【#11】MP4/5B マルボロカラーを丁寧に塗り分けます!【1/20 TAMIYA】Carefully paint the red and white body colors!
HTML-код
- Опубликовано: 25 авг 2024
- マクラーレン・ホンダ、マルボロカラーの赤と白。
フィニッシャーズのMP4カラーを使ってリアルに表現!
このカラーを塗装するのは、いつも緊張します。
McLaren Honda, Marlboro color red and white.
Realistic expression using the finishers' MP4 color!
Painting this color is always tense.
マルボロカラーはいつもこれを使ってます。
フィニッシャーズ MP4カラー amzn.to/2IMLc8w
#mp45bpainting
#AyrtonSenna
#マルボロカラー塗装
#marlborocolor
#赤白塗り分け
Amazing work, thank you
I'm glad you said that! Thank you!
Good to see a good scale maker and not a painter. near perfection
I am glad! Thank you 🤲
Very clean and beautiful masking and painting! Finisher's colors are great
It's very difficult to paint different colors.
This color would be very nice.
Thank you!
Nice! Good job cleaning up those bleeds.
Thank you!
待ってました‼️私は素組みか、部分的な筆塗りしか出来ないけどエアブラシにも挑戦したいと思う。身体や指が不自由だから苦労すると思うけど、いつか綺麗な塗装出来たらいいな🎵
おまたせしました^_^💦 エアブラシじゃなきゃいけないってことはないし、素組みだって丁寧に作れば綺麗に仕上がりますよね。でもエアブラシにチャレンジするのもいいですね😉 なにしろ楽しむことが大切です。焦らずゆっくりね👍
息するの忘れて観ている時がありますw
ありがとうございます!
Looking amazing! one thing I noticed, the red color on the real car is a bit more orange than the Tamiya color, and it looks like they changed the formula, I built this model a few years earlier and the color looks fluorescent orange, closer to the real car; recently I built the mp4/8 and the color came redder like yours. One thing I did differently the first time was to use an automotive clear coat so I'm puzzled why the colors look so different. I think your approach of adding the other color on top helps a lot.
You are very familiar with the colors of this machine! It's very difficult to get the color of this machine. The appearance changes with clear painting. I want to get the color I want by trial and error. Thank you!
I'm sorry I'm not good at English.
@@Car_model_channel Hi apparently the color used for the real car is called RAL3024, But the person that build the model shown here bought a paint color called "Lumo Red" check this forum www.pistonheads.com/gassing/topic.asp?h=0&f=159&t=1405849&i=120 I gues you can try it next time you build a Mclaren.
へー!MP4レッドって言うんだ。
やっぱタバコのデザインて
良いですよねー
そうなんです、フィニッシャーズというメーカーが出してる塗料で、色合いが気に入ってマルボロカラーにはいつもこれを使ってます。
タバコのデザインは良いですよねー!
今マクラーレンホンダMP4/4を作ってます。
赤と白の塗り分け部分ではみ出た赤の部分はナイフで削ったほうが良いですか?
塗分け部のはみ出しは、とても悩ましいところで、、
使う塗料やはみ出し具合によっても、処理の仕方が違ってきます。
ほんの少しならナイフで削ってごまかせるのですが、大きくはみ出したり何か所もの場合は、再度マスキングしてホワイトを塗る方がいいかもしれません。
何しろ台数をこなして慣れるのも大事だと思います。
完成させるためには、ある程度の妥協も必要だとおもいます。
@@Car_model_channel
どうもありがとうございます。
こんにちは!また余計な事で、すみません。塗り分けするときは、マスキングが終了後に、マスキング下に他色が入らなくするには、マスキング部だけにクリアー吹き付けて見て下さい。クリアーが染み込んでも、後処理が楽ですよ。
塗分けにもいろいろなやり方がありますね。ただ、部分的に塗膜が厚くなってしまいますから、最後の研ぎ出しのことを考えると私はやらないと思います。ありがとうございます。
scale model maker, i would say
thank you👍