Well presented insert and a product that is functional. Anyone who has built a car from scratch would envy the easy of working on all angles. (Your watch was distracting, though.)
Good video, I think a little more time spent explaining the balancing. Depending on you're experience level it can be easy or send you to the emergency room. You should never do the balancing alone.
assuming this isn't sold anymore? don't see it on the site.. i built my own anyway, but was just curious of the details and price. not sure if I'd trust mounting on the bumper mounts.. especially with the car having the extra weight it does in the video.. the design is actually pretty similar to mine other than how i'll be mounting. i'll use the rear leaf spring shackle location instead.
only good if you have a concrete pad to roll around on. Why not have bigger wheels, not casters so one can take frame out of the shop to sandblast, paint, etc. Also, in South Texas, that would be one rusty mess in about a week.
where did this rotisserie come from? i can't find it available on their website and i am in need of one...i can find them and instructions on how to build one...but with this specific video with bolt sizes etc, this is particular to one kit/model. so where do i get this one and how much?
It will support the weight but I have never used one for a car with the engine and trans in it, I would make sure there are no fluids in either if you do.
Of course it can....how else’s are you gonna change all ur fluids at once....I say u get one totally recommend it that’s how I started my oil changing business...
The center bar lock bolts should have been put on side of tubing. Spin car when its not high enough those bolts would put nasty gouges in the sides of the car.
Its 7 feet with the 65 Mustang so I would say only a couple more inches for a 73. If you look at the video around 14:00 in that is the highest point and I am 6'2 for reference
Por favor disponibilize o seu contato. Gostaria de saber as condições para confeccionar um macaco giratório para restauração ou jateamento de carrocerias de carros de pequeno e médio porte. Abraços! Please make your contact available. I would like to know the conditions to make a rotating monkey for restoration or blasting of small and medium sized car bodies. Hugs!
احمدك ياعظيم ماشمسك اشرق وماغااب وشكرك يا اااااللهي ماااااااعدد يحتصيها والف اااااصلي ع طه النبي سيد الاحباب نوره اااشرق على الامه وباااالنور يضيها بعد ياااامرحبا حيااااا بذي طارق الباب ماااااادكم راااعد ااااالامطار واقبل دويها الف مرحب وحيا عدما اشرق وماغاب مرحبااااااااا يارسول وارحبت يا راسليها قال ولداحمد الجودات عادات الاعراب عادة اااااااااالقبيله واااسلافها كم هويها عادة القبيله تعتز من عز اااااالاصحاب والوفى واااااالكرم والعرف في ساكنيها والوفى طبعكم والعرف ياصلب الاصلاب ذي علا اااالعرز واااالناموس توصي بنيها واااالزمان هكذا وااالوقت مقلاب بمقلاب واااالفتن ياقضه وااااالنوم ماااازاد هنيها اااالحياه مدرسه تعليم وااااالناس طلاب بعديوم اااالنشور باااااتستلم رااااااتبيها ختمها بالصلاه تخشى النبي سيدالاحباب صل للمصطفى اااااااالمختار يا سامعيها الف اصلي عليه من ذكره القلب قد طاب نوره اااشرق على اااالامه والبنور يضيها بقلمي علي احمد صلاح المقدشي
@ You're not the smartest are you, how would you access the underside if you rotated the vehicle 360 degrees? How many degrees do you think he rotated it at 13:57
4 года назад
@@ricky302v8 You're going to tell somebody who has actually DONE it that they are not very smart??? How about getting your facts correct before publishing false information on RUclips for all to read!!! You are evidently basing everything on what this particular person did in his video. But that has absolutely nothing whatsoever to do with the actual capabilities of what can be accomplished with a rotisserie machine. I don't know what machine you have personally used, but the one I have turns 360 degrees which is essential for accessing every possible angle.
@ So you've done it? big deal! Lets quote what he said *'and rotate it 360 degrees so you have access to the underside of the chassis'* do you not realise that if you rotated it 360 degrees you would end up in the exact position you started from? I don't give a flying fuck if the rotisserie machine could fly to the moon, to get to the underside of the chassis you rotate it *90* degrees, exactly like he does at 13:57
I guess me,,,I'm the goof,,,lol,, I have restored 4 cars with mine ,,and you can't build one as cheap as you can buy one,,,if you value your time at all,,,nothing like changing floor pans or anything for that matter... But go ahead and build one Mr know it all,,and let us know how you make out..
🛠 Download our free guide: The tools you need to work on your Mustang! bit.ly/465MGQT
the end with the car on the side! excellent !! BLUFFANT !! BRAVOOO !!!
The lube over spray was later attended to by specialised BFG over spray remover which leaves a grippy rubberised surface after use.
its so cooolll . .. Hi from. Russia. 🤚
Certainly a nice piece of kit!
Классное приспособление👍
Well presented insert and a product that is functional. Anyone who has built a car from scratch would envy the easy of working on all angles. (Your watch was distracting, though.)
.
Good job!
Sittin sideways like dem boys in the dayz!!
Good video, I think a little more time spent explaining the balancing. Depending on you're experience level it can be easy or send you to the emergency room. You should never do the balancing alone.
Jim Zivny he should take off the tires and wheels as well. You want that car as light as possible.
Very cool , Very nice !
assuming this isn't sold anymore? don't see it on the site.. i built my own anyway, but was just curious of the details and price. not sure if I'd trust mounting on the bumper mounts.. especially with the car having the extra weight it does in the video.. the design is actually pretty similar to mine other than how i'll be mounting. i'll use the rear leaf spring shackle location instead.
ese rotador lo armate vos. por qué es muy bueno. y genial. y me encantaría armar uno. buen video
And later that day......somebody slips on the oil spray from 6:03. LOL
Has this been engineered tested and certified ??
only good if you have a concrete pad to roll around on. Why not have bigger wheels, not casters so one can take frame out of the shop to sandblast, paint, etc. Also, in South Texas, that would be one rusty mess in about a week.
Красавчик! Отличная при способа.
Bill do you sell this kit? and do you have an application for a 67 chevelle malibu.
Sorry we no longer offer the rotisserie.
great vid very informative thanks alot,, i love silly nitpickers on this thread xperts all im sure
Like how much for that ??
can u post the link so I can buy one
where can you get this kit? Went to their web site but its not very helpful. Actually need one for a first gen Camaro
Is that the original steering linkage? Looks like early Falcon.
excelente parabéns !!!!
where did this rotisserie come from? i can't find it available on their website and i am in need of one...i can find them and instructions on how to build one...but with this specific video with bolt sizes etc, this is particular to one kit/model. so where do i get this one and how much?
awesome
How do I send you guys a message on here? Just want to ask a question.
It could be used if the car had engine and transmission position?
It will support the weight but I have never used one for a car with the engine and trans in it, I would make sure there are no fluids in either if you do.
tanks
Of course it can....how else’s are you gonna change all ur fluids at once....I say u get one totally recommend it that’s how I started my oil changing business...
Привет ,будь так любезен,дай размеры контователя,и размеры профильной трубы,спасибо.
Must have not worked out well or cost too much. Its not on their website for sale. And I watched the whole video.
i watched the whole video also....smh
Can anyone send me tubing measurements?. AccesibleSystems and Klassic Kustoms are no more in bussiness. Greetings from Lima -Perú.
Thanks for your reply, however do you know of anyone who may have a used one for sale? I would realy appreciate that Thank you kindly.
The center bar lock bolts should have been put on side of tubing. Spin car when its not high enough those bolts would put nasty gouges in the sides of the car.
👍👍👍👍👍👍😎😎
Super genial
what's the part # for this rotisserie cannot find it on your website ?
Una chimba👍👍👍👍👍
buen trabajo
how much roof clearence do i need use this on my 73?
Its 7 feet with the 65 Mustang so I would say only a couple more inches for a 73. If you look at the video around 14:00 in that is the highest point and I am 6'2 for reference
thanks that helps alot
what company made the rotisserie?
What is the overall length with all of the adapters as shown in the video?
Putting the bolts in reeeeeeaaaaaalllllllllyyyyy ssssllllllooooowwww makes it more instructional, I guess... :D
It's good exercise
Watch this video in double speed!
🐓 not included 🔥
How much
Why not spring for a painted or power coated model ,
It adds just under 6 feet to the total length of the car.
HELLO WHERE CAN I BUY?
Por favor disponibilize o seu contato. Gostaria de saber as condições para confeccionar um macaco giratório para restauração ou jateamento de carrocerias de carros de pequeno e médio porte. Abraços!
Please make your contact available. I would like to know the conditions to make a rotating monkey for restoration or blasting of small and medium sized car bodies. Hugs!
This is one of their most popular videos and they don’t sell rotisseries anymore
É uma pena que não tem legenda
круто
The music is to loud when he's talking.
Hola muy bueno no me podes mandar las medias saludos desde argentina
Размеры можно продемонстрировать пожалуйста ?
All that welded square steel tubing and none of it painted? Powder coat it.
what music
احمدك ياعظيم ماشمسك اشرق وماغااب
وشكرك يا اااااللهي ماااااااعدد يحتصيها
والف اااااصلي ع طه النبي سيد الاحباب
نوره اااشرق على الامه وباااالنور يضيها
بعد ياااامرحبا حيااااا بذي طارق الباب
ماااااادكم راااعد ااااالامطار واقبل دويها
الف مرحب وحيا عدما اشرق وماغاب
مرحبااااااااا يارسول وارحبت يا راسليها
قال ولداحمد الجودات عادات الاعراب
عادة اااااااااالقبيله واااسلافها كم هويها
عادة القبيله تعتز من عز اااااالاصحاب
والوفى واااااالكرم والعرف في ساكنيها
والوفى طبعكم والعرف ياصلب الاصلاب
ذي علا اااالعرز واااالناموس توصي بنيها
واااالزمان هكذا وااالوقت مقلاب بمقلاب
واااالفتن ياقضه وااااالنوم ماااازاد هنيها
اااالحياه مدرسه تعليم وااااالناس طلاب
بعديوم اااالنشور باااااتستلم رااااااتبيها
ختمها بالصلاه تخشى النبي سيدالاحباب
صل للمصطفى اااااااالمختار يا سامعيها
الف اصلي عليه من ذكره القلب قد طاب
نوره اااشرق على اااالامه والبنور يضيها
بقلمي
علي احمد صلاح المقدشي
вау вот это я понимаю ....все пошел делать
wouldn't use this design even If w got it for free.
Me 2 n
Me 2 khi98u
Always suspend a car on the suspension points. Never on bumpers. Hoop rotisserie designs often are attached at suspension points.
Well just use it for chicken instead
They threw that 24mm in there just to screw with people...
Auto rotisserie’s have high resale value as well. When I was done with mine, I sold it for $100 less
Still in 19 centuries . Dude time to change all wolrd use metrics.
When working on an old Mustang or a classic muscle car we still use SAE bolts and nuts
Fuck your metrics...
00:22 90 degrees not 360.
WRONG!!! The rotisserie machine can rotate the entire body or frame 360 degrees!!!
@ You're not the smartest are you, how would you access the underside if you rotated the vehicle 360 degrees? How many degrees do you think he rotated it at 13:57
@@ricky302v8 You're going to tell somebody who has actually DONE it that they are not very smart??? How about getting your facts correct before publishing false information on RUclips for all to read!!! You are evidently basing everything on what this particular person did in his video. But that has absolutely nothing whatsoever to do with the actual capabilities of what can be accomplished with a rotisserie machine. I don't know what machine you have personally used, but the one I have turns 360 degrees which is essential for accessing every possible angle.
@ So you've done it? big deal!
Lets quote what he said *'and rotate it 360 degrees so you have access to the underside of the chassis'* do you not realise that if you rotated it 360 degrees you would end up in the exact position you started from?
I don't give a flying fuck if the rotisserie machine could fly to the moon, to get to the underside of the chassis you rotate it *90* degrees, exactly like he does at 13:57
Hi
big lost of time, no part number, can't find this on your web site, poorly done if you want to sell some you have to do better!!
chris land accesiblesystems makes better rotisserie
Че там брат как дела
You know, as dumb as it may sound I actually use these to store my classics :P
So do you store them all at 180 degrees lol
@@asamakowski8316 welll.... no. i have it on the ground like normal, but when it comes to working on them....
Добрый день. Можно у вас попросить чертежи этого устройства? pavel.shagarov@yandex.ru спасибо
dangerous....
Restoring cars isn't for sissies.
if your talented enuf to totally restore your car. youd think you would be able to make your own turning jig. what kind of a goof would buy this
I guess me,,,I'm the goof,,,lol,, I have restored 4 cars with mine ,,and you can't build one as cheap as you can buy one,,,if you value your time at all,,,nothing like changing floor pans or anything for that matter... But go ahead and build one Mr know it all,,and let us know how you make out..
This thing is too Chinese. They didn't even finish right the welding.