, hope you're well!
@@tfturning Hot, yeah, I understand mate. My workshop has been like an oven. And ironically our actual broke down this week - I'm sure there's a lesson here but I have no idea what it might be. Anyway, it's a lot cooler here today, rain overnight and I'm really glad of it. Cheers mate.
@@MarkMcCluney Me too mate, just been and done a food shop, hot when I went in, raining when I got out and noticeably cooler. I took a moment and just stood in it for 5 😂 Thought I would have looked crazy but there were a few others across the car park doing the same haha.
LIke it man.
Cheers Dale, much appreciated!
Nice job. Those plastic things are crap lol
Cheers, yes they are and I put up with it for far too long haha
@@tfturning I just got my machine in November and bought a tamper on Amazon shortly afterwards haha. If I could do something like this I totally would have! BTW this is a great channel you have here and I am glad to have found it. New sub
@@realretrorelapse That's awesome, I bet your knee deep in sawdust already!! Cheers buddy, good to have you here and thanks for the sub!