Incredible Manufacturing Process of Hexagon Bolt & Nut in Factory || How It's Made Nuts and bolts
HTML-код
- Опубликовано: 24 янв 2022
- Incredible Manufacturing Process of Hexagon Bolt & Nut in Factory || How It's Made Nuts and bolts
#boltmakingprocess #stepbystepboltsmaking #howIt'smadenutsandbolts 
Авто/Мото
Hands down this is the safest machine shop in Pakistan. The workers in this shop have safety gloves and safety boots. In all previous videos of machine shop in Pakistan I have never seen safety gloves and boots. Safest in Pakistan.
They have steel toed flip flops 🩴.🤔😁
It is sad but you don't know why they are willing to sacrifice their safety for some pennies.
Yes, it is an OSHIT approved shop
What a neat little factory. No safety hazards or work environmental issues.
Bullshit
it's perfectly safe according to experts here...and pigs also fly
Lol.
Health and safety Legislation only applies to western countries as they cause alot of accidents and they act like fools.
Scary to think this country has nuclear weapons also. How much safety and regulation goes into them
1:20 I am very sure that this instrument is highly accurate and recently calibrated by that punch.
Quality control passed
It's engineering thing if in doubt give it a clout.
ha ha
Yeah 😂
🤣🤣👍
These workers are amazing. Don't they measure anything? You would think that the bolt turned diameter and chased threads would be inspected at the lathe. Cut threads VS rolled. Cut are much weaker with the most vulnerable part of any cut screw thread being up at the thread runout near the head. This presents a high stress concentration.
Unbelievable, I have finally seen a pakistani worker with shoes, no protective booth, but any how some kind of protection. But nice job. Greets from Venezuela,
Finally! Workers wearing shoes 👏👏👏
And one with glasses behind the lathe ;)
@Gatze Labordus, the owner must've been properly educated in the west
great making process video~ 멋진 과정!
1:17 scale calibration
+-2 Kg _)
Ola. Muito bom. Gosto demais dos seus videos. Seu trabalho e muito importante. Um grande abraço e admiraçao do Brasil
0:17 мин-резьбовой резец закреплен ОДНИМ болтом, сделанным им же.)
So crazy to see how to see how bolts are made by hand. Ended here after watching How It’s Made on bolts. Machines that pump out 300 bolts per minute. Still so cool to see the craftsmanship in making them by hand
Which machine???
12:30 Гениально! Укоротив рожковый ключ сделать из него оснастку для быстрого снятия вращающейся заготовки гайки. Чтобы не получить удар в лоб от обычного ключа!
That is amazing. Thanks for sharing.
What exactly amazes you? Lack of safety? Harsh environment? Child labor? Or the fact the those bolts are not annealed properly?
I see this and it really makes me realize how soft the “west” is with all its “influencer’s” whining about how bad they have it!
I could never understand why everything gets thrown on the floor
their floor is our table
@@richardebbole1 plus, that way everyone is busy... in a place w/o TV, pensions etc it is important to keep everyone busy.
Wet earth - rust, sand in the carving, dirt .. Indeed, why not organize the work normally? Someone has to clean up there!
@@hibahprice6887 No, they don't.
Hy
В конце видео чувак подбирает эксклюзивные гайки к эксклюзивным болтам... Это хайтек, детка!🤣
I'm guessing they are wheel studs and lug nuts. Interesting that the studs are not serrated. Means they either have to get welded in place, or their diameter has to be very precise to get a tight fit. Hmm.
We weld it
I had the exact same thoughts
Nice video, thank you :)
Nice workers. No computer adict here,no ! Real quality workers !
мужики всем вам огромный привет молодцы
Mad Max is here!
Интересные технологии
This is nuts!
No, it’s bolts
Те кто пользуются этими болтами - нинзя. Those who use these bolts are ninjas.
Super!!!!
Thnkx
Nice working
Pekerjaan yang sangat luar biasa
Travail d’esclavage.
Good job
Thank you
🔥🔥
i'll bet you could sell those in a nice box in one of those upscale tool catalogs. "Arsenal heavy duty bolts from scrap"
Amazing
Hame to bass tarazu on karne ka tarika 1 no laga
unbelievable
Secondo me la tecnologia usata e del 1940 -1950 , che per l’epoca non era male. Questi video secondo me, mostrano il grado di sfruttamento di quella gente nel era dei macchinari cnc . Quei bulloni nel loro mercato costeranno 10 centesimi e qualcuno li importa nei paesi sviluppati per 10€ .
Where´s the Hexagon on the bolt?
These appear to be lug bolts and nuts for truck hubs, interference fit on the bolts, no hex.
Thats a serious Nut for such a small bolt head. I wonder if they get quenched later for hardness
Excellent 👍👍, use gloves and spectacles for safety. As you are dependent on fitness
Cual cinco eses desconocimiento total y de seguridad mejor no hablar. Pero si admiro estos obreros son excelentes
Wow! How can these people live like that... and they have nuclear power!
Hexagon nut? Yes.
Hexagon bolt? No.
Is that the finished product?
Looks like large wheel studs and nuts but there's no splines on the studs.
With what we get to see on the video unless it's a pretty serious interference fit or a weld-in-place stud I believe the torque required for that size nut would, sooner or later, spin the stud.
Edit:
Maybe the quality of the material and finish makes it a rust-in-place fit.
Lol
What about the fact that there are no stress relief procedures or heat treating on those studs or nuts. RIP those traveling along side those wheels…
@@rxpsycho7326
Based on what we got to see in the video Grade 2 would be the highest they could be for proof, yield and tensile strength. Again if that's the finished product.
Thanks for these Comments, from what I see, they are valid:
“…Lack of spines, huge interference fit or weld in place, quality of material and finish, no stress relief or heat treating and quite possibly the Grade 2 strength.”
This is a very different manufacturing culture, than that to which I am accustomed. Frankly, I was shocked.
RL
@@rlewis1946
I'm not surprised by what they do there to get by. It may be India or Pakistan in the video idk.
I lived in Burma(Myanmar) in ('87 and '88) and they were even worse at some things they manufactured because of being so poor.
They had wonderful artisans and even well trained engineers (British taught for decades) but they didn't have all the tools/machines even if they knew the correct methods. They just made what the could make.
The US and other western nations helped with donations of agricultural equipment, supplies, maintenance training etc.
The ones I really admired were the wood-worker artisans that could make just about anything from teakwood, rosewood, ironwood, bamboo, wicker etc.
If you had an idea, sketch or actual blueprint they could make that item.
@@user-br3ou2cs9o thank you for your humanity
Я считаю, что на колесных шпильках резьба должна быть накатана а не нарезана. !?!
Прошу заметить, что прочность резьбы при нарезки-выше. Исходя из гостов на крепеж высокого давления, позволяется только резаньем изготавливать резьбу,
@@user-xq9js9vj3l Согласен, только нарезать надо плашкой, а не каким-то непонятным резцом
@@user-xq9js9vj3l ага, только я собрал десятки машин и узлов, ни одного болта с нарезанньй резьбой, внезапно, при максимальной прочности в 6 рисок, все накатка, и колесные шпильки
If I don't cut it, how do I measure it?
I know that but I have no source
At the 3:40 mark… somebody is yelling! Must’ve dropped a red hot bolt on his safety sandals.
Oui.
Ces ouvrier travail comme des esclaves. Aucune protection. Ni assurance. Et rien du tout.
C’est ça la dictature qui régner au par avant.
Le patron lui empoche des millions de dollars 💵💵💵 pour s’amuser bien de la vie 👯♀️👯♂️😹💋💋💋
токарь какой весёлый, делает сыромятину но ему весело где термообработка.
Oui. Il s’amuse bien comme un esclave.
Workers are wearing Regular clothes.... Did they run out of pajamas and nightshirts?
I seen a pair of safety sandals… that count?
Why they trow every thing on the floor. Look mom i have new job in a safety companie. The guy at the end seem to be happy
I bet they have fun accounting for inventory. LOL
ماشاءالله
"hey guys before we start today safety meeting".. never heard in this place
I wonder how often this crazy video gets viewed? - the [Russian??] person before me was only by 2 weeks.
:)
Next time my workers complain about their work I will show them this video.
this town has 21 men with one hand and/or 1 foot, 45 with lung disease, 10 totally blind.
Да.. Термообработки после штамповки нету, зато воронение есть.. Кровь из глаз
@@alexanders9655 скорее всего уже на автомате рабочий знает что и насколько провернуть, чтобы получилось как надо. Это как езда на машине или велосипеде: вы не думаете как нога нажимает на педаль и на сколько градусов повернуть руль, а просто нажимаете и крутите и получается как надо
@@tituszx1 сам то подумал, что написал? он не это имел в виду
@@user-cr9xj9sp4e Ответ был для Alexandr S, но походу его комментарий потерли. А разговор шёл о том, что рабочий крутит подачу не смотря на лимб
I've seen hundreds of pakistani worlshop videos. This is the first where i see a worker wearing shoes.
глаза совсем не жалеют
*Those are NOT Hexagon Bolts* The Red Dot tells All. Why throw them on the ground? Use a box.
The bolts are left hand thread?
i wonder the same
This is wheel studs for medium duty trucks
esta bueno que no sea tan automatizado para que la gente tenga trabajito solo seria de ir yo a poponer una planta de galvanizado en frio y en galvanizado estructual y listo todo el proceso hay saldria un producto terminado
9:15 TOXIC AVENGER🧟☠💀
Le pas de vis est à l'envers non?
At least they are not wearing flip flops.
Amazing work 🦾
Болт болту рознь, рискованное изделие, пользоваться нельзя. Bolt to bolt discord, risky product, can not be used. ))) Но в Пакистане можно. But in Pakistan it is possible.
Thnkx sir 🙏
I'm owner of this factory
Somebody gotta do it & are those bolts & nuts qualified as man made....
HAHA, I almost shit myself when the guy takes the weight scale and slams his hand on it a few times. I'm sure it is really accurate now. SMH
otimo
Yes. The work is good . But you can advise them for a minimum of safety. Like the guy who's breathing with the acid when he's putting the metal in the liquid.....no comment!!
Not sure that's acid. It would have eaten through that garbage can a long time ago.
Какой смысл несёт взвешивание на столь точных весах при таком техпроцессе? 🤣
Чтобы при последующей ковке хватило металла и лишнего не слишком много стачивать.
Странно что резьбу на болтах режут, а не прокатывают. Хотя может на таких диаметрах проще резать
я еще поржал на моменте когда весы стоят не горизонтально.
👍
Wonder what the hourly rate is or monthly pay
A lot of people working hard, in hazardous conditions, making a very borderline product. Unknown steel, uncalibrated tools, no QC, no quenching. Not a recipe for good profits, good reputation, or future growth and success.
HOW ARP bolts are made..
Я что то понять не могу. В гайке резьбу резали правую, слесарь в конце гайку закручивал по часовой. А ВОТ ТОКАРЬ РЕЗАЛ ЛЕВУЮ насколько я знаю.
такая же фигня, сам не понял, на болте левая, на гайке правая, и в конце тоже болты с правой
@@tibam6912 Секретка, чтоб колеса не попи3дили.
Думаю оба вида делают, в конце показали правые, красной краской помеченные
Где-то может в другой куче лежат и левые, скажем зеленые
@@tibam6912 Судя по всему у них так кинематика настроена, что получается правая резьба.
@@russiantexno как токарь скажу, там не кинематика, там режется именно левая, так как сход стружки идет вверх, да и по виткам видно что левая
Is this England?
How can people work in such a mess and clutter
Where it located
Made from unknowneum steel grade.
Kahan per hai factory
Объясните, как он получает ПРАВУЮ резьбу при ПРЯМЫХ оборотах и подаче СЛЕВА-НАПРАВО? 😳И резец не перевернут и не стоит за заготовкой!
Или она все-таки левая на болте, присмотрелся...
То похоже шпильки, для грузовых колес, на них левая резьба
+1 В нашей говенной рашке и такого нет.
So how do you tight them exactly? Are they welded than tightened?
most likely
I think they are wheel studs and lug nuts for trucks
Да...........
Europe of the 50s
Ye to high way ki sariya hai
why its in black color? black oxide?
Men of Steel
No creo que sean confiables para uso automotriz o industrial
Saludos
Bolt ke rate milenge kya
ترازو میرے ریموٹ کی طرح ہے جب تک زور سے نا مارو کام نہیں کرتا ھے 😂😂😂
Two Hundred years ago kindda...
единственное что понравилось 1 токарь был в очках))
И да там малой делает и правую и левую резьбу!!! В 2 разных тазика ложит!
Astea sunt suruburi pentru navete spatiale pakistaneze.
The workers in this factory appear to be wasting so much energy forever banging the products to release them from the equipment.
Content warning! The bolts and nuts are heavily bleeding 13:55
Even Rolls Royce bolts are not hand made. 🤣
Usines d’esclavage.
Des pauvres ouvriers qui bossent toute la journée pour quelques dollars 💵💵 3 ou 4 dollars par jours. Pour s’acheter du 🥖🥖🥖 et un peux de sucre et thé.
Tandis que le patron s’amuse bien. 💋💋💋👯👯♀️👯♂️
пластилин.
и с такими шпильками возят по 50 тонн. Кто им дал ядерное оружие?
сами сделали также :-))))))))
@@user-cr9xj9sp4e Боюсь представить их ядерный реактор
Which thread are they cutting oh the lathes?
4inch
@@adeelumer8797 Thanks for the reply. I meant which thread etc. BA., Whitworth, BSF, Metric or some other thread.
The same one they’re tapping in the nuts. The nuts are supplied with the bolts, so who knows what the thread actually is, as long as it matches?
Pakistani ARP Fasteners