Subaru Wrx Sti OEM Rain Guard Install | DIY Guide
HTML-код
- Опубликовано: 27 июн 2020
- Today we install OEM Subaru Rain Guard and Window Deflectors on Jonathan's 2015 Subaru WRX Sti! It's a pretty straight forward install if you follow these easy steps. Thank you for watching and feel free to comment with any questions you may have :)
Products Used For Install:
CarPro Eraser: amzn.to/3g7P0Mi
Kirkland Microfiber Towels: amzn.to/3dFwyJp
Connect with me on IG: / driveitryan
Jonathan's IG: / driveitryan
Check Out My Team Channel "The Slip Angle" where we have more videos on this car!
/ theslipangle
/ slipanglemedia
Gear Used In This Video:
Camera - Canon Eos R: amzn.to/2JAiggA
Lens - RF 24-105 f/4L IS USM: amzn.to/2VaKSmf
Rode VideoMic Pro: amzn.to/346oSN4
GoPro: amzn.to/345uK9n
GoPro Head Strap: amzn.to/2yvenHE
Laptop: amzn.to/2JC7rea
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting so I can continue to provide you with free content each week! Авто/Мото
10 Likes and Jon has to buy authentic JDM Wheels!
I wish I had shown how to install the clips because my dumbass rushed and installed them upside down, breaking the clips and where they attach to the rain guard🙃
How many JDM cred points does this add?
Mad Points Yo!
Gotta be at least 250 points. About to install on my '19 STi. Sizeable chunk from the 9000+ required
I have the same exact car in black. Has to be the absolute worst rain leaker I've ever owned lol. Even washing your windows while rolling at highways speeds... You're gonna get water Directly in the window switch on driver side lol. And the road drone on mine is horrible as well... Subaru life ahahha
No heat gun? I watched other videos with installers saying it’s important to have heat gun to stabilize the stickiness.
It’s going to make it more difficult to align if you take the white strip off the 3m tape and heat it up before installing. You’d basically get one shot at it. I can tell you that we’ve had no issues since the install and this car is not driven slowly!
@@DriveItRyan So I don’t need a heat gun, just to clarify?
@@DriveItRyan Cuz I’ve seen folks install it, put pressure, then apply the heat on the installed sticker & apply more pressure.
@@ArnoldC nope you don’t need one! I would use one if you are forced to install it in freezing temps, but otherwise you should be good without one 👍
@@DriveItRyan I guess I need one because it’s 30 degrees here. :(
when your shorts and shoes match ur car....... :)
tried to get my mom to drop a like but she is a Mazda lady..sorry
window rubbers..
These cut wind noise down with the windows slighty open..?
Hug and kiss
N x
neil2015999 you got it! I’ll get some mazda content up for mama soon :)
@@DriveItRyan excellenteee :)
Needs wheels for sure ! Quit slacking
Richard Kailukaitis tell em Ricky! 🙌